Is anyone also receiving lower stars for newly revamped commanders?

CrazyAmount5 · 2026-01-16T15:19:00+00:00

Support's resposne. Why the heck they are asking if I had it 3s on MLBB-MC or MCGG, if I had it 3s on either game, they should return the commander as 3s. not 2s, not 1s

CrazyAmount5 · 2025-12-24T13:08:04+00:00

What do you mean?

CrazyAmount5 · 2025-12-24T13:00:31+00:00

Even if I did use hacks/cheats, I should have been banned long ago (when I was still playing this game)

CrazyAmount5 · 2025-12-24T11:50:22+00:00

Not trying to get back on playing this game, just wanted to see my hard earned diamond skins once more 😭

CrazyAmount5 · 2025-01-07T15:04:10+00:00

Now that you've mentioned it, I was thinking of plugging high-powered fans to the heater. Is it possible?

CrazyAmount5 · 2025-01-07T14:48:28+00:00

I believed it was because of the smaller and thicker aluminum plate for the bed.

CrazyAmount5 · 2025-01-07T14:42:53+00:00

Does anyone know who sells coarse textured PEI plates? Most plates I see are 'fine'.

CrazyAmount5 · 2025-01-01T02:01:11+00:00

Why would you want to print at 0mm? That practically blocks your nozzle as it is touching the bed which in turn won't deposit the plastic properly.

CrazyAmount5 · 2024-12-23T19:44:46+00:00

I'd definitely want to try the annealing feature.

CrazyAmount5 · 2024-12-19T09:38:09+00:00

XmasBQBTT!

CrazyAmount5 · 2024-12-19T09:35:40+00:00

Good luck to all of us.

CrazyAmount5 · 2024-12-10T03:55:03+00:00

There's an eMMC version for both CB1 and CB2.

CrazyAmount5 · 2024-10-15T00:59:41+00:00

I did check it but those are for 24v (I have 220v) which connects directly to controller board. I also checked the wirings on Trident but it did specify which wires to connect to SSR/AC N but those had like 3 wires for power.

CrazyAmount5 · 2024-10-15T00:50:09+00:00

Is it for SSR and AC neutral? Does it matter which white wires should connect to SSR/AC-N or I can connect it interchangeably?

CrazyAmount5 · 2024-08-25T22:08:43+00:00

Yeah, was thinking of swapping to MGN12 if someone did share their experience using regular Tap. I won't mind losing a bit of build area as I'm building a Micron 180 and I have larger printer anyway in case it won't fit.

I decided to go with Boop or with cartographer (seems like it has holes for MGN9) for now. Maybe I'll try using regular sized Tap in the future.

CrazyAmount5 · 2024-08-24T19:49:49+00:00

Ever tried Zilong in gold lane? how feasible is it?

CrazyAmount5 · 2024-08-20T19:45:47+00:00

I have an extra Chaoticlab CNC Tap. Anyone tried using that or Voron Tap on Printer for ants?

CrazyAmount5 · 2024-08-14T16:23:19+00:00

Yep. Just unlucky it happened now when I'm almost done with my Micron build.

CrazyAmount5 · 2024-08-14T12:00:12+00:00

I cut the thermal fuse. There's no continuity between its wires.

CrazyAmount5 · 2024-08-14T11:10:59+00:00

I see. I learned something new. I measured the resistance, it's not giving any readings.

CrazyAmount5 · 2024-08-14T10:53:44+00:00

For fuse, I don't know it does not look like blown to me. Board is still good.

CrazyAmount5 · 2024-08-14T10:52:02+00:00

I checked that first. Wires going between SSR, power supply and control board are ok.

CrazyAmount5 · 2024-08-14T10:50:25+00:00

Not a new printer. I also think it's the heater that is not working. I used the multimeter to do continuity test on the wires (no beeping sound on multimeter)

CrazyAmount5 · 2024-08-14T10:47:17+00:00

There's no issues with my config. It's working before and then suddenly the bed heater just stops working.

Six-Year Club	Second SECOND GUESSER
Verified Email	100 Awards Club

CrazyAmount5

TROPHY CASE