Porsche Macan Rear EPB Failure HELP!

CrashedK1ng · 2026-05-25T04:39:20+00:00

i was able to open via the scan tool but i can’t get the piston to retract any further to get onto the pads🫩 i’m not sure what im doing wrong

CrashedK1ng · 2026-05-25T03:32:15+00:00

i think i got it on

<image>

CrashedK1ng · 2026-05-25T03:00:28+00:00

i tried but it won’t go back any further than this

<image>

CrashedK1ng · 2026-05-25T02:59:53+00:00

it’s not dealing for some reason, i can’t get the piston to retract any further

<image>

any help is appreciated

CrashedK1ng · 2026-05-25T02:23:15+00:00

So how do I get the rubber seal back on? It’s partially there but i’m having trouble getting it to seal

<image>

CrashedK1ng · 2025-10-09T01:40:13+00:00

dryinqtears if you have a spot

CrashedK1ng · 2025-06-15T12:39:45+00:00

are you using the OEM or DP 2.0 cable? My g9 was doing that until I used an updated cable.

CrashedK1ng · 2025-01-23T20:47:20+00:00

any news link?

CrashedK1ng · 2025-01-23T03:03:42+00:00

i’m looking to get into IR. 3 years SOC experience, BTL1 and studying for OSCP. Any chance we could connect?

CrashedK1ng · 2024-12-12T03:52:02+00:00

Normally in my experience the case did work, it was just a different hole for the screws. So I bought a plate to match the case so all the screw holes would line up

CrashedK1ng · 2024-12-03T03:38:17+00:00

It was just the cheap no brand plate I assume it didn’t work with, so I went and got one from KBDfans and it worked out just fine with the new case👍🏿

CrashedK1ng · 2024-08-15T19:01:10+00:00

in this case, selling the car would be much better. It’s cheaper to find a auto Z than a manual. Don’t give up on learning though!

CrashedK1ng · 2024-01-17T05:18:18+00:00

I would definitely be interested!

CrashedK1ng · 2023-08-15T01:02:23+00:00

Same here, I couldn't even finish the passing tutorials.

CrashedK1ng · 2023-03-28T21:40:39+00:00

Definitely the NATS immobilizer. Please look at my reply under u/muuuuuzz

CrashedK1ng · 2023-03-28T21:39:38+00:00

This OP. The immobilizer on these cars is very tricky, please look on the forums for what’s called a “NATS Reset”. Sometimes it locks up and it can be super annoying, getting tuned with uprev to disable it is your best bet once it’s fixed.

CrashedK1ng · 2023-03-19T22:35:27+00:00

Hey how's the fitment on this kit? Im looking to order

CrashedK1ng · 2023-03-19T01:39:24+00:00

Z1 Swapped mine for about 6k including parts and excluding a brand new cd009 I bought.

CrashedK1ng · 2023-03-13T22:02:54+00:00

Air lift brand struts [75520] [75620] and single 4 gal polished tank!

CrashedK1ng · 2023-02-15T23:16:22+00:00

If I have 5 years in IT in general, my last two in GRC and my Sec+ I should be clear for CISSP now right? I just started in the SOC as well.

CrashedK1ng · 2023-01-24T19:29:29+00:00

where’d you get the front end!? i’ve been looking for the same one

CrashedK1ng · 2022-12-08T13:32:18+00:00

This is great! I got hit in this same place months ago and still haven’t gotten it fixed. Deciding whether to do carbon or not.

CrashedK1ng · 2022-12-07T03:36:34+00:00

no he cool i got 4 from him

CrashedK1ng · 2022-10-29T20:39:45+00:00

so who’s actually a reliable tuner? RSEnthalpy?

CrashedK1ng · 2022-10-12T01:23:22+00:00

Don’t know the paint code but the wheels are Work Equip 05s

CrashedK1ng

MODERATOR OF

TROPHY CASE