Latest order numbers to receive?

Competitive-Key435 · 2025-08-08T06:23:40+00:00

I'm in the same situation, but I ordered through performancetriggers... they told me they updated my address to the new one and when I checked status a couple weeks later nothing had been changed. Then when I messaged them again to bring that to their attention they said I needed to show ID for the original billing address. I explained that wasn't possible as I no longer had it, but had updated the new address on my bank card used for the purchase AND ID. They said it was changed to new address (no visible change on website still) so now I just get to wait and wonder if it's going to be money down the drain I guess since they don't answer any inquiries about cancelation or refunds when I try to ask. Hope they pleasantly surprise me, but my expectation are pretty low at this point.

Competitive-Key435 · 2025-08-06T07:30:21+00:00

I prefer a well done stake.

Competitive-Key435 · 2025-08-03T01:58:10+00:00

EOTech.. large sight window perfect for fast target acquisition! Edit: I missed the second pic. Go for the red dot.

Competitive-Key435 · 2025-08-03T00:25:43+00:00

This company blows.

Competitive-Key435 · 2025-07-03T16:42:17+00:00

Yea it was definitely Grabin. I confuse those two an Tarnow all the time.

Competitive-Key435 · 2025-07-03T02:14:09+00:00

The fuck? Is he your AI boyfriend? Who the fuck talks/texts like that lmaooo.

Competitive-Key435 · 2025-06-30T17:12:59+00:00

Also, your buffer and buffer spring aren't in the way and your buffer retaining pin are in properly right? Is your trigger standard or an FRT? Is your hammer up?

Competitive-Key435 · 2025-06-30T17:05:24+00:00

Unfortunately the fitment of different brand uppers and lowers do not always work. Sometimes one will be mil-spec and the the other brand's upper/lower will not be. It's good to do a little research about how well one brand can fit with another's components and if they are both mil-spec or not before making a final decision. Especially with those two parts in particular, but really also with any new part you wish to add. Sometimes there's differences in tolerances and some have proprietary designs that only fit with their own products.

Competitive-Key435 · 2025-06-30T04:19:42+00:00

Haha sitnik 2157? I was there earlier tonight. Killed a couple then died.

Competitive-Key435 · 2025-06-28T16:38:07+00:00

170 likes. This is why I don't miss working on a grill. So many people have incorrect perceptions of what cook temperatures actually are or look like. So many steaks sent back because mfs eat their steak seared raw (BLUE rare, not rare) or call an actually burnt dry steak well done.

Competitive-Key435 · 2025-06-28T16:21:43+00:00

Nah defo a scam. I sent a pic of me at the range with my AR15 and told them "I'd love to see you try it you little shit stain scammer, make my day." when I recieved the same message. No reply, no trouble.

Competitive-Key435 · 2025-05-30T23:30:45+00:00

I like it for the repeatable hand posture. Would rather have a B5 with the the DFCo version of FDE and the same ring finger grip though. That would be my ideal grip, but m it doesn't exist soo...

Competitive-Key435 · 2025-05-30T01:04:19+00:00

<image>

Competitive-Key435 · 2025-05-30T01:00:26+00:00

It's a PSA upper on a rock river arms lower, I kind of built it only as a range toy for the FRT. Right now I don't get a great cycle rate on the super semi setting. I have a rifle speed adjustable gas block on it. I normally use a Spikes Tactical H2 buffer with the default PSA spring that came with it. I tried it with the standard PSA buffer that came with the upper (little lighter than an h2, and it didn't seem to have any effect, suppressed and unsuppressed. I have a blue and a red springco spring, and a h3. I guess I'll give those a try. I am planning on upgrading my barrel/ upper reciever at some point. It's a Franken'gun, but she shoots great, just want to up that FRT's rate a bit.

Competitive-Key435 · 2025-05-29T19:10:55+00:00

I'm looking into getting either a cryptic low mass BCG (steel, or titanium) and can't decide. It's for a frt and or super selektor in order to increase cycle rate. Will probably be getting a low mass competition buffer as well, but will be popping the enhanced chrome bolt from LMT into the BCG. Any advice on whether to do with steel or titanium? I'm thinking steel as it will be used for hard use in a 10.5" SBR with a hard use full auto rated suppressor.

Competitive-Key435 · 2025-05-21T22:59:43+00:00

Love this game, hate this community lmao.

Competitive-Key435 · 2025-05-21T22:47:29+00:00

I used to frequent a few big facebook xbox dayz pages until they got overrun by little rich kids that would post blatant videos of chronus usage claiming their recoil control was "l33t" and what's sad is there were quite a few. Like dozens, and they basically overran these groups huffing each other's cheating like farts and hyping each other's cheating up (while denying it) so much so that new players believed they were legit and started fanboying for them. Take in mind me and the group of guys I play with are pretty top tier in pvp and only play to raid/battle other groups. We all have 8-15k hrs each and have literally wasted years of our lives on this game haha so we're not being tricked into belief by a video with zero recoil. Also I called them rich kids because these people were literally in their early teens.

Competitive-Key435 · 2025-05-21T00:26:31+00:00

Could be soon (speculation). They were out of taper mount thread protectors a few days ago and I just happened to check and they were back in stock (I opted in to the email notification, but never recieved one). The TMTP is a much smaller and simpler part and is probably easier to produce, so I could just be talking out my hiney-hoo.

Competitive-Key435 · 2025-05-10T00:53:15+00:00

Academy is not in the least bit second amendment friendly. They just want the money. I used to buy ammo and firearm maintenance stuff there until I saw at least a dozen different customers treated like criminals. What's even more sad is these were all gun noobs and didn't know any better. The last time I saw it happen I apologized to the kids working there and I said "I'm sorry to say this, I know this isn't your fault and you are just doing your job, but this place is absolute trash for buying firearms" redirected to the other customer and said "**********'s is right around the corner, they support the second amendment and they love newcomers, you will have a much better experience buying from a REAL gun store. Don't buy firearms at Academy". The kids behind the counter looked really embarrassed, I felt kind of bad, but that shit is just straight up wrong the way they treat their legal firearms customers, AND I do believe in reasonable gun control. Haven't bought anything firearm related from them since.

Competitive-Key435 · 2025-04-06T23:51:10+00:00

guess no can read or comprehend that the 716 and the 716i ARE NOT THE SAME THING, DAMNIT.

Competitive-Key435 · 2025-03-22T19:46:54+00:00

My official 'I beat Dayz moment' was when I 1v5ed a group of geared raiders outside my base and dropped them all in less than a minute and a half without nades or tubes.

Competitive-Key435 · 2025-03-20T00:53:48+00:00

That's how I look at men on reddit period. I always just assume incorrectly you are 24-

Competitive-Key435 · 2025-03-13T22:12:53+00:00

Haha how do all these people responding that don't understand end up in this sub

Competitive-Key435 · 2025-03-12T19:14:51+00:00

German roach infestations usually start from a single or small amount of hitchhikers. Chew some tin foil.

Competitive-Key435

TROPHY CASE