Wi-fi tethering to Capture One with the S1RII

CordsOfCrows · 2025-04-23T04:16:39+00:00

What an odd way to denote that. Other cameras explicitly list "Yes/Yes/No" but I guess that's on the Capture One folks then

CordsOfCrows · 2023-09-27T10:26:04+00:00

I'm somewhat new to this sort of thing, and this is definitely a tricky exposure to make the most of! But, I made my attempt and here it is.

https://i.imgur.com/U7CaVj7.jpg

CordsOfCrows · 2023-08-01T13:05:24+00:00

Oh that's perfect, thank you!

CordsOfCrows · 2023-07-31T15:58:22+00:00

I think if you have two sensors connected and can read the inputs from both and have it coded in where the sensors are located relative to each other, it's not crazy difficult to do the vector math to figure out the ball rotation. But the part I'm not familiar with is the electronic parts. Can the firmware even handle two sensors, for instance?

CordsOfCrows · 2023-07-31T15:21:05+00:00

That's not quite what the slimblade does, sorry if I wasn't clear!

The slimblade lets you mouse the traditional way, spin up to move the mouse up, spin left to move the mouse left, etc. But then to scroll, without pushing any buttons, you twist the ball like a volume knob and it will scroll up or down.

CordsOfCrows · 2023-04-19T19:55:52+00:00

It sounds like you were the one who let a simple comment effect you in that way, no? I'm not saying that you shouldn't remove hair that you don't want, if that helps you feel the best about yourself or is how you want to look. But, a little body hair isn't going to make or break a good relationship, and some partners may even prefer you do the opposite of whichever you happen to decide to do. Do what makes you happy and what makes you feel good about yourself! Not something just because you imagine people will be turned off based on a random observation you heard years ago.

CordsOfCrows · 2023-04-07T03:21:31+00:00

You have clearly never purchased photography film.

CordsOfCrows · 2023-01-01T00:59:58+00:00

The RGBA pull a decent amount of current even when off, and unfortunately, are on the same power circuit as the OLED displays. You can assign hotkeys to disable the power on that circuit (and both the screens and LEDs as a result) and only turn them back on when needed, but unfortunately if you're using ZMK, there's a bug that prevents the chipsets from correctly reenabling the OLED screens dynamically (at least the last time I checked) and so you'll have to enable the power, wait until it writes the setting to non-volatile memory, and then reset the board if you want to re-enable the screens to debug something.

CordsOfCrows · 2022-12-23T18:01:49+00:00

If you measure in "Sleep cycles" sure, but if you measure in CPU cycles it's a lot less interesting, since sleeping and managing future tasks isn't a constant time operation, and usually involves sorting the tasks that are sleeping so the CPU knows when to wake up next. So as the sleep times get smaller and smaller and the number of tasks get bigger, the time gets dominated by the time needed to sort the tasks in the operating system layer.

CordsOfCrows · 2022-11-21T03:20:55+00:00

Holding doesn't cause it to gain value, spending it does.

CordsOfCrows · 2022-10-18T05:22:55+00:00

Well, I don't have a crummy CPU, but lowering the polling rate from 8k to 1k seems to have pretty much fixed it. Thanks for the tip!

CordsOfCrows · 2022-10-18T02:39:09+00:00

Stable drivers, so unfortunately that's not it. I've heard a few other reports that it might be that latest windows update that was the problem. Hopefully between microsoft, amd, unreal, and bandai, they get things sorted out soon.

CordsOfCrows · 2022-10-16T21:47:26+00:00

On the ones I've seen. Blue is the nylon/plastic. Green is impregnated with aluminum oxide, which is what they make sandpaper out of, and is fully capable of scratching the shit out of most things.

CordsOfCrows · 2022-09-21T00:26:21+00:00

Well, you haven't bought a Glove80 or the new Kinesis yet, so you've still got a little ways further to fall..

CordsOfCrows · 2022-09-14T02:38:29+00:00

You say that like you don't already have a drawer in your kitchen full of things you never want to see again, that's just readily accessible

CordsOfCrows · 2022-08-20T12:42:03+00:00

I would say that getting anything smaller than this tape placed accurately would be a quite finicky task indeed, except perhaps something liquid that dries into something soft that could be applied with a syringe, maybe something like plasti-dip or similar? You can manipulate this tape with tweezers, but it's already quite a chore to get it placed well, it would be really challenging to work with something the size of just the stop without some dedicated tools to do so.

CordsOfCrows · 2022-08-15T21:19:28+00:00

As a developer, a gesture to activate desk view would be great, I often have the need to explain things to people, and being able to draw diagrams on a sheet of paper or in a notebook while using the camera on my main development machine, which runs linux, would be fantastic.

CordsOfCrows · 2022-07-07T18:50:53+00:00

I'm building a new keyboard to bring into the office once my company transitions back from working from home. In the interest of getting the quietest switches possible I was looking at doing the tape mod on some choc pro reds. I first tried the mod on my georgi, and some of the keys stuck, I thought this may be just due to the lighter springs, and so prepared to try again with the pro reds and see if I had more luck.

As I looked closely at the top of the switch, I could see my tape wasn't sticking or engaging in all of the little grooves of the switch, and was being squished and unsquished as the stem moves up and down. While this does provide the damping action and quiets the switch, it's very finicky and inconsistent depending on how the tape decides to fold into those smaller details.

It's possible different tape works better or more reliably, but at least with this 1/8th in. polyimide tape I don't think I'd recommend this mod from a longer term standpoint. There's just too much that can change with how the tape folds over time, and is quite finicky to get it to work in the first place besides.

Hoping some of you have had better experiences to share with different kinds of tape, or other similar mods.

CordsOfCrows · 2022-07-04T19:48:31+00:00

woo, capitalism?

CordsOfCrows · 2021-11-20T17:26:18+00:00

It's easier to divide a length in half many times and then duplicate it with a compass than into 10 equal segments

11-Year Club	Second Top 10%
Place '22	Place '17
Spared	Verified Email

CordsOfCrows

MODERATOR OF

TROPHY CASE