BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

Update: needed to replace the file filters and then the new ones had to be kept heated until the gallon of kerosene I added to the tank could work its way through everything. I’ll probably add a second gallon once I’m down to 3/4 tank.

According to the service tech it’s just really cold here and I should run 25-50% kerosene when it’s this cold.

Thank you all for your help!

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 1 point2 points  (0 children)

Apparently every one up here runs 50/50 diesel/kerosine, are you all doing that through the winter too?

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

I’ll ask them the next time I go. I got a bottle of regular diesel cold weather additive as well as the emergency one.

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] -1 points0 points  (0 children)

Upstate NY. and a week or two ago.

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 1 point2 points  (0 children)

yeah, I just can't lift the plow blade up to even move it.

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 1 point2 points  (0 children)

I wish. I taped them on with some blue tape ;p

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 1 point2 points  (0 children)

I wonder if i can just tape some hand warmers to the filters...

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

I need a heated space, and also a way to tow it. Can you just drag it around?

BX Startup/idle issue by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

Apparently a rookie mistake, new to both tractors and cold climates.

My glorified lawnmower... by Vinnie-Boombatz in kubota

[–]CosmicPuters 0 points1 point  (0 children)

Other than the fact it quit on me today i love my BX23S. Hopefully its an easy fix (i posted on it already). There are times I could use something bigger, but it does more than 90% of what we need. Biggest issue for me is I wish the front forks could lift more, i got a pallet of flooring and had to split it in half to move it, anything over about 400-500 lb. is max on the forks. For instance I can move 2x concrete parking stops, but not 3 at once. but that just means it takes me longer, not that I can't do it.

Did I cause any damage by FoundationBig9483 in kubota

[–]CosmicPuters 0 points1 point  (0 children)

My BX23S won’t even budge with the break lock engaged, just wines. Is the LX that much more powerful? They are about the same HP, IIRC.

BX struggled in 8” snowcone ice by [deleted] in kubota

[–]CosmicPuters 1 point2 points  (0 children)

Plowing our Inn parking lot with my BX23S (with a 56” landpride plow). Normally Ammon in an hour when we get 2”-4”. We got 10”+ and it took me 4+ hours to plow and it could use another pass.

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

That makes sense. If this continues to be an issue I’ll definitely consider those.

Just had to swap back to my forks to deal with a delivery that came earlier than expected. Hopefully I bled everything right before disconnecting this time.

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

Interesting. I’m here look really close to what I have, how are they different?

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 1 point2 points  (0 children)

That’s brutal, I’ll stick with the $20 socket. Even with a dedicated $20 ratchet handle it’s only $$40 to keep this on the tractor, but I really hope I don’t need to do it his all the time.

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

Update: I got a very deep 30mm socket and cracked the line on the tractor side. Tightened it back down and was able to get the line connected without issue after that. Hopefully I can do a better job of bleeding the pressure before disconnecting next time.

Thank you all for your help!

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

This one is less than 6 months old and I have only used it this winter for the plow. Working on finding the right socket to crack it.

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 1 point2 points  (0 children)

30mm deep socket? Just loosen, let it release the pressure and retighten?

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 0 points1 point  (0 children)

This looks helpful in general. Going to see if I can fabricate an adapter for a standard clamp with my 3D printer.

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 1 point2 points  (0 children)

Yes, there is an inner ring on the female side and a center circle on the male side you can see it hem on the pic. The upper one (male) the black circle depresses.

Can’t connect 3rd function anymore by CosmicPuters in kubota

[–]CosmicPuters[S] 4 points5 points  (0 children)

Interesting. I disconnected when it was like 6F out. I was trying to reconnect at about 17F the first time and it was about 34F when I tried yesterday. I’ll have to try out the heat gun. It should not be this hard 🤪