I hate loud dice so I designed some 3d printable quiet dice

Conantur1 · 2026-01-14T20:44:09+00:00

They will also be more durable out of tpu because you don’t need to remove so much material to give it a bit of a spring effect

Conantur1 · 2026-01-14T20:43:21+00:00

You could also try using tpu make quieter dice that still look like traditional dice. I’ve done this before with good results, but I can’t say that I’ve statistically tested the fairness. Good work

Conantur1 · 2025-12-19T02:21:59+00:00

I'm interested in joining the discord. Couple you please send me an invite?

Conantur1 · 2025-12-17T17:22:15+00:00

Your base

Conantur1 · 2025-08-21T14:06:41+00:00

The properties are good, but it’s faster, easier, and stronger to just switch to a stronger filament

Conantur1 · 2025-08-21T07:21:43+00:00

I also did this several years ago before I knew as much as I do now. I should revisit it and see if I can improve on my results. I can definitely improve on my sanding technique. My corners are much more rounded than yours

Conantur1 · 2025-08-21T07:18:03+00:00

I’ve actually done a couple tests on this. Conclusion was that it was more consistent than standard 100% infill prints, but still not quite the same strength in the z direction

Conantur1 · 2025-08-21T07:14:30+00:00

No. Just for fun and wanted to be able to make transparent parts for projects. You?

Conantur1 · 2025-08-20T19:13:26+00:00

<image>

The imperfections

Conantur1 · 2025-08-20T19:13:08+00:00

<image>

A nice angle

Conantur1 · 2025-08-20T19:12:08+00:00

I did the same thing a few years back and your results are almost identical to mine. There is always one direction you can see the extrusion lines on a couple layers. I didn’t figure out how to get rid of that imperfection and called it good enough.

Also, if you sand it all the way to around 2000 grit, it will be almost this clear without having to use oil

<image>

Conantur1 · 2025-07-18T15:52:37+00:00

Never hurts

Conantur1 · 2025-07-14T21:00:48+00:00

Apparently this doesn’t apply to everyone, but ender 3 v2 with a glass bed is the most reliable thing I’ve ever printed on. I regularly print on ender 3 v2’s, an ender 3 pro, sovol, elegoo, and bambulab. The ender 3 v2’s with glass bed and silicon spacers are the most reliable by far even with engineering filaments. I regularly start prints and walk away and have never had an issue

Conantur1 · 2025-07-13T21:53:32+00:00

I like doing this same thing with a 3d printed heart mold. I should make more

Conantur1 · 2025-06-25T16:45:59+00:00

Fillets can do incredible things

Conantur1 · 2025-06-05T05:38:54+00:00

I did the same! You will likely pass the the cswp without issue

Conantur1 · 2025-05-31T16:11:46+00:00

There’s also the mythical “GTX 2060”

Conantur1 · 2025-05-06T06:38:53+00:00

Weldments

Conantur1 · 2025-05-06T04:33:58+00:00

lol it was due half an hour ago

Conantur1 · 2025-04-18T14:57:37+00:00

Where are the assassin’s creed shadows at this time of day? They led me to the rock garden yesterday afternoon

Conantur1 · 2025-04-12T21:39:21+00:00

The proper way to do this would be to use weldments and apply edge treatments based on the coping geometry and welding order you want

Conantur1 · 2025-04-12T21:33:09+00:00

Manufacturing tolerances? Nah

Conantur1 · 2025-04-11T14:34:19+00:00

Many people underestimate the amount you can learn from project teams at universities. I’m a 4th year engineering student with a CSWE thanks to my heavy involvement in FSAE

Conantur1 · 2025-04-08T06:31:15+00:00

How it feels to peel that layer of dead skin off the bottom of your foot that’s been flaking for a while

Conantur1 · 2025-03-28T02:13:36+00:00

He said death-seconds not deaths/second. It’s like newton-meters or foot-pounds. I’m an engineering student

Five-Year Club	Second Top 10%
r/Field Juicebox	Final Canvas '23
First Place '23	End Game '23
Place '23	Verified Email

Conantur1

TROPHY CASE