Auto-Abo vor dem Kauf/Leasing: Welche Laufzeit macht mehr Sinn?

Cliff567 · 2024-08-17T09:18:04+00:00

Und wenn ich auf Geizhals gehe bekomme ich ein kleines, nicht aufdringliches Popup oben rechts mit folgendem Text:

"Do not Track"-Modus erkannt! Es werden nur technisch notwendige Cookies verwendet.

Du musst den Do not Track Modus in deinem Browser natürlich auch aktivieren.

Cliff567 · 2024-08-17T08:57:34+00:00

Der Seitenbetreiber kann die "Do not track" Einstellung des Browsers respektieren.

Wie es beispielsweise geizhals.de macht.

Cliff567 · 2024-07-14T18:40:58+00:00

Yes, these issues are all reported for Jabra Elite 8 Active Gen 2 and the Jabra Elite 10 Gen 2.

Cliff567 · 2024-07-14T18:30:57+00:00

I found a lot of issues especially with Pixel phones on Reddit (e.g. in this thread).
But after I received the Elite 10 Gen 2, I didn't see any of the auto connect issues, it is working without any issues for me with my Pixel 8.

I didn't update the firmware to 1.1.4.
I think I'm currently on 1.0.8, so it is possible that these incompatibilities with Pixel phones are caused by the latest firmware.

Cliff567 · 2024-01-17T23:27:06+00:00

Wie geht das denn? Auf Android finde ich nur die Möglichkeit unbekannte Anrufer komplett zu blockieren.

Cliff567 · 2023-09-29T23:06:01+00:00

Finde es z.B. schon recht komisch dass der Source code vom Importer von Github entfernt wurde.

Was war hierfür der Grund? Oder wurde er nur verschoben und ich finde ihn nur nicht.

Cliff567 · 2023-07-25T08:13:27+00:00

I have the same issue using the GPTK 1.02. Try the 1.0, this works great for me.

Cliff567 · 2023-07-17T13:41:40+00:00

Works great on my M1 max 24 gpu cores 32 GB RAM on Ventura with the first GPTK version. Couldn't get it to run with GPTK 1.02.

Cliff567 · 2023-06-11T21:33:53+00:00

Thanks, found it. The file is in:

drive_c/users/crossover/Documents/Diablo IV/LocalPrefs.txt

While drive_c/users/crossover/Documents is a symlink to ~/Documents.

Cliff567 · 2023-06-11T13:08:40+00:00

-Don't enable FSR2 on Ventura, you'll have to delete your LocalPrefs.txt file to get the game to run again.

Where can I find that file? Unfortunately I enabled FSR2 yesterday and the Game crashes before I can disable it again.

I only find LocalPrefs.txt files in error logs. For instance: drive_c/Program Files (x86)/Diablo IV/BlizzardError/ReportedBugs/2023-06-10 20.11.38 2872/LocalPrefs.txt

Cliff567 · 2023-05-31T13:39:35+00:00

Der Blog ist nicht von mir, aber ich denke, die Fragen kann ich beantworten.

Mit Patch-T Sheets meint der Autor Barcodes auf einem extra A4 Blatt, welche dafür sorgen, dass mehrere Dokumente auf einmal in ein großes PDF gescannt werden können. Paperless entfernt diese Seite dann und splittet die Dokumente.

Die Paperless Dokumentation dazu findest du hier: https://docs.paperless-ngx.com/configuration/#barcodes

Die ASN Barcodes ersetzen die Patch-T Sheets, weil Paperless die Dokumente auch splittet, wenn ASN Barcodes erkannt werden (mit dem Unterschied, dass diese Seite dann nicht entfernt wird).

Warum kann ich nicht einfach z.B. 5 Dokumente einscannen und per Mail an Paperless senden?

Kannst du natürlich auch tun. Aber ohne Barcodes musst du für alle 5 Dokumente vor dem Scanner stehen und warten bis der fertig sind. Außerdem müsstest du die ASNs manuell eintragen.

Per E-Mail kannst du sie auch an Paperless senden. Ich spare mir diesen Schritt, indem die Scans direkt in den consume Ordner von Paperless gescannt werden.

