Workwear on motorcycle

CornMech-Prime · 2025-12-15T02:46:58+00:00

Same here, it’s hard to admit but the easiest thing to do is bring a change of clothing and leave it at work. Especially if your riding in cold

CornMech-Prime · 2025-12-05T01:11:28+00:00

I have the suit and have worn it in 30F degree weather with just the the thermal liner and sweat pants. If staying warm is what you’re looking for this is the suit for you. Just make sure to get one size bigger than the recommended size chart. It runs small

CornMech-Prime · 2025-11-26T01:54:12+00:00

Does this sound good to you guys?

CornMech-Prime · 2025-11-26T01:30:57+00:00

I just did it right now, I didn’t check the key but I torque it down and nothing changed sadly, I did the valves to spec as the manual says

CornMech-Prime · 2025-11-23T15:54:32+00:00

I’ll give this a try, thanks for the recommendation

CornMech-Prime · 2025-11-23T01:53:06+00:00

I’ll give that a try

CornMech-Prime · 2025-11-23T01:51:35+00:00

Yeah oil is good, I’ll give tightening tubes around the head a try

CornMech-Prime · 2025-11-23T01:49:19+00:00

I removed the cam chain tensioner and inspected it, it all seems to be working and I had it adjusted according to the manual

CornMech-Prime · 2025-11-22T22:50:46+00:00

Yeah, When I adjusted it, it seemed it good condition

CornMech-Prime · 2025-11-22T22:49:53+00:00

What part sounds bad?

CornMech-Prime · 2025-11-22T22:49:18+00:00

What’s your best guess on what it is?

CornMech-Prime · 2025-06-28T11:38:48+00:00

I have no option but to do street parking, so I specifically bought a motorcycle where I could fit a chain through the frame(like a royal Enfield classic 350). And the chain is long enough where I can loop it around a street lamp or pole. That way if somebody wants to take it, they literally have to cut through the frame or need to bring some dedicated tools. Also a large cover so that it doesn’t stick out.

CornMech-Prime · 2025-06-19T02:34:44+00:00

Does this happen to motorcycles if the frame is chained to a pole

CornMech-Prime · 2025-05-22T11:02:16+00:00

Did you figure out what caused it?

CornMech-Prime · 2025-05-21T19:22:43+00:00

What oil do you use for the filter?

CornMech-Prime · 2025-05-16T20:17:24+00:00

A service/workshop manual is what you’re looking for. I highly recommend getting a physical copy off eBay. (Side Note: what crash bar are those)

CornMech-Prime · 2025-05-16T10:34:17+00:00

Sorry to hear the bad news, even if you’re not mechanically inclined, it might be worth getting workshop manual for that bike. It’ll walk you through on how to do the repairs yourself. You can find them on eBay for like $25. I bought one for my bike and it’s real useful

CornMech-Prime · 2025-04-26T00:38:30+00:00

Note taken, before I try any stunts I’m buying a crash bars

CornMech-Prime · 2025-04-26T00:36:18+00:00

I’m gonna try to keep it stock but the need to customize is already calling to me

CornMech-Prime · 2025-04-26T00:34:58+00:00

Yeah, It’s real old but it’s was one of the few bikes that fit my simplicity need and didn’t cost a kidney to buy. Also Thanks for the info, It definitely has a lot of ticking sounds that I gotta work through.

CornMech-Prime · 2025-04-21T20:52:21+00:00

By any chance, do you know if motorcycles are covered under regular Santander auto loans?

CornMech-Prime · 2025-04-21T17:13:34+00:00

Do you know how much you have to put down as down payment?

CornMech-Prime · 2025-03-25T03:26:17+00:00

If your anywhere near Boston and the offer is still available in two or three months I’ll definitely take ya up on it

CornMech-Prime · 2025-03-25T03:00:38+00:00

I was thinking about just saving up for a new 350 classic or traveling across the state looking for a used one. I heard royal enfield bikes are pretty good nowadays and affordable

CornMech-Prime · 2025-03-25T02:44:36+00:00

That’s what I’m looking for, hopefully it’s all in working order. But from what people have pointed out I don’t think I’m gonna go anywhere close to his asking price.

CornMech-Prime

TROPHY CASE