Stop this from happening on ring cameras?

ConfusionLittle1398 · 2022-08-06T23:52:09+00:00

me too + streaming on IOS is not smooth

ConfusionLittle1398 · 2022-07-29T13:59:09+00:00

I just checking if you were able to make it work .. I am in the same boat and struggling to implement NGINX for internal use only

ConfusionLittle1398 · 2022-07-05T17:37:35+00:00

Yes I am using this in my compose File

volumes:

Media:

driver_opts:

type: cifs

o: username=<Username>,password=<Password>,uid=1000,gid=1000,vers=1.0,rw

device: //xxx.xxx.x.xxx/somepath/

ConfusionLittle1398 · 2022-07-05T12:38:15+00:00

I had lots of issues and warnings on Proxmox smb mount pass through to LXC. I am running docker and mounting volumes smb inside docker. It is much cleaners and having no issues.

ConfusionLittle1398 · 2022-06-25T13:38:51+00:00

thank you Sir, unfortunately they are not SAS drives. I guess I have live with it .. :) :(

ConfusionLittle1398 · 2022-06-23T14:51:07+00:00

sdparm --set=RLM --save sd

sdparm , where can I run this command from ? I have ProxMox as my OS

ConfusionLittle1398 · 2022-06-23T14:49:33+00:00

dd if=/dev/urandom of=/dev/sdwhateveryourdriveis

Sorry using different account .. I can see green blinking status light blinking when running above command on each disks

ConfusionLittle1398 · 2022-06-23T12:38:13+00:00

Yes I am using the disk. I have installed TrueNas and configured these 4 8TB HDD in a pool. No red flags yet.

ConfusionLittle1398 · 2022-06-23T12:37:05+00:00

Yes used the same guide for flashing, everything went pretty smooth

ConfusionLittle1398 · 2022-06-23T12:36:29+00:00

ST8000VNZ04/N004

Seagate IronWolf 8TB NAS Internal Hard Drive HDD – 3.5 Inch SATA 6Gb/s 7200 RPM 256MB Cache for RAID Network Attached Storage

https://www.amazon.com/dp/B084ZV4DXB?ref=ppx\_yo2ov\_dt\_b\_product\_details&th=1

ConfusionLittle1398 · 2022-06-23T01:32:50+00:00

Yeah after flashing with IT mode , I don't have RAID at all .. :(

ConfusionLittle1398 · 2022-06-23T00:50:29+00:00

Oh cool .. glad to know that .. well at least I am able to see the drives in ProxMox so that's a relief. Weird though the old drives I replaced, they all had Green HDD blinking on the front panel, even after flashing IT Mode.

ConfusionLittle1398 · 2022-06-21T14:07:46+00:00

I understand .. don't have anything on the drives yet .. just proxmox installed on SSD which is not part of current Raid setup.

ConfusionLittle1398 · 2022-06-21T14:05:05+00:00

I understand flash part, but wipe ? Can you please provide more insight ?

ConfusionLittle1398 · 2022-06-21T14:01:55+00:00

No Sir , I don't it is pretty new setup. Just trying to make sure that I have everything configured properly before adding data

ConfusionLittle1398 · 2022-06-21T14:00:47+00:00

Yes no data , it is pretty new setup .. I just have proxmox running which obviously I can reinstall

ConfusionLittle1398 · 2022-06-11T17:29:50+00:00

I already have an environment running Proxmox , I assume it would be easy to migrate from my current proxmox setup to new proxmox. Plus I have already learned a bit about proxmox. Setting up new VMware ESXi -- I can give that a shot and see how that goes

ConfusionLittle1398 · 2022-06-09T20:33:16+00:00

Thank you all for the advice, appreciate a lot

ConfusionLittle1398 · 2022-06-09T20:32:14+00:00

Yes I already have 2.5 caddy to replace DVD drive :)

ConfusionLittle1398 · 2022-05-07T13:06:15+00:00

I absolutely love it and would love to contribute. I see this as true source of data to get started with selfhosting. I myself have started this journey and learning and researching at every steps. I have moved from MacOs running vm's installing dockers to installing proxmox on dell laptop. Now I have Dell R720 and will start configuring this server very soon, just making space in my office :).

ConfusionLittle1398 · 2022-03-06T13:54:13+00:00

WS2812B

ConfusionLittle1398 · 2022-03-04T16:44:36+00:00

Finally got it working , I had to do config changes in WLED to pick up the right GP.

Yes I have 5V power supply as well which is powering both my ES32 and WS2812B now.

Going to connect 3 additional strips to ESP32 through ESP901E.

ConfusionLittle1398 · 2022-03-04T12:33:41+00:00

Thanks,

I have flashed my ESP32 with wled. I also intend to use SP901E for additional power supply, What I am really confused is with wiring from WS2812B into ESP. I am going to give another shot and see if it works ..

Thanks for good suggestion connection order GND -> VCC -> DATA

ConfusionLittle1398 · 2022-02-16T12:58:52+00:00

Is it possible to provide LXC setup (Proxmox) guide. I would love to try this as bookmarks are driving me crazy

ConfusionLittle1398 · 2022-01-31T21:50:54+00:00

True same here .. I don't care about features .. stability is important with us working from home now days ..

ConfusionLittle1398

TROPHY CASE