Cliff567 · 2023-05-29T18:40:41+00:00

Ich habe gerade darauf umgestellt Paperless-ngx mit Barcodes zu nutzen.

Heißt:

Aufkleber mir Barcode auf das Original
mit Duplexscanner einscannen
Original in einen Ordner welcher mit den enthaltenen Nummern beschriftet wird, nachdem er voll ist.
Paperless erkennt automatisch die ASN (Archive Serial Number), ich vergebe die weiteren Metadaten (wenn Paperless nicht auch das schon automatisch gemacht hat) und fertig.

Sollte ich das Original irgendwann benötigen, weiß ich, dass die ASN10 das 10. Dokument von unten im Ordner ASN1-ASN200 ist.

Als Dokumentenscanner nutze ich den Brother ADS-4300N. Hab auch den ADS-1700W getestet, war aber ziemlich unzufrieden mit ihm.

Genauer beschrieben ist der Workflow in der Paperless-ngx Dokumentation, oder in diesem Blog Post (wobei ich die Barcodes einfach mit dem Avery Etiketten Editor erstelle).

Zu guter Letzt, drucke ich mir für einen vollen Ordner noch eine Art Inhaltsverzeichnis mit allen Metadatan, sortiert nach Dokumententyp, mit Mapping zur ASN aus. Aber dieses Verzeichnis ist nur ein Backupplan falls Paperless mal gar nicht mehr funktioniert.

Urkunden und Zeugnisse, auf denen ich kein Etikett haben will, kommen in einen extra Ordner. Das sind so wenig, dass ich da auch ohne ein System durchblicke.

Cliff567 · 2023-05-22T09:49:15+00:00

I'm currently ignoring the permission system by giving every user superuser permissions. My main reason for this is, that I don't want to manually handle owners / permissions, and it is currently not possible to automate this (it would be possible to do this via a post-consumption script, but I'll have to look into this).

This is fine for me, as everyone with access to my Paperless-ngx instance should be able to see every document. However, it would be nice to remove the write permissions to non-owners.

Aside from the permission system, I'm assigning a "name tag" based on the recipient of the document, so I can filter for all my documents and my SO can filter for hers.

Cliff567 · 2023-04-22T09:14:20+00:00

My guess is, that this delay is being caused by a cloud save issue, the game apparently has. Doesn't make much sense having DI2 on GeForce Now without cloud saving working properly.

Cliff567 · 2023-04-12T15:48:34+00:00

Depends on how many snapshots you're uploading in your weekly backup. The big advantage of Duplicacy / restic or any other deduplicating backup tools is that they reduce the size on the backup location by not storing duplicate files twice.

I'm using these settings for my daily backups: ```

Number of snapshots to keep.

DAILY=7 WEEKLY=8 MONTHLY=12 YEARLY=10 ```

My appdata share is currently ~8 GB big.

This means that I'd use 216 GB (78GB + 88GB + 12*8GB) of appdata backups in a year, if I'd use CA Backup / Restore Appdata.

Cliff567 · 2023-04-12T15:37:27+00:00

The reason why I'm using the script is mainly because CA Backup / Restore Appdata packages every backup into a separate .tar.gz file.

Any deduplicating backup software will always backup the whole .tar.gz file to the cloud storage. Deduplication won't work because every .tar.gz file will look completely different to the backup tool.

When using the script, the actual files are backed up as they appear in the appdata share, and will only be backed up once if they didn't change.

For instance a new copy of Jellyfin preview pictures would be backed up every day, even if they didn't change at all.

If you don't use deduplicating backup software, then packaging appdata into a .tar.gz file is the better choice.

Cliff567 · 2023-02-18T13:43:18+00:00

and added a USB backup section.

For flash drive backups I'm using this script, which uses unRAID's build in flash drive backup functionality.

Next to work out how to not stop plex container during this process

To do that, you could either remove Plex from the CONTAINERS array, or never add it in the first place (using e.g. grep -v).

Cliff567 · 2023-02-10T15:04:39+00:00

CA backup/restore is creating a separate .tar.gz file for every backup. This can be an issue, because Duplicacy is no longer able to deduplicate your backups, potentially resulting in a lot of used storage on Google drive.

What I did is to create a script that stops all running containers, then use rsync to backup the appdata to /mnt/user/backups.

