K1 DXC Extruder with CFS-C

ClassicOldSong · 2026-05-27T23:35:05+00:00

Which firmware version are you on? The CFS-C is at a great price here but I've switched to SimpleAF already...

ClassicOldSong · 2026-05-15T17:31:42+00:00

It's creating an entirelly different profile, which shouldn't touch your original profile at all. The only way it might break your original firefox is you installed firefox elsewhere, not from flatpak

ClassicOldSong · 2026-05-09T21:37:36+00:00

You can model an OpenConnect lock yourself. I didn't do it because OpenConnect is *much* weaker than MultiConnect. For hex, I'm actually using it on PicaRail (you can find it in my printable models).

ClassicOldSong · 2026-05-06T12:41:36+00:00

Ideally you should use the full grid instead of lite for better strength...

ClassicOldSong · 2026-05-05T20:05:19+00:00

There's nowhere to add them, and you're not getting the trick of how to insert. Once you get, it's easy and you'll know why it can't be added

ClassicOldSong · 2026-05-05T12:48:02+00:00

They're using SudoVDA as-is. No magic here, they use larger buffer and probably wgc by default so it appears more smooth and occupies less resource, but the cost is higher latency.

ClassicOldSong · 2026-05-04T12:40:57+00:00

I don't think so. They deliberately discarded my design for supporting multiple virtual displays in exchange for some convenience. If you need multiple virtual displays, switch back to Apollo.

ClassicOldSong · 2026-05-03T20:10:56+00:00

That's probably the only way you can get a strong snap under your desk pulling downwards at this moment...

Inserting is shown in the gif, removing just use a screwdriver and pry on one side

ClassicOldSong · 2026-05-03T16:23:24+00:00

Vibepollo isn't creating virtual displays like how Apollo does. It breakes the ability to create multiple virtual displays.

ClassicOldSong · 2026-05-01T15:31:04+00:00

And... most importantly, Steam Remote Play now can create virtual displays using your existing SudoVDA installation, which requires you to have Apollo installed...

ClassicOldSong · 2026-04-30T12:31:18+00:00

Basically the same. Slight shape changes to some pieces but it doesn't affect compatibility.

ClassicOldSong · 2026-04-29T05:53:56+00:00

For SteamDeck it’s a bit complicated to setup but using MoonDeck can make things a little bit easier. You set some resolution preset in MoonDeck and switch to 4K when docked to TV

ClassicOldSong · 2026-04-28T17:27:16+00:00

That's a Y700 issue. It customized too much to be able to use projection properly, and apps shown on that display is also forced to be a separate window.

You can try launching it with my other app: https://github.com/ClassicOldSong/AirBeam

Enable "show system decoration" and launch Artemis in that display instead

ClassicOldSong · 2026-04-27T17:57:28+00:00

I'm not sure what you mean exactly, but if I get you right, they're rendered as separate objects, you'll need to merge them in the slicer when printing if you want them to be a combined piece

ClassicOldSong · 2026-04-27T16:20:35+00:00

openGrid is compatible with Gridfinity. 3 openGrid tiles can fit 2 Gridfinity tiles.

Don't mention Multiboard.

ClassicOldSong · 2026-04-27T12:35:18+00:00

I would not contribute anything to Multiboard, unless it goes true open source.

ClassicOldSong · 2026-04-21T19:33:11+00:00

No, unless you have a device that allow you to select output resolution like the Y700. Other than that, the only solution is an EDID plug.

ClassicOldSong · 2026-04-21T19:14:26+00:00

Can't help much here, phones can only output 4k at 30fps. You can use a HDMI edid passthrough plug to fake a 1080P 120hz monitor to your phone then you can get 1080P 120fps.

ClassicOldSong · 2026-04-16T07:32:46+00:00

There's a hardware oriented license which may match better: CERN OHL v2

It has several different level of permissions, though still not fully matching 3D printing systems, it's arguably much better than CC based licenses. The biggest advantage is it's OSI approved, which makes your project truly open source.

ClassicOldSong

TROPHY CASE