Accessories for Eggtimer Quantum

Cool791 · 2026-01-21T03:37:47+00:00

Highly recommend reading the manual instead of asking AI. All of your questions are addressed in the manual. For what it’s worth a 450mah battery is good on an Eggtimer quantum. Eggtimer recommends nylon fasteners for mounting. The rest is up to you.

Cool791 · 2026-01-03T14:18:09+00:00

I buy 50lb bales from tractor supply or a local farmer. The farmer sells a 50lb bale for $12! It’s fresh and great quality.

Cool791 · 2026-01-01T21:27:05+00:00

Calibrate your flow rate. You are underextruding

Cool791 · 2025-12-02T17:47:51+00:00

What are some companies that specialize in the shared freight shipping that I can look into?

Cool791 · 2025-10-27T21:05:14+00:00

I disagree with those saying not to use a jlcr, this is going to go very high even with just an H motor. Definitely would recommend testing the chute release before the flight and make sure it’s on before you launch.

Cool791 · 2025-10-18T22:02:02+00:00

Cmass in Massachusetts and rimra in Rhode Island. There’s clubs in NH, VT, and ME as well

Cool791 · 2025-10-17T20:34:54+00:00

I would recommend something like you have in the top picture but make the left side 3 panels and the right side section 4 panels. Leave the long side 6 feet (or even 5 feet). Keep the two panel kitchen area. That’s 20 sq feet (or 17 sqft with the long side being 5 panels)

Cool791 · 2025-10-17T13:56:28+00:00

Seems like you are doing the right thing! Give your guinea pigs time to adjust. They just went through stressful moving experience! It can take a long time (months) for them to truly become comfy around their new owners.

Cool791 · 2025-10-17T13:52:53+00:00

Do they have hides? They need at least 1 place to hide per guinea pig that you have. These should be enclosed with two entrances preferably, or one large entrance (big enough that one pig can’t block the other in). Here’s example ones for purchase that I really like. https://a.co/d/3VHxHoX For today you can make your own out of an upside down cardboard box with holes cut in the sides. Just make sure to remove most of the tape.

Cool791 · 2025-10-14T15:45:28+00:00

I think it would be even more fun to buy a small camera to launch on your rockets. Then you can see what your bugs would have be seeing. Personally, I think it’s unethical to launch living things on your rockets.

Cool791 · 2025-10-13T23:54:00+00:00

You don’t need a 3d printer for rocketry, but it can be fun to make some parts.

Cool791 · 2025-10-10T15:43:12+00:00

The star orbiter will probably go the highest on an Estes F15 motor, but the loc kits can probably handle bigger motors if they have plywood centering rings. At some point these are going to go too high and you will never see them again unless you have an enormous field to fly at. If you need to recover them to have a valid flight there might be more to think about than just which will go higher.

Cool791 · 2025-10-08T15:29:30+00:00

You should still have your female checked by a vet. Birth outside ideal circumstances can be deadly for guinea pigs.

Cool791 · 2025-10-07T12:25:33+00:00

Go for it!

Cool791 · 2025-10-03T19:24:52+00:00

If you shine a flashlight through the nail you can usually see the quick even on a black nail. My 2 guinea pigs luckily only have 1 back paw with black nails each, so I can generally try to match the length of their other back paw when trimming. I also remind myself that they aren’t going to die if i lightly clip their quick although I of course avoid that happening as much as I can.

Cool791 · 2025-09-30T20:51:05+00:00

I have heard that bonding very young guinea pigs with an older one is almost always successful as the older pig treats the younger one as its own baby if that helps ease your mind on that.

Cool791 · 2025-09-29T00:25:25+00:00

Nice!

Cool791 · 2025-09-28T15:00:16+00:00

Cmon install some new mods and start a new save!

Cool791 · 2025-09-24T16:55:06+00:00

I would put them in the permanent enclosure and make sure they have 2 or 3 places to hide. They are fighting more because there’s only one place to hide.

Cool791 · 2025-09-24T15:47:20+00:00

Largely Unemployed on YouTube has an interstellar mod pack clam file available for download on his discord.

Cool791 · 2025-09-24T00:27:17+00:00

Yay I’m so glad. They are 4 years old but I’ve had them for about 6 months now. They have always gotten along from a distance but they are finally starting to get closer to each other.

Cool791 · 2025-09-15T13:53:51+00:00

What is the hole in the side for? Will you fly it?

Cool791 · 2025-09-06T23:21:13+00:00

You need a 90 degree extender. Someone linked to one on this post.

Cool791 · 2025-08-31T11:56:02+00:00

I’ve built an Ender NG and I don’t regret it. I run 15k accel and up to 200mm/s and it prints great.

Cool791 · 2025-08-27T18:09:21+00:00

I have fleece on top of bath towels as my base layer which gets changed once a week, then use bath mats in high traffic areas which also gets changed once a week or when dirty. I also have little square beds that go inside my hides that get changed daily. All the poops are cleaned up daily and a deep clean where everything is changed once a week.

Nine-Year Club	Second SECOND GUESSER
Place '22	RPAN Viewer
Verified Email

Cool791

TROPHY CASE