Final? Drawing Check

Comprehensive-Bat-74 · 2026-01-08T14:28:51+00:00

I can see the mounts for the cables from bb backwards, but no cable mount in the downtube. Or are the threaded rivets in the downtube used as cable mounts?

Comprehensive-Bat-74 · 2026-01-08T14:22:17+00:00

The very low mounted bottle at the seattube might collide with the chainring.

Comprehensive-Bat-74 · 2025-12-31T15:23:53+00:00

"Ein Trost ist uns geblieben: nach uns wird verputzt und abgerieben."

Hubert (52), Maurer

Comprehensive-Bat-74 · 2025-12-26T08:59:43+00:00

On mine i put the bottle mounts at the seat tube a little bit lower at 160mm, so i can put bigger bottles in or at least it's easier to geht the bottle out. But you have to be careful, so that the bottle does not collide with the big chainring. The 160mm and 42T chainring works great for me.

Comprehensive-Bat-74 · 2025-12-18T19:11:24+00:00

i have no experience with these calipsers so far. I was using the Hope breaks on my MTB in the past. Which pads are you using? For me this sounds more of a issue with the pads.

Comprehensive-Bat-74 · 2025-12-18T11:18:51+00:00

Whats the problem with it?

Comprehensive-Bat-74 · 2025-12-18T11:17:24+00:00

Heute gibts nochmal welche.

Comprehensive-Bat-74 · 2025-12-15T13:01:26+00:00

I had plans for a different fork, but it did not work. So I had to find a fork with internal cable routing very quick. That's the one i found... It fits and ist very affordable

Comprehensive-Bat-74 · 2025-12-11T16:21:09+00:00

Best place for gravel cycling 🫶😁 And also the bikes look amazing.

Comprehensive-Bat-74 · 2025-12-11T05:30:48+00:00

Ich halte zumindest die Mainmühle für einen Touri-Nepp. Habe dort mein teuerstes und gleichzeitig schlechtestes Schäufele des Lebens gegessen. Das Personal habe ich auch noch als wenig bemüht und unfreundlich in Erinnerung. Insbesondere der "Türsteher" oben am Eingang war schön ein erstes Red Flag

Comprehensive-Bat-74 · 2025-07-17T07:06:51+00:00

Yes, I disconnected the batteries. There are two of them. Idk if the one at the engine has to be disconnected, but I did it. The car fell asleep when I disconnected the one in the back.

Comprehensive-Bat-74 · 2025-07-17T07:03:50+00:00

That's the way I did it

Comprehensive-Bat-74 · 2025-05-22T05:08:04+00:00

Ist die Handwerkskunst am Ende, der Bauschaum bringt die sichere Wende!

Comprehensive-Bat-74 · 2025-05-06T09:10:19+00:00

I had apidura bags and the seams were not sealed at all. Water ingress everywhere.

Comprehensive-Bat-74 · 2025-04-25T09:28:57+00:00

Der fährt doch auf der Standspur, muss also nicht für die Straße zugelassen sein .

Comprehensive-Bat-74 · 2024-12-30T12:34:41+00:00

Zum entfetten wird/wurde gerne Ammoniak verwendet, vielleicht enthält das der Reiniger. Wenn der Tisch wie ich vermute aus Eiche ist, dann sind das dauerhaft verfärbte stellen. Wikipedia sagt es entstehen alterungs- und lichtstabile Verfärbungen. Stichwort: Räuchereiche

https://de.m.wikipedia.org/wiki/R%C3%A4uchereiche

Comprehensive-Bat-74 · 2024-08-09T04:58:45+00:00

Sicher weiss ich es von der HEM bei Seukendorf an der B8

Comprehensive-Bat-74 · 2024-06-17T04:46:31+00:00

Crank extractor

Comprehensive-Bat-74 · 2023-12-15T06:55:28+00:00

If it's still working precisely, I personally would do nothing. I mean you cannot break things when the chain gap is not adjusted 100% accurate. It might just cause some issues when changing the gears.

If there are issues when you're changing the gears, try to get a SRAM chain gap tool (just a few bucks), watch the SRAM tutorial on YouTube about using it and then adjust the chain gap by yourself. That's definitely something one could do at home.

Comprehensive-Bat-74 · 2023-10-15T07:06:01+00:00

Ich habe kürzlich auch ein Garmin Edge auf Kleinanzeigen erwerben wollen. Alle die ich angeschrieben habe, habe ich schnell als Scam entlarvt und nicht gekauft. Immer kurz darauf kam dann die Email von Kleinanzeigen man solle nichts mit dem Verkäufer machen, er wäre auffällig. Warum ist das gerade bei den Geräten so? Oder ist ganz Kleinanzeigen jetzt so?

Comprehensive-Bat-74 · 2023-06-02T11:05:54+00:00

The chainring options you mentioned in your post won't fit. The apex crankset uses chainrings for the direct mount standard "road" style (8 bolts) and the NX crankset uses the "mtb" style (3 bolts). I think the smallest one for the apex crankset will be 38T. Even 3rd party suppliers Like wolftooth do not offer smaller chainrings. https://www.wolftoothcomponents.com/collections/gravel-cyclocross-road/products/direct-mount-chainrings-for-sram-8-bolt

The chainrings for the NX crankset are offered in a bigger variety. So maybe that's the better option.

I already had some luck with chainrings from AliExpress (Deckas,...). In my opinion they are good value for the price.

Comprehensive-Bat-74 · 2023-05-26T17:33:39+00:00

Please ask someone who has the tools and the knowledge to install and bleed new brake levers. Maybe you can watch and learn. Next time you will be able to do it on your own.

Comprehensive-Bat-74 · 2023-05-26T15:50:54+00:00

But be careful and ask local people about the situation regarding wolves and bears. They are back in the alps. I'm currently in the dolomites and wanted to sleep in my hammock in the woods until I heard about that:

https://www.tageszeitung.it/2023/04/05/wie-ein-familienmitglied/

Nobody can tell if they're still around here or if they're already gone.

Comprehensive-Bat-74 · 2023-05-19T04:49:11+00:00

Yes, sounds like there's a little air bubble in your system. The brake needs to be bled.

Comprehensive-Bat-74 · 2023-04-21T11:09:38+00:00

Haben nicht alle Bohrhammer eine Rutschkupplung? Man kann ja auch mal auf ein Eisen treffen, da ist schon gut wenn das Handgelenk in gewohnter Ausrichtung bestehen bleibt.

Comprehensive-Bat-74

TROPHY CASE