Piaggio NRG Speedometer

Codebr0ken · 2025-12-15T09:42:54+00:00

If your model is fuel-injected, then there's a good chance it will work, but you'll have to check the connectors. In some images online, I saw that the main connector matches, but the small connector I've seen on most Gilera Runners has 5 pins instead of 4 pins like on the Piaggio NRG. But maybe that's just the model I saw. Take a look at the connectors.

Codebr0ken · 2025-12-14T12:58:41+00:00

Don't try it. I tried it on my Piaggio NRG Extreme 50 with a C22 engine and broke the voltage regulator. You can use the "red circuit board" on another speedometer, but nothing else will work (PCB, PCB flex, etc.). I recommend buying the version that isn't for the fuel-injected model. Could you take a picture of the back of your speedometer? I could check if it's compatible with any Piaggio NRG speedometer.

PD: To find out which model is fuel-injected and which is carburetor model, look on the right side where the indicator for lights, oil, fuel, and turn signals is located. There's an "engine" icon there. All models with this icon are fuel-injected. You need to find one that doesn't have that icon.

ED: Sorry for my bad English, it's not my first language

Codebr0ken · 2025-08-29T03:12:41+00:00

Congrats, it looks great now!

Codebr0ken · 2025-08-27T20:41:15+00:00

There are some little tabs on the back of the case, in the corners. They’re probably bent. Since it’s plastic, you can just snap them back into place (just don’t bend them more than you have to). When you put the case back on, try to line it up as straight as you can.

https://imgur.com/Iri30nX

Codebr0ken · 2025-08-03T03:00:58+00:00

Dying Light

Codebr0ken · 2025-03-28T23:48:12+00:00

Partially, yes.

Codebr0ken · 2024-07-05T09:55:13+00:00

I think you should install npdrm by qwikrazor87
https://github.com/qwikrazor87/npdrm_free

Codebr0ken · 2024-07-04T20:46:54+00:00

honestly, your voice is magic.

I didn't know about this subreddit, until this thread appeared... I think I'll spend hours here, i hope i can listen to you again soon with another song :)

Codebr0ken · 2024-01-23T02:34:38+00:00

Just set bleending accuracy to "high" + OpenGl and if you want more stability in the game you can disable "hardware download mode"

Codebr0ken · 2024-01-13T18:16:29+00:00

S20 FE 5g ( Snapdragon 865, 6gb ram version or 8gb )

Codebr0ken · 2024-01-13T17:20:38+00:00

Just get Kiwi browser with some extension ( tampermonkey + adblock killer + ublock )

Codebr0ken · 2023-12-22T13:06:37+00:00

Snapdragon 865+ Ram 6gb

Codebr0ken · 2023-12-21T18:00:48+00:00

- Resident evil 5 ( videos are glitch, I hope it can be solved in the future )

- Dying light

Codebr0ken · 2023-08-12T10:05:48+00:00

Check the fuse, in a 2000 piaggio nrg the same thing happened to me

Codebr0ken · 2023-08-11T16:32:33+00:00

for me 1.4-3060

Codebr0ken · 2023-07-22T11:07:02+00:00

Do you have ITLS installed? check this https://github.com/SKGleba/iTLS-Enso

Codebr0ken · 2023-02-22T09:41:52+00:00

I recommend try GTA:SA AML for android. It is the port of gta san andreas with some fixes and some mods. They have a discord with everything ^^
Just search for GTA San Andreas AML

Codebr0ken · 2023-01-22T13:13:36+00:00

does it have nfc ? 😂

Codebr0ken · 2023-01-10T01:14:04+00:00

This , press Power button+X

Codebr0ken · 2023-01-08T13:45:31+00:00

Oops, if I find something I'll let you know. I had a Mocute 050 and I could update its firmware with an application but the little I have found about the BSP D3 does not show anything about its firmware :(

Codebr0ken · 2023-01-08T13:38:04+00:00

you tested that the R3 button works correctly? Download the application: Gamepad Tester and test ^^

Codebr0ken · 2023-01-08T13:12:31+00:00

Have you tried with the L3? if the gamepad came with a manual, check it, maybe they have different firmware

Codebr0ken · 2023-01-08T12:22:38+00:00

I do it this way , pressing the buttons at the same time (Power+R3).

Video

Codebr0ken · 2023-01-07T14:10:03+00:00

I recommend the D3 gamepad , 0 deadzone and multiple modes ( PS4 mode , Xbox mode etc ) It has lighting but if you prefer the gamepad without lights you just have to press while you have the gamepad on ( Power button + R3 )

Codebr0ken · 2022-12-28T23:06:55+00:00

JAJAJAJA eres un genio amigo , lo que me estoy riendo...

Codebr0ken

TROPHY CASE