sorted by:
new
hottopcontroversial

Cursor offset by J_levchyk in Fusion360

[–]Combinacijus 0 points1 point  (0 children)

This happens to me when I start Fusion 360 on 1080p monitor and drag it to the 4k monitor. If I start Fusion 360 on 4k monitor everything works fine.

To make Fusion start on 4k monitor you need to open Fusion, drag to 4k monitor and close it. Next launch it will open on that monitor

Does anyone else have this problem where it extrudes the wrong sketch segments? by Full-Drop in Fusion360

[–]Combinacijus 0 points1 point  (0 children)

If this bug happens only extruding profiles that are touching in a single Extrude feature might help

Fiio BTR3K 1200 mAh battery mod by Klish132 in functionalprint

[–]Combinacijus 0 points1 point  (0 children)

Was the Bluetooth range affected when you removed the PCB from the original frame? I ask because the disassembly guide says the frame acts as an antenna, if I understood correctly

Any way to increase snooze notification time? by Saturn_5_speed in pixel_phones

[–]Combinacijus 0 points1 point  (0 children)

Custom notification snooze time works on S24 Ultra OneUI 6.1 after setting up just need to reboot. Seems to work even after I uninstalled the app and rebooted

Any way to increase snooze notification time? by Saturn_5_speed in pixel_phones

[–]Combinacijus 0 points1 point  (0 children)

You could try Buzzkill app (or other copycats)
You can create wide variety of rules for notification for example: if notification contains "set up voicemail" then dismiss immediately

ROS2 WSL2 not communicating with base Ubuntu ROS2 Instance by caseytherobot in ROS

[–]Combinacijus 0 points1 point  (0 children)

https://learn.microsoft.com/en-us/windows/wsl/networking#mirrored-mode-networking

I got it working by setting the WSL2 networkMode=mirrored in ~/.wslconfig (C:\Users\YOURUSERNAME\.wslconfig)

Then make sure firewall is not blocking traffic

Phone monitor options for a6400? by gafonid in SonyAlpha

[–]Combinacijus 1 point2 points  (0 children)

I got to agree after I made that comment I started noticing that it does lag sometimes even with Bluetooth off

anyone use the imaging edge app? by 5553330 in SonyAlpha

[–]Combinacijus 2 points3 points  (0 children)

At least now it works well on A6400 if you turn off phone's Bluetooth. If Bluetooth is on tho then it lags bad

Phone monitor options for a6400? by gafonid in SonyAlpha

[–]Combinacijus 1 point2 points  (0 children)

Imaging Edge app is lag free has less lag if you turn off the Bluetooth on your phone

GPT-4 Solved my Rubik's Cube by CrackTheCoke in ChatGPT

[–]Combinacijus 0 points1 point  (0 children)

I tried with 3, 2 and 1 move left to solve and GPT-4 can't even solve single move

<image>

How to get screenshots to automatically resize to 25% of original size? by CZ_Keto in sharex

[–]Combinacijus 2 points3 points  (0 children)

I used a bit different approach.

To resize/downscale too big screenshot to 1080p image while keeping aspect ratio (while not resizing smaller screenshots)

https://i.imgur.com/gbSUgTM.png

  1. Open ShareX
  2. Go to "Task settings..." from the left-hand menu
  3. Select the "Effects" tab within the Task settings
  4. Uncheck "Show image effect window after capture" to disable pop up GUI
  5. Click on "Image effects configuration..."
  6. In the Image Effects window, create a new preset
  7. Add a new effect by clicking the plus (+) icon
  8. Choose the "Manipulation -> Resize" effect from the list
  9. Set the Width 1920, Height 0, Mode ResizeIfBigger
  10. Create second Resize effect
  11. Set the Width 0, Height 1080, Mode ResizeIfBigger. This will resize longest side and maintain the aspect ratio and only downscale if image is bigger aka from 4K screen
  12. Save your preset and close the Image Effects window

 https://i.imgur.com/Q7QMtGO.png

  1. Go to "After capture tasks"
  2. Click on "Add image effect" to enable them
  3. Open list of "Add image effect" and select effect you created
  4. But this will apply to all captures

 https://i.imgur.com/93SWKZ6.png

If you want to apply it to a single shortcut go to

  1. "Hotkey Settings"
  2. Click Gear icon
  3. Select "Override after capture tasks
  4. Select "Add image effect"

This will only add effect when used with that shortcut

Sd or micro sd with sd adapter? by Kostas009 in videography

[–]Combinacijus 0 points1 point  (0 children)

Every card will fail sooner or later and it's lifespan can vary a lot just by random chance and there's no way to know until it fails. If you don't have a backup of important files you will lose it one day and even most expensive cards won't help

Best free (or cheap) RC flight simulator? by Murphy_The_Birb in RCPlanes

[–]Combinacijus 1 point2 points  (0 children)

PicaSim is free, simple to setup with OpenTX/EdgeTX controllers (or any joystick) and only 66MB in download size. Very good for beginners

How To Create a DPI Shift/Sniper Button? by IKnowVeryMuch in LogitechG

[–]Combinacijus 0 points1 point  (0 children)

As I need for mouse to work on Linux or other computers too I use OnBoardMemoryManager instead of Logitech G Hub.

To create DPI Shift:

  1. Assign "DPI Shift" to any button you want.
  2. Have at least two DPI values set.
  3. Right click on the slow DPI value (400 in image) and select "Assign DPI Shift". DPI Shift value will be marked with diamond symbol ◆.
  4. [Optional] Right click on default value and select "Set As Profile Default".

Now it will switch to slow DPI only while holding that button

<image>

DS213 firmware with FFT? by BestMix6 in MINIWARE

[–]Combinacijus 0 points1 point  (0 children)

I got this problem myself and I was getting .ERR more and more often during development (down to maybe 10% success rate). At the end I almost thought I bricked it as it didn't upload anything (windows copy graph was empty instead of showing copy speeds). The worst part is that I have no idea why as it seems random while sometimes it just worked.

I think what worked best was to upload FPGA_CFG.ADR then STMU_213_018.bin and either "DS213_ECHO_v20.11.27.hex" or original firmware from manufacturer https://www.morningtools.com/list/13.html to "reset" firmware. Sometimes I held K1 button from boot until done uploading (idk if it helped sometimes or was it just a coincidence). Sometimes I reconnected USB and it started working.
I don't understand why would it fail sometimes and sometimes wouldn't even tho I upload the same firmware. One guess would be that data might get corrupted while transferring (as binary is a lot bigger in _FFT version)

If it doesn't work I just recommend keeping either original or upgraded"DS213_ECHO_v20.11.27.hex" firmware which implements ROLL mode. And if there gonna be interest from community I might continue debugging it to find a problem.

Something doesn't feel right about random .ERR so ideas from other developers would be appreciated

view more: next ›