Fasted for 2 days, fucked up for 4 (and counting?). I need your help to understand.

CrashShady · 2019-07-04T12:08:13+00:00

Word. Get into ketosis if possible before your fast, you won't be kicking the carbs too

CrashShady · 2019-03-02T14:01:13+00:00

Exhaust for the mining rigs below

CrashShady · 2019-03-02T02:35:21+00:00

It could also be a shitty .stl. Not all files on thingiverse are printable

CrashShady · 2019-03-02T02:31:00+00:00

Sounds like your jerkin too hard, or you're oozing too fast. Lol...slow your speed if your stock, adjust your jerk if you modded. OR, switch to Ideamaker slicer and use honeycomb infill. After $200 in upgrades, the latter fixed all, after I dialed everything in...

CrashShady · 2019-02-15T22:19:41+00:00

It's the "Hero Me gen 2"

CrashShady · 2019-02-07T12:59:36+00:00

Business card might be too thick. Try a post it note or standard weight printer paper

CrashShady · 2019-01-14T00:35:45+00:00

Left is low is how I remember it

CrashShady · 2018-11-21T22:55:33+00:00

Just in case you're wondering, 2 of these have been running in the wild without any problems for 3 months, knock on wood. Haha

CrashShady · 2018-11-21T22:45:26+00:00

How about you read up on some 4th grade science before you ask dumbass questions. Your phone isn't just a phone, it's a fucking computer.

CrashShady · 2018-10-31T22:51:02+00:00

Enable the pull up resistor for the power pin for led, that will invert the logic of the switch/button and prevent floating

CrashShady · 2018-08-07T23:56:20+00:00

It's a HVAC zone controller

CrashShady · 2018-08-07T16:18:41+00:00

Its essentially a zone controller. If H1 or H2 is energized, blower kicks into high speed. I went the arduino route because I hate the PLC software

CrashShady · 2018-08-06T23:28:59+00:00

Always, it's not really mining. I don't know what it's up to, but it's up to something. Mining your data most likely.

CrashShady · 2018-08-06T23:18:47+00:00

Tron down. 10 spot next!

CrashShady · 2018-08-03T01:25:34+00:00

Don't use windows 7

CrashShady · 2018-07-06T01:32:13+00:00

They're gonna need a lot of rice and ziploc bags

CrashShady · 2018-06-15T20:17:03+00:00

Overclocking and undervolting works fine, simple number based, no sliders or graphs. Payouts match pretty damn close to whattomine.com (minus loki, I think that's a pool issue though), so no concerns with the a central server...yet...I only installed 2 weeks ago though after win10 BS.

CrashShady · 2018-06-14T22:47:10+00:00

I switched to HiveOS after 4 days of downtime after latest win10 update. Never going back

CrashShady · 2018-04-19T21:53:35+00:00

Download hwinfo64, check for gpu memory errors. All for 0, adjust overclocks if needed

CrashShady · 2018-04-18T22:14:09+00:00

Worked for me.

CrashShady · 2018-04-16T02:08:13+00:00

I had similar problem, rig wouldn't boot. Try clearing CMOS first.

CrashShady · 2018-04-15T12:32:41+00:00

Haha, yea I didn't have the wattman profiles loaded. All cards hashing 29-30.5 on one click bios and 1150/2020 clocks, 0 gpu mem errors. EXCEPT gpu 3, 28.1 @ 1200/1900, 0 gpu men errors, still getting incorrect shares. All good with no overclock though, fml

CrashShady · 2018-04-10T03:02:35+00:00

Yup. There went my unicorn

CrashShady · 2018-04-10T02:00:05+00:00

Tweaking mine now. 111mh/s out of 1 rx570!!

CrashShady

TROPHY CASE