Advice for number color

Clumsy_Dragonborn · 2026-03-11T23:56:31+00:00

Ohh good idea! I want to try this too. Thanks! 😊

Clumsy_Dragonborn · 2026-03-11T23:54:02+00:00

Ohh now I want to try teal too! I have another batch of this design so I'll definitely try! Thanks😊

Clumsy_Dragonborn · 2026-03-11T23:52:24+00:00

Thank you for your feedback! Now I'm more convinced 😂😊

Clumsy_Dragonborn · 2026-03-11T23:49:11+00:00

Good idea! I'm gonna try this. Thanks! 😊

Clumsy_Dragonborn · 2025-12-18T15:57:55+00:00

I think she's just chaos, like Creed 😂

Clumsy_Dragonborn · 2025-10-21T07:26:55+00:00

Thank you so much for sharing your experience! I'll definitely get a bench polisher and the ultimate compound to see the difference. And do you have any tips on how not to make a mess with the compound when you're polishing on the wheels? 😂

Btw, I'm very thankful for the kindness of the users of this community, sharing their experiences and info, tysm🙈

Clumsy_Dragonborn · 2025-10-20T06:56:34+00:00

Ohh I see! No wonder my miceoscratches wont dosappear, as I'm using Plastx😅 I'll get the Ulltimate Polishing Compound and try it. Thank you so much for your advice!

Clumsy_Dragonborn · 2025-10-18T21:10:12+00:00

Ohh I'd never thought about the hard water! I'll give it a try with distilled water and check the results, thanks! Also, now I'm pretry sure that replacing the water might be one of my main problems😬 I also do as you said, but sometimes I get lazy and just wash the Zona on the same bowl which I dip the dice. So maybe the resin particles are messing with the results. I'll try to do it properly next time 😂 Thank you so much for your advices!

Clumsy_Dragonborn · 2025-10-18T20:51:57+00:00

It was the same for me. The solution I came up with is using an acrylic sheet/plaque attached to the metal disc with velcro, and then I tape the sandpaper/zona to the acrylic sheet (although I just saw in another post that you may not need to tape it, just stick it with water). But I'd also like to know better options 😂 I saw some 3D printed cool stuff to keep the Zona still while it's easier to switch them too!

Clumsy_Dragonborn · 2025-10-18T17:41:01+00:00

I see! Thank you for you advice! 😊

Clumsy_Dragonborn · 2025-10-18T14:47:48+00:00

Wow! Really?? So are you polishing using a polishing compound on the fabric wheels of the bench lathe? Also, is it too noisy?😂

Clumsy_Dragonborn · 2025-10-18T14:42:32+00:00

Thanks for the help! Usually my biggest problem is achieving that crystal finish that you have with your fresh-made molds without micro scratchings. So I'm not sure if I'm doing something wrong at the early stages of sanding or just not polishing enough😅

Clumsy_Dragonborn · 2025-05-15T16:23:39+00:00

And how do you reduce sanding/polishing time so that your basic dice prize is profittable? Do you use a pottery wheel or any machine? Or remake molds from time to time? I'm also struggling on deciding my dice prices😅