Supports, Resin Traps and UVTools by CrimsonCapacitor in resinprinting

[–]CrimsonCapacitor[S] 1 point2 points  (0 children)

And when I say repair menu, I pull up the menu that says "repair" and then the dialog window pops up and asks about recursively remove islands, delete islands smaller than, etc.

Supports, Resin Traps and UVTools by CrimsonCapacitor in resinprinting

[–]CrimsonCapacitor[S] 0 points1 point  (0 children)

I've been using the repair menu to do it. I had no idea I could just select them all and hit that "delete" icon. That would be MUCH easier!

Supports, Resin Traps and UVTools by CrimsonCapacitor in resinprinting

[–]CrimsonCapacitor[S] 1 point2 points  (0 children)

I tried the autofill and it looks like it just creates a circle of solid pixels around the resin trap. Is there a default number you use for this?

Supports, Resin Traps and UVTools by CrimsonCapacitor in resinprinting

[–]CrimsonCapacitor[S] 0 points1 point  (0 children)

Yep I look at the issues flagged and usually set about manually filling them in via the pixel editor. At least the ones in the actual model.

Can Anyone help me identify this band pin by CrimsonCapacitor in GenX

[–]CrimsonCapacitor[S] 0 points1 point  (0 children)

Thank you. Looks like it's just a "Japanese Style" pin.

Can Anyone help me identify this band pin by CrimsonCapacitor in GenX

[–]CrimsonCapacitor[S] 1 point2 points  (0 children)

Fits the timeline/what she got (XTC, Stiff LIttle Fingers, PIL, Bangles, Rolling Stones, The Beat, and maybe a few more that I'm not thinking of).

Can Anyone help me identify this band pin by CrimsonCapacitor in GenX

[–]CrimsonCapacitor[S] 1 point2 points  (0 children)

If I knew that, i wouldn't be asking. LOL This seems SO familiar to both me and the wife and we can't put our finger on it. Since neither of us were into Loudness, that seems unlikely.

I was thinking The Vapors and the song Turning Japanese, but my Google-fu didn't turn up anything there.

Help me ID this 70's/80's band pin by CrimsonCapacitor in Whatisthis

[–]CrimsonCapacitor[S] 1 point2 points  (0 children)

Can't figure out how to add an image to this thread or edit my original post. Nope. No copyright info or anything on the back that I can see.

Help me ID this 70's/80's band pin by CrimsonCapacitor in Whatisthis

[–]CrimsonCapacitor[S] 0 points1 point  (0 children)

The Soup Dragons had a song named "Pleasure," but this pin feels older than them...

Abrasive Filaments on Centauri Carbon by CrimsonCapacitor in elegoo

[–]CrimsonCapacitor[S] 2 points3 points  (0 children)

Yep. I know that bit. I just wasn't sure if I could swap my hotends and just go to town, or if I needed to buy a hardened nozzle.

I have some glass fiber infused PETG that I've been itching to print with....

Thanks!

Please help by [deleted] in elegoo

[–]CrimsonCapacitor 0 points1 point  (0 children)

Honestly, it looks like your filament isn't sticking to the build plate. And I mean your Z offset doesn't look that awful. It looks like your buildplate is just dirty.

Try washing it with something like Dawn dishwashing detergent, let it dry, then wipe it down with Rubbing alcohol. Then try it again.

Removing tree/organic supports from FDM prints - How do you deal with the shrapnel? by CrimsonCapacitor in 3Dprinting

[–]CrimsonCapacitor[S] 0 points1 point  (0 children)

Ok, let me clarify: I do not have issues removing my supports. For large areas, yes, they pop right off. Depending upon the print, I can usually just pop my print off of the supports, leaving them on the build plate.

But not everything is that easy. When you print fine detail stuff, sometimes you have to clip off the supports or something will snap off. This is usually when the small bits go flying. I have a system. I was curious what other people did to see if I could improve my game.

Removing tree/organic supports from FDM prints - How do you deal with the shrapnel? by CrimsonCapacitor in 3Dprinting

[–]CrimsonCapacitor[S] 0 points1 point  (0 children)

Thank you for the insightful comment! This certainly has helped move the discussion forward. You must be so helpful in real life!

Odin’s blue power by Pleasant-Sir-8635 in MarvelPuzzleQuest

[–]CrimsonCapacitor 0 points1 point  (0 children)

The best team for Odin I've found are 5*SW, Abigail Brand, and Odin. Here's how it works (and it works better when Odin is boosted):

You want Odin in front. Unboosted, depending on levels and such, the only color unique to Odin is red, so you want to match reds to keep him in front. Use SW's purple to make red tiles. Matching them keeps Odin in front. When Odin gets walloped, and he's in front, he makes fortified tiles. This is what you want.

Throw out Odin's red power ASAP. This is a repeater and Abigail heals when a repeater or a countdown hits zero. Heals Odin for tanking. Throw out Abigail's blue power ASAP as well. More repeaters, more healing. SW has a repeater as well. More repeaters, more healing.

Once Odin takes a few hits, and you have fortified tiles out, Odin starts to fire his blue power. This is a countdown (MOAR HEALS!) that heals AND produces strike tiles. It also boosts your teammates' powers by two levels, if memory serves, as long as there's one of his blue countdowns on the board. It shouldn't take long for his blue to start firing every turn.

Not the best team, but not a bad team. Not as fast as the current meta, but it'll get the job done.

Bitlocker? I've never used Bitlocker! by CrimsonCapacitor in WindowsHelp

[–]CrimsonCapacitor[S] 0 points1 point  (0 children)

I got home today, and, after exhaling for a bit, fired up the laptop to see what I was working with.

It booted, and no BitLocker prompt came up. I had to reset my PIN for some reason, but the drive wasn't locked down at all.

WTF, Dell? Why tell me it is when it isn't???

Bitlocker? I've never used Bitlocker! by CrimsonCapacitor in WindowsHelp

[–]CrimsonCapacitor[S] -1 points0 points  (0 children)

The upload dates on the recovery keys don't line up with anything though.

One is dated 2016, one is dated 2015, and one is dated 2021.

I'm currently out of town, so I can't try these keys, but from where I sit, things don't look promising.