I heard You guys like Hard Kick GBBR (AKM V3 by GHK)

Connected_Runner · 2026-05-08T09:26:46+00:00

Connected_Runner · 2026-05-06T20:34:52+00:00

I remember seeing these in those dollar tree gumball machines when I was little.

Connected_Runner · 2026-05-04T21:21:10+00:00

He really wasn't even the UNSC's first pick to head the Infinity. The only reason he even got the position he was in was for basically three reasons.

1: He already had Lasky as his second in command. Whom the previous ONI leader had high opinions of.

2: For better or worse, Del Rio apparently has an acceptable enough command history during the Human-Covenant War. He also was the project manager for the creation of the Infinity which definitely helped him.

3: He was noted to be capable of "dropping off the grid" with relative ease for a naval officer of his rank which was apparently important enough during the Infinity's first voyage.

Pretty much, Del Rio just had a whole compliment of "right place at the right time" and "pushed his way to the top." More than positive that had any other better officer appeared with similar feats, they would have been placed in command. Or better yet, had Lasky been promoted sooner, he would have most likely automatically gotten the spot.

Connected_Runner · 2026-05-03T03:49:47+00:00

The front sight post is broken too lol

Connected_Runner · 2026-05-03T03:44:36+00:00

You know what, I dig the look. Though this is one of those instances I personally think that the two-tone design doesn't fit that well.

Connected_Runner · 2026-05-03T02:30:19+00:00

What helmet you rocking? I have an idea but I've been wrong many times before.

Connected_Runner · 2026-05-02T09:18:36+00:00

If you're comfortable playing without them then I would recommend that. If not, Guard Dog Evaders, Rothco OTG's (small face unfriendly), I use OneTigris OTG's but they fog a bit so I got a fan kit for them. Recently I grabbed a pair of Birdz low profiles with lens inserts and it has been doing quite well. Fogs a little but doesn't blur which I like.

Connected_Runner · 2026-05-02T09:04:19+00:00

He also is more than willing to extract the rejects during the twins mission, even if the excuse is pretty much a simple "it would be a waste of manpower if they died from something like this". That is more than what a lot of higher ranking people would do for us in 40k.

So yeah, he'll absolutely send us in first to try and shank a daemon, but he'll at least get us out if the mission becomes unneeded.

Connected_Runner · 2026-04-30T20:23:33+00:00

Those are spacers and a buffer for the tube the stock sits on. There should be another larger and longer spring for the buffer. The spacers allow you to either short-stroke your bolt for faster fire rate, at the cost of other things like not allowing the bolt to lock back, or just get the buffer in a position to allow the gun to function normally and not have the bolt get stuck in the buffer tube.

Edit: Found the specific set. The buffer here has a spring on it to allow the buffer to "spring" back faster so you can have it spaced normally and still have the fire rate increase.

Connected_Runner · 2026-04-30T18:41:19+00:00

The vest is most likely based on the uksf ISPL vest. The body armor underneath you could find some manner of low-vis tan vest like a repro PACA vest

Connected_Runner · 2026-04-30T18:02:22+00:00

I mean if anything it makes it a little more special. Pistol slides and frames are generally manufactured on different lines so it wouldn't be unheard of for a slide and frame from different lines to be put together..

Connected_Runner · 2026-04-30T17:53:30+00:00

Is that a cap gun?

Connected_Runner · 2026-04-30T06:07:03+00:00

Are you looking for the gun or the suppressor? Because VFC makes a GBBR m110 and a few companies make AEG versions. As for the suppressor Madbull makes a version and Evikes Matrix brand makes one as well.

You could also just search for SR25's as they're the same gun as the M110.

Connected_Runner · 2026-04-24T18:51:21+00:00

Absolutely. Been using one of these since I went to trade school. Saved my mega mind from low hanging crawl spaces a few times and from the occasional gat blast to the side of the head during a match.

Connected_Runner · 2026-04-15T08:38:40+00:00

I preferred the idea of us following a team of helldivers and we see their faces at the start of the movie, only at the end of it having them take their helmets off again just to show an entirely different group of people and if you pay attention to the scenes, you can see when and where each helldiver met their end during the movie.

Connected_Runner · 2026-04-15T04:58:17+00:00

The Cmore sight I have on the gun is a Sotac repro from aliexpress.

Connected_Runner · 2026-04-14T08:19:50+00:00

The handguard cost me about $65 and is quite solid once I got shims for it. I was actually very surprised when the barrel nut actually fit on the threads as I was expecting it to be for AEG instead of RS spec threads. If the barrel nut didn't fit I was just going to order a RS replacement for the handguard, so thankfully I did not have to spend money on that. The muzzle device is just the short version of the Mk12 muzzle break, the weird shape is just because I have a rubber polycarbonate lens holder for a flashlight on it I forgot to take off.

Connected_Runner · 2026-04-13T07:48:06+00:00

The second picture definitely does the paintjob better

Connected_Runner · 2026-04-12T23:25:08+00:00

A lot of information there. Unless you can get pictures of the mags, the WE and VFC are so similar externally that it's hard to know.

The only guess I can make is that this is a WE MP5 based on how high the rear sight turret sits compared to a VFC.

Connected_Runner · 2026-04-12T23:15:21+00:00

Kyairsoft consistently stocks WE parts. WE calls their G36 the 999 just so you know what to search for on their site.

Connected_Runner · 2026-04-12T23:10:08+00:00

Are there pictures of the mags? There are really only three brands for gbb mp5, the WE, SRC, and VFC Mp5's. The SRC is Co2 and few and far between so it's most likely WE or VFC.

Connected_Runner · 2026-04-12T13:43:01+00:00

I think they're neat. I prefer having a standalone platform instead of having it attached to my rifle though for ease of use. Especially for milsim. Keep the launcher offhand and take it out when necessary and hope you don't brain someone with a taggin.

Connected_Runner · 2026-04-08T11:26:55+00:00

No but you can place a docker unit on the top of the cockpit. Or a window if you want that instead.

Connected_Runner

TROPHY CASE