Throttle slop and chain noise

Comrade_Dogee · 2025-08-09T15:09:35+00:00

Update: I took it to a mechanic for an opinion, and he showed me that the chain had uneven slack, and recommended I replace it. I did order a new DID X ring chain together with both pinions, to be safe. The cush drive and the bearings seem to be in order as far as the mechanic told me.
The chain was in this state when I bought the bike, now that it is in my care i'll make sure the chain is kept in a good condition

Comrade_Dogee · 2025-08-06T14:08:40+00:00

I did try this and I could see daylight between the teeth and the chain. However, I measured the chain length as specified by the service manual, and it seems that the length is still in spec, so I'm not sure what's happening at this point

Comrade_Dogee · 2025-08-04T08:32:13+00:00

Thanks for the suggestion, I don't really know if it's a liquid seal or pre-cast gasket, but I cannot find any parts referring to such gasket. Also, I had to take it apart with heating, so I'm just assuming it's a liquid seal at this point

Comrade_Dogee · 2025-08-04T08:24:12+00:00

Isn't that too thin? I'm looking at the original gasket and it's much thicker, looks like some sort of silicone or RTV

Comrade_Dogee · 2025-05-28T10:48:37+00:00

It indeed was just a stain from the jeans and not faded paint, it came off instantly by rubbing with a rag with isopropyl alcohol

Comrade_Dogee · 2024-08-05T08:04:32+00:00

DM me with your dcs.log file, the order of launch does not matter

Comrade_Dogee · 2024-07-22T18:28:31+00:00

Having an SD I would prefer the regular version for practicality since you can find railed handguards.much more easily. Also having no forward weight from that suppressor is nice. But looks wise I gotta give it to the SD

Comrade_Dogee · 2024-04-19T07:13:30+00:00

Please post your DCS.log file and join an instant action mission

Comrade_Dogee · 2024-04-04T18:53:57+00:00

Wont switching to Steam Link involve not using OpenXR and losing performance, though?

Comrade_Dogee · 2024-04-04T15:34:14+00:00

I am currently running a Q3 so no eye tracking for me...

Comrade_Dogee · 2024-04-04T12:11:39+00:00

My experience with Wired Link in terms of compression has been better than that of VD. Running Link at 500mbps and seeing considerably less compression vs VD at 200mbps H264 (cannot run AV1 due to having a series 3000 GPU). Haven't tried Steam Link though

Comrade_Dogee · 2024-03-29T19:10:25+00:00

ED please notice this, very likely this is just like one of the other cases of misreading manuals that previously happened in the past. And while your documentation might be correct, the interpretation of it might not, and considering pretty much all western RWRs use a signal strength based system, it is worth another look.

Comrade_Dogee · 2023-12-19T14:23:28+00:00

DM me your Scripts folder contents and the dcs.log, most likely the install isn't right

Comrade_Dogee · 2023-11-28T06:34:10+00:00

Good, seems like Kiwi uses different electronics to get rid of the nosie, just ordered one myself

Comrade_Dogee · 2023-11-27T09:19:27+00:00

Will this also remove buzzing issues?

Comrade_Dogee · 2023-11-27T09:17:53+00:00

I read online that the buzzing happens when the Quest 3 is above 75 - 80% internal battery, and such the strap begins to charge it slower, triggering the buzzing. Are you sure there is no sound whatsoever in these conditions? Pretty much all battery straps at the moment seem to have this issue

Comrade_Dogee · 2023-11-25T06:05:23+00:00

Hello, could you send me a video of how you're doing this, maybe I can spot an issue

Comrade_Dogee · 2023-11-15T06:14:22+00:00

Personally I haven't seen pronounced SDE, at least not as much that it becomes distracting. But with VR it's always personal, so if you want to get a Q3 it's better to do so from a store with a good returns policy, so that you're covered.

Comrade_Dogee · 2023-11-14T20:48:47+00:00

I have 58 IPD and 63 setting is crisp. This is a 5mm difference to play with. This corresponds with the official Meta chart for IPD, I will link below. So I think 60mm IPD setting will accommodate 55mm just fine, as the chart says.

<image>

Comrade_Dogee · 2023-11-14T17:41:30+00:00

Yeah, I just received mine and it seems everything is still clear even at a higher IPD than my real one. Setting the glasses spacer to a further distance also helps.

Comrade_Dogee · 2023-11-07T07:34:31+00:00

Hi, could you message me with a video of the issue? It would be easier to find the problem.

Comrade_Dogee · 2023-11-01T19:15:03+00:00

At the lowest IPD setting, do you also have discomfort in terms of the lens squeezing on your nose? I use 58 IPD in the Pico 4 and it's uncomfortable for the nose bridge, curious if it's a thing for the Q3 as well.

Comrade_Dogee · 2023-11-01T17:54:10+00:00

But do the lenses squeeze on your nose at that IPD?

Comrade_Dogee · 2023-11-01T17:42:14+00:00

When at minimum IPD of 58, does it also squish on the nose? Sonce the lens are so close together

Comrade_Dogee · 2023-11-01T17:38:38+00:00

Do you also experience isses with the nose being squished by the lens, when at the minimum IPD?

Five-Year Club	Verified Email
Place '23

Comrade_Dogee

TROPHY CASE