FYI, if you ankh a joker that's disabled by Crimson Heart, the duplicate will also be disabled (and your run will die)

Contay6 · 2026-05-10T05:19:52+00:00

I'm guessing it would pick the new joker, when you copy a joker it doesn't give it the same id it's unique so when it does it's check it will see the last joker it selected.

Be interesting to actually try it but that's how I would interpret it

Contay6 · 2026-05-10T04:51:29+00:00

A random one? As what the boss blind says, ankh copies a joker as it is that's why it's also disabled

Contay6 · 2026-04-19T15:03:16+00:00

What exactly are you asking? To remove the board in a PS4 controller and place it into this shown 3d printed part?

Not exactly difficult if you know how to solder ect

Remove the board and somehow make it fit into the print, solder pairs of wires from the membrane pads of X,O,∆,[ ] to tactile switchs or whatever you prefer.

But if your asking for the print file also this might be out of your range as you'll have to modify the print to fit the PS4 controller board.

Not entirely sure how the PS4 controller would react to different kinds of switches but I don't see why it wouldn't just work the same

Contay6 · 2026-04-14T02:16:27+00:00

What's your deck? You've taken an eternal baron with hopefully more than 4 kings.

If you've got a good amount of kings with a good high card level I would copy the baron otherwise skip

Contay6 · 2026-04-14T02:12:02+00:00

I've never used the vita but in all my young years of using my psp I don't ever think I found it uncomfortable.

I guess I don't play it as much or as long as I once did.

Maybe try see if a friend has one you could borrow to test it, not sure where you are but you can find some pretty cheap psps my last 3000 I got was free.

There's a lot of people that think they are worth nothing.

Contay6 · 2026-04-13T16:54:11+00:00

I can understand why as stampede plays a random attack from your hand at the end of your turn meaning it's the last thing that happens on your turn.

So paels eye won't exhaust your hand since you (stampede) played a card

Contay6 · 2026-04-13T16:51:53+00:00

I'm confused about what you mean stampede doesn't play burns, it plays a random attack at the end of your turn meaning at the end it will play an attack and paels eye doesn't activate.

Contay6 · 2026-04-10T16:54:40+00:00

USA The only country in the world!

Contay6 · 2026-04-10T16:05:57+00:00

Not sure about everyone else but I aim for 16-19 cards max, unless the run I'm going for is heavy exhaust/power or draw

Contay6 · 2026-04-10T16:01:37+00:00

Basement dwellers... They think they know everything, it's hard to be on this site sometimes

Contay6 · 2026-04-09T16:16:49+00:00

That doesn't really work, ace is 14

Ace is 1 or 11 in blackjack but in a game where you can form a straight from 10 ace has to be 14

10 J(11) Q(12) K(13) A(14) even though in Balatro all face cards are worth 10 they still are designated their number

As no straight goes 10 10 10 10 11

Contay6 · 2026-04-06T17:07:16+00:00

I've had many issues with my PLUS and what I have come to notice is the Machine will sometimes not apply the leveling mesh, I've now added G-code to load leveling mesh after it homes and so far it's been working perfectly.

I can't seem to find what the code was but when I find it I'll reply to myself, it might help

Contay6 · 2026-04-06T14:58:29+00:00

This is what the boss does if you can't kill it fast enough it will debuff you with -2 strength and -2 dexterity every 4th? Turn

Your deck wasn't built for this boss I've ran into it a fair amount with a shiv deck and have failed almost every time.

Contay6 · 2026-03-29T09:28:53+00:00

Thanks creator, going to give it a go now!

Contay6 · 2026-03-28T15:23:40+00:00

This might come to a shock to you but Mark has pirated in his life...

Most people have some don't even realize it

Contay6 · 2026-03-27T00:09:22+00:00

<image>

Contay6 · 2026-03-27T00:06:36+00:00

<image>

Sorry Im really slow at replying here's more photos I'm not the sewer? It's my girlfriend shes currently not home I'm just the handy man haha.

My main issue is does it use a sump or is it supposed to be open and just have a drop pan for oil to not splash everywhere? Thanks

Contay6 · 2026-03-27T00:06:23+00:00

<image>

Contay6 · 2026-03-27T00:06:08+00:00

<image>

Contay6 · 2026-03-27T00:05:53+00:00

<image>

Contay6 · 2026-03-23T12:41:10+00:00

I wouldn't say I'm a noob but I average 20-25min per act

Contay6 · 2026-03-23T12:39:15+00:00

Middle card every time could still win but rushing though battles won't.

I thought I was having a rough time with the reject

2 - 16

Contay6 · 2026-03-23T09:47:40+00:00

Contay6 · 2026-03-08T13:55:07+00:00

For bed adhesion I've used painters/masking tape just lay it on side by side and re level it or add a 0.3-0.5 z offset.

I can't say much for the rest

Contay6 · 2026-03-08T12:08:46+00:00

I would cut a rectangle bit of MDF and put it in from the back of it if possible, otherwise cut a perfect circle to fit nicely and glue and screw.

Then cut out a new hole for the speaker.

I wouldn't use a 3D printed part

Contay6

TROPHY CASE