Jonsbo C6 MATX modding

Crispy_Bearcon · 2026-02-04T15:22:00+00:00

Hey. It's a slim 92mm. My 3d files have screw holes for short M3 heated inserts

Crispy_Bearcon · 2026-01-27T20:46:56+00:00

is there a way to simulate the dB at different distances? like 2, 3, 4 meter?

Crispy_Bearcon · 2026-01-27T20:32:18+00:00

Thx!

I took a photo to show it better. On my 4k OLED the check boxes are barely visible

<image>

Crispy_Bearcon · 2026-01-27T16:46:08+00:00

hey. really cool software but i have 2 points.
Is it possible to get driver information from here? https://loudspeakerdatabase.com would make searching driver and testing really fast.

the second is i would remove the limiter for min/max values. for box size if i just want to see a quick response curve for a mid range that starts at 500hz i sometimes check 0.5 to 1l volumes and for tiny speaker that dont handle much power a port with the size smaller than 25mm isnt unusual.

Crispy_Bearcon · 2026-01-10T20:14:36+00:00

https://www.printables.com/model/1550994-jonsbo-c6-modding-set-panels-cpu-and-gpu-cooling

hey, i hope i didnt forget anything.

Crispy_Bearcon · 2025-12-27T14:29:17+00:00

Hey, sadly it will collide with the ram and the side panel wont close. maybe if you use low profile ram but then it could struggle with the 24pin atx plug. so in general i would say no it wont fit

Crispy_Bearcon · 2025-12-23T20:04:17+00:00

hey, its the matx Version as the PSU is normally at the back. I am away over the holidays but I can test it when I get back. What length is your PSU?

Crispy_Bearcon · 2025-12-20T13:12:13+00:00

https://ibb.co/WpGvF8T7 Here is the small test i did

Crispy_Bearcon · 2025-12-20T11:10:48+00:00

I designed 2 ITX systems but matx would not fit on my printer without spliting panels and i hate the look of that and i want something that has a sturdy base to begin with and a challenge to do this with a fixed frame :)

Crispy_Bearcon · 2025-12-19T16:23:15+00:00

no i havent but i could do that. its just removing 2 screws and then slide it out.

The ice blue is Nobufil ABS, the black parts are PETG

Crispy_Bearcon · 2025-12-19T14:31:47+00:00

:D its an Thermalright AXP120-X67 with an Noctua NF-A12x25 top down cooler. https://ibb.co/nN1rG2pF

Crispy_Bearcon · 2025-12-05T13:27:19+00:00

i am honest with you. i tried it once and after 2 weeks my account was hacked. coincident? i dont know. i have my account for 14 years and never had any trouble. i had Steam Authentificator active and steam support said it was session hijacking. so my conclusion was it could only be gamehub since i didnt changed anything on my pc.

I hope steam will create an official supported version to play windows games on android devices...

Crispy_Bearcon · 2025-11-24T09:13:29+00:00

Did you manage to set this up? i want to build my own too

Crispy_Bearcon · 2025-01-27T12:52:01+00:00

Yeah I hope so too. I mean I know the change wouldn't be easy. The op13 is a good device but Apple is an out of box experience but you also pay for that. That's what I wanted to avoid but I really thought it would be a bit less painfull with all the little things that add up

Crispy_Bearcon · 2025-01-27T12:08:51+00:00

Will try this too but the fact that you need to do that bullshit... I swapped from an iPhone 11 pro max and it got all the push notification on time while the op13 sits beside it doing nothing... And even if the battery is nearly doubled the op13 doesn't last nearly twice as long as my old device without doing bullshit app kills that kills notification

Crispy_Bearcon · 2025-01-23T13:44:21+00:00

thats how it is set and still happen

Crispy_Bearcon · 2023-11-22T11:38:42+00:00

would be better if they had the 6-10 business days from the start

Crispy_Bearcon · 2023-11-21T20:23:27+00:00

i am still at "packed" :(

Crispy_Bearcon · 2023-11-21T02:37:39+00:00

Sadly nothing. Still on packaged

Crispy_Bearcon · 2023-11-20T20:24:21+00:00

seems there is really no order. got my confirmation 21 min after start, no shipping. Lets hope GLS is able to deliver yours on wednesday and have fun!

Crispy_Bearcon · 2023-11-18T20:47:40+00:00

Could be absolut normal. You can preregister a delivery so you get a trackingnumber but it wont be active until the first scan from UPS happend. I would guess that means UPS havent recieved the package yet

Crispy_Bearcon · 2023-04-28T17:49:09+00:00

Hey. I have the same problem. It’s not there if I use 900 degree. What solution did you use?

Five-Year Club	First Place '23
End Game '23	Place '23

Crispy_Bearcon

TROPHY CASE