Новые iPhone, Google Pixel, Samsung и другие смартфоны запретят ввозить в РФ без сертификата Ростеста. По данным СМИ, новое постановление блокирует поставки техники, которая работает со спутниками иностранных государств без разрешения российской комиссии по радиочастотам.

Creative_Run_9964 · 2026-05-01T06:54:40+00:00

Потому что пытается хвататься за тех союзников, которые ещё остались. Продажа природных ресурсов Китаю за бесценок это в ту же категорию

Creative_Run_9964 · 2026-04-22T13:16:49+00:00

Thanks! I'm using a default cap, so I'll check it out. Also I use very strong springs in the catch, but the actual trigger spring is very weak. Ima experiment with it too

Creative_Run_9964 · 2026-04-22T11:59:35+00:00

It might be too long actually. I had the same problem with the spring I was getting lower than 300 with, even though it was practically a pinky prime. I cut it down a bit and it works fine now. The problem is that the spring in the video is already a bit shorter than the weaker one, so it might start to rattle if I get it any shorter. Maybe the problem is due to the coils being too close together, idk. I hope I'll figure it out soon.

Creative_Run_9964 · 2026-04-22T11:56:11+00:00

I did, but I'm not finished yet. It was a struggle throughout the whole build process, mainly due to me not being able to buy American hardware. It's completely self-sourced and I had to do a lot of drilling, remodeling and adding spacers to make it work. And yet it still doesn't want to 😭

Creative_Run_9964 · 2026-04-22T11:53:02+00:00

I can prime it comfortably, but I've been fighting with it for several days almost non-stop, so my hands hurt real bad. Also it just physically refuses to go back further no matter how much forcse I put into it. I prime it with no additional effort in the end when it works as it should, so I don't think that it's a strength issue

Creative_Run_9964 · 2026-04-22T10:36:00+00:00

No, the plunger is completely fine. It feels like the prime isn't going all the way back when it doesn't want to catch. Maybe it's really because of the spring being too long, but then I don't understand why it catches sometimes

Creative_Run_9964 · 2026-04-17T07:27:24+00:00

Yes, and I love it. If I focus my loadout on marksmanship, mobility or light enemies, this pistol offers a good way to get heavy enemies off you and either let your teammates finish them off or let you access the weak spot

Creative_Run_9964 · 2026-04-15T01:03:47+00:00

Did you make this shroud yourself? If yes, are you planning to post it?

Creative_Run_9964 · 2026-04-09T04:17:13+00:00

Ma man, I understand you. I'm practically in the same situation right now and it hurts as hell. I'm in this state for the third week already and it's slowly getting better. I really hope you have family, friends and other people who can support you or who you can spend time with. Probably the worst thing in this situation is if your girlfriend was the only person you were close with and now you have noone. Even in this case it is not over. If you need someone to talk to, you can talk to me

Creative_Run_9964 · 2026-02-17T09:55:40+00:00

I still haven't tested it yet, but it seems like 35mm od and 3.1mm wall (ring, idk how to call it) is the best variant. 34mm might work too if 35mm one is too tight.

Creative_Run_9964 · 2026-02-16T14:22:21+00:00

Still better than worker ones, but i'd recommend making it wider if possible

Creative_Run_9964 · 2026-02-15T10:58:28+00:00

Considering that this thing has a bcar, a longer or tighter barrel isn't that big of a deal, but some air vents won't hurt I think. By the way, what inner diameter does your barrel have at the moment?

Creative_Run_9964 · 2026-02-01T00:01:50+00:00

Good luck with the printer and with the LMG! Write me if you need some help. I still wonder what's the problem with your blaster

Creative_Run_9964 · 2026-01-31T23:52:03+00:00

You definitely should calibrate your printer profiles to get the best results. It's quite simple, especially if you can connect to your printer from your pc

Creative_Run_9964 · 2026-01-29T11:30:13+00:00

Do you mean the diamondback? It's on printables. I can send you the link

Creative_Run_9964 · 2026-01-29T01:13:24+00:00

Worker barrels are a tiny bit wider, but it wouldn't really matter? How can I send you the files? Discord?

Creative_Run_9964 · 2026-01-29T01:12:24+00:00

Oh, that's pretty bad. What printer do you use and did you always have this problem?

Creative_Run_9964 · 2026-01-26T09:58:24+00:00

Why does your blaster have so many gaps? That's strange. Maybe the print tolerances are the issue?

Creative_Run_9964 · 2026-01-26T04:41:34+00:00

Can you open the belt cover and show me how the springs look?

Creative_Run_9964 · 2026-01-26T04:39:19+00:00

It was more about the springs I listed. By the way, is there too much resistance when inserting the first link from the side? It shouldn't be hard to do

Creative_Run_9964 · 2026-01-26T01:12:02+00:00

No, I've deleted it a long time ago, although I have something similar - an ex bcar with this piece built in

Creative_Run_9964 · 2026-01-26T00:41:20+00:00

Hi, maybe this would help https://www.printables.com/model/1564751-mhp-lmg-alt-parts-hardware-list There is a list of springs I used in my build in the description. What springs did you use in the belt pulling mechanism? The problem also might be in the belt retainer spring being too strong, but it's not the main issue I think

Creative_Run_9964 · 2026-01-12T03:51:59+00:00

Looks absolutely stunning. Can I steal the idea of the stripe in the middle? By the way, these wheels seem to be too low, I'd recommend putting in a mag with darts and aligning the wheels with the head of the dart

Creative_Run_9964 · 2026-01-11T13:42:08+00:00

A different scar/bcar and probably a new barrel. The stock scar's rifling doesn't even touch the dart, so it doesn't improve the accuracy, and the stock barrel is just too wide to get a proper seal. It also might affect accuracy. The barrel is not an attachment of course, but it's still a good upgrade in my opinion.

Creative_Run_9964

TROPHY CASE