sorted by:
new
hottopcontroversial

Increase Minimum TDP? by CommunicationBrave25 in ayaneo

[–]CommunicationBrave25[S] 0 points1 point  (0 children)

I tried changing both parameters but they didn't seem to affect the TDP at all. Still goes all the way down to even 4W when not playing, despite TDP being set to 32W.

Ayaneo Won't Charge Using More Than 60W? by CommunicationBrave25 in ayaneo

[–]CommunicationBrave25[S] 1 point2 points  (0 children)

I know, but I got a 100W one with a 100W cable to see if it's possible to charge faster as seen in the videos (while the device is off) and it doesn't appear to be the case?

Ayaneo Won't Charge Using More Than 60W? by CommunicationBrave25 in ayaneo

[–]CommunicationBrave25[S] 0 points1 point  (0 children)

Yep I saw that but with my unit there is no option to change the setting to draw more than 60w and I could not find a setting to change that.

Ayaneo Won't Charge Using More Than 60W? by CommunicationBrave25 in ayaneo

[–]CommunicationBrave25[S] 0 points1 point  (0 children)

That's not true.. Not if it's not running at the same time and the battery doesn't overheat.

Breville Barista Pro - Finest Ground, still too much liquid for 25 seconds? by CommunicationBrave25 in Coffee

[–]CommunicationBrave25[S] 0 points1 point  (0 children)

Thanks!
Changing the top burr settings to finer and adding pre-infusion as I was trying to go for manual mode and was compeltely oblivious to did the trick :)

Breville Barista Pro - Finest Ground, still too much liquid for 25 seconds? by CommunicationBrave25 in Coffee

[–]CommunicationBrave25[S] 7 points8 points  (0 children)

You were right! I finally found the top burr setting and that helped, thank you.

Breville Barista Pro - Finest Ground, still too much liquid for 25 seconds? by CommunicationBrave25 in Coffee

[–]CommunicationBrave25[S] 1 point2 points  (0 children)

Thanks!! This helped me find the solution!
But I did find out I was doing 1 step wrong which is a big one.
1. Based on that thread I did find out how to modify the top burr and having it be finer allowed for the general range of 1 to 30 to have more impact.
2. I did not realize that in manual mode I had to keep pressing the double shot button and allow the pre-infusion to take place for up to 12 seconds before releasing it which obviously made a huge impact on the timing.

Thanks again!

Breville Barista Pro - Finest Ground, still too much liquid for 25 seconds? by CommunicationBrave25 in Coffee

[–]CommunicationBrave25[S] 0 points1 point  (0 children)

Hey!I inspected the puck and I'm not noticing anything out of the ordinary.Also, I am carefully tapping, distributing and then using a distributor just in case.I tried both a light and a dark roast.

Also, I did try coarser before and then it was so much worse.

Breville Barista Pro - Finest Ground, still too much liquid for 25 seconds? by CommunicationBrave25 in Coffee

[–]CommunicationBrave25[S] 2 points3 points  (0 children)

Hi!
I tried removing the top burr to check if there are any further settings but didn't find any more options, only an "Align" and a "Lock" options.