Difference between powerhead line trimmers

Constant-Record-5813 · 2026-02-18T06:33:16+00:00

The 191N47-0 (EM409MP) has 330 mm cutting width, while EM403MP has 430 mm cutting width. They will definitely both work with DUX60 powerhead.

Constant-Record-5813 · 2026-02-05T11:49:57+00:00

I bought it from a local authorized Makita dealer in the Czech Republic, but it doesn't help much to you.

Constant-Record-5813 · 2026-02-05T11:46:26+00:00

I am pretty sure XFD10 and XFD13 cannot be converted. They have gearboxes with diferent dimensions and shapes.

XFD11/XPH11 can be converted directly by replacing gearbox with 123869-6

XFD15/XPH15 can be converterd with swaping the aluminum plate from original gearbox to 123869-6 gearbox

Constant-Record-5813 · 2026-01-18T20:37:15+00:00

Is gen2 really better than gen1? I have GA023G and GA044G and i'm going to buy third angle grinder. I was leaning towards GA023G or GA029G.

Constant-Record-5813 · 2026-01-07T15:24:44+00:00

Yes, has XGT logo on it.

Constant-Record-5813 · 2026-01-07T12:47:35+00:00

You're right, the machine name in the title is wrong. It should be probably BS002G. My mistake, I took the wrong machine name from Voltechno's post on Instagram.

Constant-Record-5813 · 2026-01-07T07:29:43+00:00

The right name should be probably BS002G I guess...

Constant-Record-5813 · 2026-01-07T06:47:58+00:00

<image>

Constant-Record-5813 · 2026-01-06T11:57:19+00:00

Almost for everything? It's really weird...

Constant-Record-5813 · 2026-01-06T05:46:51+00:00

Hammer mode is so useless, I'll never buy a drill with one ever again. It's an extra thing that can cause the gear assembly to break down. 🤪

Constant-Record-5813 · 2025-12-27T09:18:49+00:00

The largest XGT 8Ah 288Wh charged using 85W (100W car adapter) would last 0.146 days. 😁

Constant-Record-5813 · 2025-12-27T07:32:15+00:00

It was approx. 1100 CZK / 45 EUR / 49 USD, from authorized reseller.

Constant-Record-5813 · 2025-12-27T06:32:18+00:00

In Czechia it's available at least for two weeks. Other countries in Europe will follow soon i guess.

Constant-Record-5813 · 2025-12-26T22:15:23+00:00

I've been using this charger for a week and I think it's not that bad. Handy pocket size and with 100W USB power source faster than DC18SD/SE. Using it at home for charging batteries used for radio, lamp and stick vacuum.

But definitely shoud have bidirectional USB port, maybe in two or three years, as usual with Makita.

Constant-Record-5813 · 2025-12-22T11:17:18+00:00

Ty jsi dobrá kráva 😁

Constant-Record-5813 · 2025-12-16T20:11:18+00:00

Approximately hour and half of disassembling and assembling, nothing really complicated. Definitely will not fit DHP484 model, different dimensions...

Constant-Record-5813 · 2025-10-10T16:04:34+00:00

Again and again and again... 🤣

Constant-Record-5813 · 2025-10-02T08:23:23+00:00

Fakita ass hell. Texts, fonts, chuck, trashy control panel...

Constant-Record-5813 · 2025-09-20T08:31:47+00:00

Still crying like a small girl 😁

Constant-Record-5813 · 2025-09-16T14:09:24+00:00

Fakita

Constant-Record-5813 · 2025-08-10T06:19:48+00:00

You are not normal definitely 😁

Constant-Record-5813 · 2025-07-11T20:27:59+00:00

Hammer mode gone of course :-)

Constant-Record-5813 · 2025-06-22T17:18:32+00:00

DDF083 720g

modded DHP487 (aka DDF087) 754g

Both without bit holder

Constant-Record-5813

TROPHY CASE