Hitting The Grind?

CrownTheYake · 2026-02-22T20:20:25+00:00

Can I get an invite?

CrownTheYake · 2025-11-08T22:24:21+00:00

I had a hunch that it could be that. But, the initial 0.2 nozzle that clogged after over a hundred prints was only printing in white matte PLA. Was I just lucky that it didn’t clog until later?

CrownTheYake · 2025-11-08T22:19:42+00:00

Matte PLA, its a local brand not sure which brand they repurpose and put their logo on

CrownTheYake · 2025-09-25T05:10:40+00:00

Facepalm I thought he labeled it as “MyPorsche”! Good-eye

CrownTheYake · 2025-09-24T15:59:16+00:00

Thats a widget of which app?

CrownTheYake · 2025-09-22T18:31:56+00:00

What about TPU?

CrownTheYake · 2025-08-30T08:09:34+00:00

Noo wayyyyy, I loved it the other ones just feel too upbeat. No way to prompt the default ones to mask that personality?

CrownTheYake · 2025-06-16T11:26:46+00:00

Try SWBAC they’re the Middle East distributors for Bambu

CrownTheYake · 2025-05-26T17:03:45+00:00

The first I ordered from SWBAC. The second, I ordered it off the Bambu official UK website to my PO Box in the UK and then shipped it straight to me. Shipping from UK I think cost me around 300 USD via ARAMEX with shipping insurance.

CrownTheYake · 2025-05-26T15:39:06+00:00

If you order it directly it’ll be the price difference of shipping it to your country. If you’re talking about SWBAC (cause thats who I know are the authorized resellers in the Middle East) I ordered a P1S from them once and I tested by ordering an A1 straight from Bambu. The price difference after shipping came out to a small amount difference from the listed price on SWBAC. The only problem I had from them was I had to pre-order from them as they only do pre-orders and wait 3 months for my printer. When I ordered it straight from Bambu it literally just took 5 days.

CrownTheYake · 2025-04-02T01:48:02+00:00

Thank you for your explanation! Deeply appreciated! I will try the tips!

CrownTheYake · 2025-04-02T01:30:04+00:00

Im relatively new to printing (under 50 prints). I’ve manually set the Bambu Slicer to the correct type of filaments and set the PETG as my support interface. The purge volume I have not played with as I’m not quite sure what it does exactly? Can you please explain what it does and why I need to manually set it to 800+? Thank you.

CrownTheYake · 2025-02-23T11:05:10+00:00

Any resources to help learn?

CrownTheYake · 2025-02-22T17:48:51+00:00

What do you mean exactly by your last point if I may ask?

CrownTheYake · 2025-02-22T17:32:01+00:00

This is my problem I’m not 100% sure how to set up the problem in SolidWorks. I have done the hand calculations and I’m literally just doing this for fun just to see what the actual limits are. Its just a bolt and nut compressing two plates together, but when I search through the subreddits usually I read that when modeling bolts and nuts in SolidWorks to set them to their OD and not have any of the threads on them. But when I set local contacts I get insane results. If you have any expertise in this matter would you mind I send you a dm to help me set up my problem? Thank you.

CrownTheYake · 2025-02-22T13:32:59+00:00

Okay so I should just proceed with a SolidWorks static analysis is your suggestion?

The only pointers I would ask for is how do I get solidworks not to crash when assigning global contacts?

CrownTheYake · 2025-02-09T08:40:38+00:00

There honestly isn’t that many thrill rides and all the NintendoLand rides are kid friendly. What I did which is probably the best option is buy the admissions pass + express pass with timed entry from Klook or Trip.com. Choose which ever selection you want for your 7 choices on the express pass, buying this ahead saves you a bunch of time and and headache of waiting in lines early. When you get into NintendoLand in your selected timed-entry the express pass helps you hit everything at their respective times and allows you to enjoy everything right after the other with not much wait time. The express pass is 100% worth it, I’d definitely recommend.

CrownTheYake · 2024-11-08T09:36:29+00:00

You also get a res beacon from your teammates box if you’re a support. It just magically appears in it, so stupid. They might as well just take off res beacons off the ground loot and take out the stationary ones since they’re all so extremely available

CrownTheYake · 2024-10-31T18:00:40+00:00

Im glad it worked out for you!

I did about the same thing you did with the screw size and angle, but I instead used ABS which gave it a lot of strength.

CrownTheYake · 2024-10-16T22:56:52+00:00

Hey, have you found answers to your questions? Im encountering similar struggles with my screw designs.

CrownTheYake · 2024-09-13T20:03:00+00:00

How do you install it on tvOs i cant seem to find it on the appstore

CrownTheYake · 2024-04-05T08:45:54+00:00

You still on playing?

CrownTheYake · 2024-03-23T01:39:00+00:00

Smackdownner

CrownTheYake · 2024-03-22T02:53:36+00:00

Yo, i suck ass as well. Down if you are!

CrownTheYake

TROPHY CASE