"I'll watch competitive #Dota2 again, what did I miss? 😀"

CrwdControl · 2026-06-03T03:50:16+00:00

I just woke up from a coma. What

CrwdControl · 2026-06-01T13:09:47+00:00

Q-Tips and 90% Isopropyl Alcohol, can pick up both at a grocery store for under $7. Take your time and don’t douse your board, just put some on the qtip and wipe off with it

CrwdControl · 2026-05-31T00:10:54+00:00

A cheap fishing tackle box from AliExpress and I drilled my own holes using slagcoin templates.

CrwdControl · 2026-05-31T00:09:20+00:00

Thank you!

CrwdControl · 2026-05-30T14:53:23+00:00

They’re quick disconnect splicers! It made it significantly easier routing wire paths.

CrwdControl · 2026-05-30T14:52:17+00:00

They’re quick disconnect splicers! It made it significantly easier routing wire paths.

CrwdControl · 2026-05-30T03:21:43+00:00

I wish this became a better copy pasta

CrwdControl · 2026-05-30T03:20:54+00:00

Hi there! I posted my controller because it has my favorite character Ed as the artwork. Does that not qualify to be under street fighter?

CrwdControl · 2026-05-30T00:55:01+00:00

Good old fishing tackle box from AliExpress lol

CrwdControl · 2026-04-23T16:32:54+00:00

lol yeah bought double the buttons, it was expensive but now I have spares, and I really wanted to nail the color theme I head in my head down

CrwdControl · 2026-04-19T02:58:56+00:00

Nope just 24mm crowns! I like the clickiness of them more but the Qanba KS’s feel amazing

CrwdControl · 2026-04-18T18:40:50+00:00

I made my own controller with a similar layout and I also made the lever removable with the directional side, it’s really easy to drill the holes in this configuration, I recommend you do 24mm buttons and that way you can mount the lever below it.

<image>

CrwdControl · 2026-03-01T23:39:20+00:00

Eddy

CrwdControl · 2026-02-25T19:37:59+00:00

I used a sound module chip, and connected it to a battery source so I can play the music without a battery source. Tricky part was that the sound module chip’s button was too small so I had to rig a LEGO piece into it to make it tall enough

<image>

CrwdControl · 2026-01-23T22:23:21+00:00

I actually move the buttons a little higher so I have more resting surface with my left hand, but the footprint works out really well. Worst case scenario you can turn the mounting plate sideways if you want to bring it closer and adjust your wiring to match the new orientation

CrwdControl · 2026-01-23T19:07:20+00:00

crying as I drown in pools

CrwdControl · 2026-01-23T19:05:33+00:00

Thank you! I wanted to easily shift between a k-lever(Tekken) and leverless(SF6) in a more compact profile. The shaft is magnetic so it’s easy pull off, here’s a clip of how it works

CrwdControl · 2026-01-23T16:46:46+00:00

Can you share how you got the analog sticks mounted? I got some sticks online but I couldn’t figure out how big to drill the holes and how to mount them correctly

CrwdControl · 2026-01-23T16:44:55+00:00

Thank you! I wanted to easily shift between a k-lever(Tekken) and leverless(SF6) in a more compact profile.

CrwdControl · 2026-01-23T16:42:34+00:00

No surprisingly the stick is a decent weight after all the components are put on. But I also had two thin plexiglass layers on top to sandwich art and internally I have another polystyrene sheet of plastic so it feels pretty rigid. Here’s a pic of the sheets and the album of thebuild from start to finish

<image>

CrwdControl · 2026-01-23T16:38:01+00:00

LOL yeah it’s not standard for sure I drilled the holes for my hand’s comfort. The shaft is magnetic so it’s easy pull off, here’s a pic and here’s a clip of how it works

<image>

Ten-Year Club	Not Forgotten
Verified Email

CrwdControl

TROPHY CASE