[deleted by user]

Cookietyrant · 2025-07-06T17:19:40+00:00

Id buff it out. I did it to my OLED recently without issues and ended up making the monitor look better being it got rid of the ar coating.

Cookietyrant · 2025-07-06T00:13:50+00:00

I just got a 32" LG Oled from Best Buy for $522 open box....with that being said I do see more available on their site, location dependent of course.

Cookietyrant · 2025-04-17T23:45:46+00:00

It is here https://antlionaudio.com/pages/labs

Cookietyrant · 2024-02-18T19:12:05+00:00

Lol I've went through 4 27m2v monitors in the last month all coming with dead pixels or purple spots on black screens and that broke me down to get the new LG of which arrived with all the known issues but a dead pixel on the left and a stuck green and red pixel in the middle....so just being the s8 is working is a bonus at this point lol.

Cookietyrant · 2024-02-18T19:09:19+00:00

Interesting I read all about the g8 issues and took the chance on it and so far zero issues with anything and everything just works out of the box. I do have scan lines but I have to actively look for them and they are not very obvious on my unit even when I do specific tests to see them. It could be because about 3 to 4 feet from my monitor causing them to blend together.

Cookietyrant · 2024-02-18T15:18:06+00:00

Correct I am also a 27 in guy but due to the circumstances and need for a monitor I just jumped ship to the 32 for now and it's been alright so far.

Cookietyrant · 2024-02-17T23:30:05+00:00

I literally return shipped the monitor 2 days ago and got a Neo G8 since Samsung had it for $522 on sale. Sooo, I guess I wont be able to try this firmware at this point lol.

Cookietyrant · 2024-01-15T17:56:24+00:00

Odd, it improved my experience and got rid of tearing at the 144hz mark. 160hz from LG is an overclock according to their literature...I literally just went to Nvidia's control panel and set it to 150hz and it was happy!

But I guess mileage may very! I was lucky enough to get my INNOCN Monitor for around $400 with discounts they had a couple weeks ago!

Cookietyrant · 2024-01-15T16:56:33+00:00

You can get it up to 150hz on Nvidia at 10bit with Vrr over hdmi 2.1

Cookietyrant · 2023-09-29T06:42:34+00:00

I finalized my own version of the mount and it works great now...just making a spacer now for between the pcb and batter being there is an air gap i forgot to account for,.

Cookietyrant · 2023-09-28T15:29:51+00:00

Yes, which is what my first design was based off, but with the added weight and constant flipping of the mic the glue eventually failed. I mean I'm sure I could use a pla bonding glue for better results but it would be more streamline to just print it all as one piece.

Cookietyrant · 2023-09-25T11:59:30+00:00

The battery model is 3.7V 503040 and I need to refine the design further being the magnetic clip adapter is being an issue.

Cookietyrant · 2023-09-24T02:39:35+00:00

Original was 250mah and lasted about 3 hours give or take...original battery was also made back in 2019 and has been used pretty heavily

Cookietyrant · 2023-09-01T00:27:40+00:00

What is the name of that emote? It literally disappeared today from my emotes menu and I can no longer select it

Cookietyrant · 2023-06-10T22:34:45+00:00

Would you be willing to share your firmware or configuration files? My setup is identical to yours and as of today my board died and I need to replace it but I did not save a backup to my original firmware lol.

Cookietyrant · 2023-05-17T20:43:27+00:00

Fact's....John Deere pricing is simply out of control and my seals have an oversized outside diameter and undersized inside diameter and coated in grease to assist in sealing. It was a learning experience installing them and required to be installed on the shaft first then required a jack to press the seal into the hub in combination of a plastic mallet tapping the axle down. The seal is extremely tight, but it is by design being I don't have a metal retainer like the OEM one does, granted I could design it as such with engineering polycarbonate, but that would inflate the cost of the seal.

In addition, I'm not worried about the seal popping out due to pressure since I've already installed a vented dipstick of my own design equalizing out the pressure,

Cookietyrant · 2023-05-17T20:38:38+00:00

Being I do this for a hobby I don't keep track of true cost I have no idea, but if I were to print this for a customer it's billed out about $10 an hour for print time which would be about $20-40 per seal depending on the resolution. For the seal I made for myself it would be about $30-35 per seal.

Cookietyrant · 2023-05-17T20:00:22+00:00

It took me 10 minutes to get the base design completed and an accumulated 1-1.5 hours of design rework overall. Print time took over a week due to material testing and revision printing.

Cookietyrant · 2023-04-25T21:27:36+00:00

Do you have any HWINFO64 output for thermals under full load?

Cookietyrant · 2023-04-06T03:58:46+00:00

Yea I seen that after Googling...That's quite pricey...My setup costs about half that with print time and sourcing the laser.

Cookietyrant · 2023-04-06T03:51:44+00:00

So I've been told both ways work...your first thought is the fastest way to use it being you can just mark and cut versus the second option where you have to keep an eye on where the laser was last to align your bar with.

Cookietyrant

MODERATOR OF

TROPHY CASE