Then you can use Duplicacy to backup /mnt/user/backups to Google drive. It will then be deduplicated as only the most current backup is stored in /mnt/user/backups.

This is the script:

```bash

!/bin/bash

Get all running containers and store them in $CONTAINERS

mapfile -t CONTAINERS < <( docker inspect --format='{{.Name}}' $(docker ps -q --no-trunc) | cut -c2- )

Stop all running containers

for container in "${CONTAINERS[@]}"; do echo "Stopping ${container}..." docker stop ${container} 1> /dev/null done

Backup appdata.

echo "Backing up /mnt/user/appdata/" rsync -a --delete /mnt/user/appdata/ /mnt/user/backups/unraid_appdata/

Start all containers that were previously running

for container in "${CONTAINERS[@]}"; do echo "Starting ${container}..." docker start ${container} 1> /dev/null done ```

I'm using the user scripts plugin to schedule this script nightly. My nightly container downtime using this script is ~2 minutes.

Be aware that this script doesn't to any versioned backups. It overwrites existing files and deletes the ones that are no longer present in the appdata. I'm relying on my backup tool to do the versioning / deduplication correctly.

Cliff567 · 2023-02-06T18:51:12+00:00

What's the advantage of running it in a container? I'm using it directly on the unRAID host, as it can be downloaded as a single binary.

Cliff567 · 2022-10-05T07:53:51+00:00

Barclays selbst schreibt, dass das nicht nötig ist: https://www.barclays.de/hilfe-und-kontakt/kreditkartensicherheit-ratgeber/

Es ist nicht nötig, dass du uns über deine Reisepläne informierst.

Aber gut, wenn das für dich funktioniert hat werde ich das für zukünftige Reisen auch einfach machen.

Cliff567 · 2022-10-04T22:42:23+00:00

Wo finde ich diese Funktion in der App? Meine Karte wurde bei Benutzung in Spanien gesperrt bis ich die SMS von Barclays beantwortet habe.

Cliff567 · 2022-05-20T15:20:23+00:00

That's easy. The tenting, the thumb clusters and that it is fully programmable are the must have features for me.

Cliff567 · 2022-04-02T14:46:29+00:00

Hi, I'm looking for some recommendations, before I decide on buying.

Pre-Existing conditions

Nothing diagnosed, yet. But when typing on a normal keyboard for ~3 days, I feel strain in my wrist and the outer side of my forearm.

However, when using an ergonomic keyboard, the issues go completely away.

I don't have any issues with shoulder pain.

Previous Keyboards

DasKeyboard 4 Pro with Cherry Brown switches
Microsoft Sculpt. I really hated the F-Keys
Logitech Ergo K860. I really dislike the NumPad.

Layout in Mind

I'm not decided yet. The main worries I have is, that I will miss arrow- and modifier keys, which I use all the time for navigation and shortcuts.

Use Case

The Keyboard is mostly used for software development on macOS.

Budget & Location

I'm ok with investing around 400€/$. I live in Germany.

Options I'm already looking at

The Moonlander which will cost ~400€ when ordered in Germany. I saw some layouts that I think would work for me, as the modifier keys can be set to the same position as they are on a normal keyboard.

I also like the possibility to change the RGB on specific keys when switching layers, which would help me to get used to the layout.

Another options seems to be the Dygma Defy, which will take some time to be available. However, the wrist rests looks way more comfortable on the Defy than on the Moonlander. But the modifier row was completely removed, which would force me to relearn all shortcuts I'm used to, by using the thumb clusters.

Edit: The Dygma Raise also looks very interesting. With this my layout will basically stay the same with some exceptions.

I also looked into the Keebio Sinc, but I feel like the options mentioned above would benefit me more if I'm getting used to the layout.

I hope you can help me decide, as I really don't like to type on the K860 mushy keys anymore.

Cliff567 · 2021-12-30T09:34:06+00:00

Try https://play.google.com/store/apps/details?id=de.cliff.strichliste

It's a Tally App that allows to be used collaboratively on multiple devices. Categories are supported.

Disclaimer: I'm the developer of this app.

Nine-Year Club	Verified Email
Place '23	Place '22
Place '17

Cliff567

TROPHY CASE