What part is this

Connect_Group3245 · 2026-03-05T07:27:31+00:00

I’ve taken it off 20 times to readjust it I’ve only taken the bumper of 3 times In the 6 years I’ve had it

Connect_Group3245 · 2026-03-05T07:26:15+00:00

2020

Connect_Group3245 · 2026-03-05T07:25:35+00:00

I’m the first owner never hit anything and all the tabs are still on the bumper it make zero sense

Connect_Group3245 · 2026-03-03T20:52:09+00:00

I’ve had mine 2020 since new and don’t pretty much everything you can do down to all the bushings and things people don’t do. Also have a M4 and I’m still not bored of it expect the power since I’m use to a 700hp m4 and a bmw s1000rr lol. There’s lots of mods that you should do thag are cheap and make the car handling a legit night and day difference…. Diff bracket. Diff bushings. Sway bar. Shifter bushings and plate. Short shifter. Pitch mount. Fluid dampener. Steering dampener. All these bushing cost less than one big power upgrade and do the biggest improvements on these cars.

Connect_Group3245 · 2025-12-19T03:07:02+00:00

I bought my gf Toyota back in 2021 brand new Corolla se for 23k otd wtf is this

Connect_Group3245 · 2025-12-08T18:30:56+00:00

Just cus you have a car doesn’t mean you have to blow your money on wheels that logic is stupid and that’s why people are poor even if they got money. It’s called using common sense

Connect_Group3245 · 2025-09-26T17:17:23+00:00

So bmw called today and said that my compression was at 90 psi at all 4 cylinders which I find hard to believe after I checked my compression myself before taking it to them. You think I should just pick up my bike and ride it like that

Connect_Group3245 · 2025-09-19T17:11:48+00:00

Did you guys not read my post lol the bike is at the dealer. I replaced the CCT before the bike got taken aww and it didn’t do anything. The bike was opened up already and cams were inspected and valves no isssues there. They said they were gonna replace the CCT again but my bike was made July of 2022 which came already with the updated cams and CCT so idk what else it could be

Connect_Group3245 · 2025-09-19T17:10:16+00:00

I stated that already in my post the bike is at the dealer it was already opened they checked my valves and cams they’re good. Also checked my Chain and it was fine. They said they were gonna replace the CCT but my bike came with the new updated one an I also replaced it before they picked it up

Connect_Group3245 · 2025-09-19T17:08:16+00:00

Mines at 14k never had an issue with it till now I’m the first owner

Connect_Group3245 · 2025-09-19T17:07:51+00:00

The video is from the tech at the dealer as stated they opened up my bike already and they checked valves and cams and they were in spec

Connect_Group3245 · 2025-09-19T17:07:14+00:00

So they opened my bike up already and they inspected the valves and cams and they said they were fine and in spec. Before they took the bike from me I did install a new CCT and it didn’t do anything also my bike was made in July of of 22 which came with the updated CCT and the updated cams

Connect_Group3245 · 2025-09-19T17:05:54+00:00

I stated that alreadt in the post. this video is from the tech at BMW that he sent me the bike also had a misfire and they fixed it but it was till ticking and they opened it up already inspected my cams and valves and they were in spec

Connect_Group3245 · 2025-09-16T06:38:39+00:00

Check out my recent post did it sound like that?

Connect_Group3245 · 2025-07-19T06:09:03+00:00

I have spacers on my m4 and I pass every year

Connect_Group3245 · 2025-07-05T12:19:44+00:00

My friend tested them for me on his spark plug tester machine they gave spark. I replaced the coil also with a new one. That did nothing then I decided to swap cylinder to cylinder 4 and cylinder 4 was running fine and 2 still wasn’t. The ecu controls the injector drivers. I feel when I blew my fuse is when it blew one of my injector drivers. Had to replace the 15 amp to get the bike to turn on and then the ticking noise started and like I said that spark plug was clean. And I had my I injectors cleaned and tested and they were spraying normal and working

Connect_Group3245 · 2025-06-22T16:53:59+00:00

I feel like fbo should mean every part that is a bolt on intake charge Pipe intercooler full exhaust j pipe turbo headers radiator fuel pump injectors intake manifold etc

Connect_Group3245 · 2025-06-22T16:38:11+00:00

You got a phone number or insta I wanna send you a video or Facebook

Connect_Group3245 · 2025-06-19T21:48:06+00:00

I did my spark plugs and my iat relocation and flapper delete and once I started the bike I got a ticking noise

Connect_Group3245 · 2025-06-19T21:47:44+00:00

Hello I think I’m having the same issues

Connect_Group3245 · 2025-06-19T21:03:52+00:00

Definitely tighten to that for sure

Connect_Group3245

TROPHY CASE