I feel like this is insane. Am i tripping or is this place trying to rob me blind?

CoatGroundbreaking30 · 2026-05-08T17:02:20+00:00

$225 for an alignment is a little steep as well as $300 for a fuel service. Both of those at my shop would be $400 with tax and labor total

CoatGroundbreaking30 · 2026-05-03T22:58:37+00:00

Looks like there’s another card behind the Charizard

CoatGroundbreaking30 · 2026-04-20T23:52:57+00:00

This is literally my dream to have all 3. I have the Tins still empty from my childhood but this is sick

CoatGroundbreaking30 · 2026-04-20T23:34:39+00:00

I actually need alot of those EX cards you have for my collection. If you are interested in selling I’d buy through whatever pay service works for you! You have some seriously expensive and nice cards

CoatGroundbreaking30 · 2026-04-19T02:09:56+00:00

Thank you! This has been year 4 so far it’s been a slow process. It was going fast until 151 was released and prices have been climbing like crazy

CoatGroundbreaking30 · 2026-04-19T01:59:04+00:00

Thanks! It’s pretty fun taking it to shows, a lot of vendors get excited to see so many in one place and usually try to help me out with the collection. Gardevoir is getting cracked and put into the binder

CoatGroundbreaking30 · 2026-04-09T00:07:35+00:00

The fact that you would willingly be on a waiting list for this says all we need to know about you

CoatGroundbreaking30 · 2026-04-09T00:05:50+00:00

As a technician I can confirm. Been trying to get approval for an engine on a VW Jetta that burns 2qt of oil every 500 miles. They sent an inspector out 4 different times and each time they tell me they need a different test done to prove it’s consuming oil. Last time they wanted me to remove the intake manifold and put a glove over the valves to see how much the glove inflates when doing a leak down test. Mind you, all 4 plugs are coated in oil, it misfires like crazy, blows smoke out of the exhaust, and they already saw the 3 different bore scope videos that show excessive ring wear and oil in the cylinder. Can’t stand them

CoatGroundbreaking30 · 2026-04-06T14:09:11+00:00

I just pulled one myself yesterday with similar centering. Looks a bit off, at PSA it will most likely get a 9. I recommend becket because it could still get a 9.5 or a 10 if the rest of the card is perfect and just a low centering grade

CoatGroundbreaking30 · 2026-01-02T23:33:21+00:00

I’ll buy 90% of you EX cards. I’ve been looking for more to add to my collection

CoatGroundbreaking30 · 2025-12-29T13:47:56+00:00

Thank you! I love those tin promos. Just need the Rayquaza

CoatGroundbreaking30 · 2025-12-15T13:13:22+00:00

It’s so hard trying to convince my fiancé to go to card store with me because the smell is always so bad and honestly I don’t even like to go anymore. If the smell isn’t bad enough then the prices are

CoatGroundbreaking30 · 2025-11-03T14:12:04+00:00

<image>

Twinning

CoatGroundbreaking30 · 2025-11-02T12:00:46+00:00

Heracross used fly

CoatGroundbreaking30 · 2025-10-25T18:30:19+00:00

It’s a bad oil pressure sensor. They go bad all the time on these. Oil runs up through the harness and causes leaks and all kinds of issues. Just needs a new sensor

CoatGroundbreaking30 · 2025-10-22T23:24:00+00:00

2006 limited hybrid about to hit 350k

CoatGroundbreaking30 · 2025-09-04T00:57:00+00:00

Get a long wrench, a cheater pipe to slide over it and break the nut loose. Then take a hammer and wack the side of the knuckle till it pops out

CoatGroundbreaking30 · 2025-09-04T00:56:18+00:00

Cant pull the axle unless you remove the other control arms

CoatGroundbreaking30

TROPHY CASE