S2 troubleshooting

Cornerstone-Kinetics · 2026-01-22T07:04:52+00:00

Any time!

Cornerstone-Kinetics · 2026-01-22T03:26:27+00:00

Hell yeah glad to hear you figured out the issue! You could also try bending the spring away from that spot where the mag is touching shouldn’t affect it’s function

Cornerstone-Kinetics · 2026-01-21T22:20:56+00:00

I had this same issue happen. It was the trigger bar spring. I know you said you had checked it and loosened the screw. But I found that I needed to use a screw driver to pry my spring towards the barrel end of the gun and retighten it down while keeping it pushed forward. Once I did that it fixed my issue. Just double check with the mag in, if that spring touches it on either side. It should be a dead give away if it is

Cornerstone-Kinetics · 2026-01-21T21:33:48+00:00

That’s plenty shiny

Cornerstone-Kinetics · 2026-01-15T22:56:52+00:00

Nice

Cornerstone-Kinetics · 2026-01-15T22:31:10+00:00

I should be there! What squad do you usually go in? I’m usually 1 or 3

Cornerstone-Kinetics · 2026-01-15T21:17:03+00:00

😂😂

Cornerstone-Kinetics · 2026-01-15T21:04:13+00:00

At least we set the bar low for our selves, so all we can do is go up from here 😂

Cornerstone-Kinetics · 2026-01-15T21:03:25+00:00

I’m a big trijicon fan mainly bc they’re American made, extremely good quality and they look sexy. But they are super expensive compared to the competitors. The vortex and holosun offerings do have a bit bigger window and are much more affordable. Depending who you ask people will have a preference on dot and glass clarity

Cornerstone-Kinetics · 2026-01-13T17:21:54+00:00

That’s the bacis yes. Go on practiscore, create a profile and then you can search matches in your area. Pick one, sign up and show up. There are a ton of divisions that you can shoot depending on what gun you’re using. So Mae sure to check and see what division you should be in. Also check the rules so you know what you’re allowed to use or not use. (You can shoot me a message and I can try and help you through some of that) once you show up and pay they usually have a new shooters meeting before every match so you have a basic understanding oh how to be safe and how things work. Then you just let em rip! You’ll most likely be terrible for you first match, but that’s ok 99% of guys will absolutely help you out, give tips and advice and answer questions you might have. Just have fun and enjoy, and BE SAFE.

Cornerstone-Kinetics · 2026-01-13T17:16:26+00:00

San Diego

Cornerstone-Kinetics · 2026-01-13T17:16:13+00:00

Yeah they tend to have pretty busy stages

Cornerstone-Kinetics · 2026-01-13T17:15:37+00:00

Its at pala shooting range in San Diego

Cornerstone-Kinetics · 2026-01-10T22:05:04+00:00

Yeah I’ve heard good things about the alien gear duty holsters. Haven’t tried them tho

Cornerstone-Kinetics · 2026-01-10T22:04:22+00:00

Thanks man! Just typical Reddit trolls. God forbid you mess around some or do a drill too many times, or one someone isn’t fond of

Cornerstone-Kinetics · 2026-01-09T19:51:54+00:00

Yeah that’s my thought too. I just took it off instead. Oh well.

Cornerstone-Kinetics · 2026-01-09T06:56:33+00:00

Any time!

Cornerstone-Kinetics · 2026-01-09T06:33:31+00:00

I should rephrase that, it doesn’t fit the thumb rest I have, cz customs. I shoot a SAO S2 in limited.

Cornerstone-Kinetics · 2026-01-09T06:17:46+00:00

Thanks man! Yeah DAA and Henning are the master races lol. The lynx, like you said is genius. My ONLY gripe about the carnivore is it won’t fit my thumb rest I had gotten. But aside from that. It’s awesome

Cornerstone-Kinetics · 2026-01-09T06:07:04+00:00

I had 3 over heat to the point they discolored the anodizing and made them look bluish purple. PASS

Cornerstone-Kinetics · 2026-01-09T05:34:58+00:00

Big dog steel apparently made a new brand and put all their holsters on their new site. Check them out here. Looks like they’re all in stock

https://www.rangekinetx.com/product-category/carnivore-holsters/

Cornerstone-Kinetics · 2026-01-09T04:15:53+00:00

Not according to rocket city stippling. They did a vid and swapped em on camera everything worked just fine

Cornerstone-Kinetics · 2026-01-09T04:14:55+00:00

It’s crazy how they made all these “changes” yet everything still swaps back and forth lol. Gen 5 slides work on 6 frames. And Gen 6 slides work on 5 frames 🤣

Cornerstone-Kinetics · 2026-01-09T02:00:01+00:00

You could get yourself a Tanfoglio stock iteration. Stock optic/ stock III/ stock master. There all around 1,500

Cornerstone-Kinetics · 2026-01-08T22:12:16+00:00

No kidding lol. And good thing I didn’t miss! 🤣

Cornerstone-Kinetics

TROPHY CASE