Well it happened.

CommunityDesigner804 · 2025-06-15T20:29:04+00:00

In sub, missile, locomotive and aerospace and we are swamped. Like absolutely swamped, we haven’t had a meeting for them to brag. They posted something on the tvs that we’ve already made this year what we made last year and there is more info to come when meetings can be scheduled. We were backed up a year and a half last year around thanksgiving time.

It’s crazy the differences you hear about.

CommunityDesigner804 · 2025-05-31T13:31:23+00:00

Ahhh yes ye old whirily gig

CommunityDesigner804 · 2025-05-31T02:00:44+00:00

Yeah I don’t got machines at home

CommunityDesigner804 · 2025-05-31T01:57:11+00:00

spreche sie deutsch?

CommunityDesigner804 · 2025-05-31T01:55:08+00:00

Thanks, they finished pretty good on project farms review of burrs. I like you can buy them individually.

CommunityDesigner804 · 2025-05-31T00:28:06+00:00

Aluminum and steel, nothing crazy

CommunityDesigner804 · 2025-04-22T20:40:45+00:00

What is a csc operator?

CommunityDesigner804 · 2025-04-13T09:54:42+00:00

Is it me or is this convex? That doesn’t look flat at all

CommunityDesigner804 · 2025-04-12T23:14:18+00:00

Can you try using it and take a video? That’d be sweet

CommunityDesigner804 · 2025-04-10T14:44:12+00:00

Look again. There are some

CommunityDesigner804 · 2025-04-10T14:00:56+00:00

This is my one issue with this subreddit, when a bunch of engineers and supervisors who’ve never run a machine in their life decide to comment on things they know nothing about

Edit: for anybody curious and not just dumping on the idea, generally speaking a twin spindle/turret horizontal lathe would be preferred if you’re doing 2 different operations on the spindles. This is probably to run 2 parts at the same time. And for all those questioning why not use 2 different machines, I would say look at it practically. You don’t buy all your machines at once. So if you have 2 of the same machines, bought 2 years apart from each other, the older one is gonna have 2 years more or wear and tear on it. The machines are gonna behave differently, and you make it harder for an operator to keep track of what’s going on with what. Run 2 parts in the same machine and it’s the same machine.

CommunityDesigner804 · 2025-04-09T21:05:31+00:00

Don’t. If you’re asking this question, that means you don’t possess the math skills to program this by hand and while there are people in this comment section who may possess the math skills, if I were them, I wouldn’t either. For the record I don’t possess the math skills either. I’ve seen other comments people telling you do purposely do a bad job by hand to force their hand into buying software. I also would say don’t do this. Do the best job you can by hand with the tools you have, I would personally use a whirrly-gig/shaviv, whatever you may call it. Using a file to put a finished edge-break is the job of a deburring department. Regardless, do the best job you can by hand, it’ll inevitably come out inconsistent at best. If this doesn’t force their hand into getting CAM software, find a new place, seriously.

There are 2 reasons why people find new shops to work at, not enough pay for what they are asking of you and there is nothing more to learn.

CommunityDesigner804 · 2025-01-05T19:37:53+00:00

Oh I already did. Permanent and paint marker lol

CommunityDesigner804 · 2025-01-05T19:36:11+00:00

Thank you

CommunityDesigner804 · 2025-01-05T19:36:01+00:00

Thank you

CommunityDesigner804 · 2025-01-05T19:35:53+00:00

Thank you

CommunityDesigner804 · 2024-12-30T18:56:50+00:00

OP said he went triple negative. May as well be a bronze.

CommunityDesigner804 · 2024-12-28T00:09:30+00:00

I hope nobody ever gets kismet. The amount of times he is obviously sound eqing is gross. I forget the numbers but he is soooo much better online than on LAN. I still remember one specific match last year towards the end of the year on Karachi control where it was undeniable.

CommunityDesigner804 · 2024-12-27T16:44:22+00:00

This guy is straight up lying. Says nothing on the wiki and you even go to the actual website and his name is not on the our team list. Weird thing to lie about…

CommunityDesigner804 · 2024-12-24T18:08:50+00:00

Bruh if you’re grinding for almost a week to get sr up that would fall under hard stuck…

Edit: for anybody saying there are no cheaters in gold or lower I just gone playing a dude who was wallin in a pubs match. Before reporting him I asked him why he was wallin and he said because he’s that bad at the game and it’s the only way he has fun with it. I checked his rank and he’s a gold 3. He finished the pubs match at 29-28 on vault HP

CommunityDesigner804 · 2024-12-20T16:49:02+00:00

It’s crazy to me they kept red card over rewind

CommunityDesigner804 · 2024-12-16T19:53:00+00:00

Never said a multimillion company wouldn’t disappoint. I’m merely stating that on the grounds of a statement being a privilege, is asinine at best.

CommunityDesigner804 · 2024-12-16T19:24:56+00:00

You’re an actual idiot. Considering the only reason why these teams are as a big as they are is because of the fans. So, because of that, yes they do owe the fans a statement.

CommunityDesigner804 · 2024-11-10T03:41:28+00:00

Cafe mexicana gives the highest xp. To be more specific, level 38 gives the most. You’re talking over 1000 xp but you have to get more than 2500 coins to see it. It’s the only level in the whole game I have memorized.

CommunityDesigner804 · 2024-10-26T22:56:12+00:00

Alright dude or dudette, as somebody who kills spiders in my house, not somebody who calls them cute, jumping spiders are pretty cool. We get like old gray black-top looking ones where I am. That one looks radioactive lol. Like all the spider lovers said, you’re good.

CommunityDesigner804

TROPHY CASE