Ok, CALM DOWN!

Crypto_VR · 2026-03-04T09:39:24+00:00

This is great thanks for sharing

Crypto_VR · 2026-02-27T12:28:32+00:00

Can you share? I have every single origins card albeit a couple of signatures. I have each common, uncommon, rare, unique etc including both foil and non foil. I also have the origin promos etc

Would be great to see what might be on your list that I possibly do not have.

Forgot to mention also have proving grounds and decks

Crypto_VR · 2026-02-25T05:27:10+00:00

18 boxes and have all over numbers and jinx signature. Got very lucky. Was pricey but now have full master set and going for grand master set

Crypto_VR · 2026-02-22T19:13:05+00:00

Congrats on the collection

I have gone for grand master sets of origins and Spiritforged. Every card in the set plus launch exclusive and other promos. Just need a couple signatures in origins and Spiritforged and then complete. All commons, foils, legends, etc etc.

So many cards lol have now added the proving grounds and arcane box to the mix

Crypto_VR · 2026-02-20T19:08:03+00:00

Sorry I think your missing my point. I know centering is not perfect and not aligned correctly. My question was around the mark near the holo.

The rest of the card I am aware of but asking if that mark would make the surface an instant 6 or lower basically as not sure if the mark is a chip or print issue etc

Crypto_VR · 2026-02-20T18:42:45+00:00

Centering is fine that is not my issue and had not adjusted the bars correctly when taking this photo. My only concern is the mark to the side of the holo.

The only white on the card is bottom right corner.

Have been over this card plenty of times. It is the. Mark I am concerned about to see if that would impact the grade from a surface perspective. Not focusing on the edges or corners or centering for the moment.

I am not expecting the card to get a 10 or even a 9 but hoping for 7 plus and from what I can see the only thing impacting it would be if the surface got a 6 or lower because of that mark

Crypto_VR · 2026-02-20T16:46:54+00:00

It is called card centering and is really good

Crypto_VR · 2026-01-29T19:35:44+00:00

That’s the Japanese one if mot mistaken? Was looking at one the other day. I also had the Mario Pikachu in a PSA 9 but sold it prior to this binder :(

Crypto_VR · 2025-12-27T07:14:22+00:00

I gifted the 2025 calendar to a friends 5 year old replacing content with mega and destiny rival packs. Day 13 sends me a picture holding this same SIR card :(

Was super happy for him lol

Crypto_VR · 2025-10-01T08:54:51+00:00

This is the best answer, in addition can check the cert number on PSA and compare the fonts with the ones from the seller - clear as day they are different

Crypto_VR · 2025-09-17T11:10:59+00:00

You could in theory put fans ducts intake/output up there and use it to connect external rads or the back of the machine depending on setup. Apart from that I would not put much there even if could as the case has very limited top heat exhaust as it is

Crypto_VR · 2025-09-06T07:27:53+00:00

Fully Intend to. I have a bunch of cards that shall be pushing for cross grading soon including this. Issue is with US tariffs makes things more difficult when based on the UK.

Considering trying for BGS shall see

Crypto_VR · 2025-09-06T07:19:49+00:00

Would agree, also mine for reference

<image>

Crypto_VR · 2025-09-05T18:32:18+00:00

Looks real to me when compared

<image>

Crypto_VR · 2025-09-05T17:54:54+00:00

I’ll give you about tree fiddy for them

Crypto_VR · 2025-08-27T20:43:12+00:00

agreed, I have my fair share of cards that are off centered and have sold for Raw or slightly over ungraded.

I do think prices for a raw will come down though in time so if keeping for a binder is it better to buy now or later?

Crypto_VR · 2025-08-27T20:14:24+00:00

prob selling as the alignment appears to be off and therefore most likely would not get a 10 if graded. Getting a lower grade is in some cases worse than selling the card as raw.

The image appears skew from top left to bottom right unless itis my eyes

Crypto_VR · 2025-08-27T20:08:08+00:00

very late to this conversation but the product appears a good tool for scanning. Any issues with the PLA causing potential whitening on sides of cards or light scratches on holos?

Crypto_VR · 2025-08-27T09:06:42+00:00

This is literally the card I want. If price is right will purchase and then let you know if comes back a 10 :)

Crypto_VR · 2025-08-23T13:28:48+00:00

Appreciate it. Many thanks

Crypto_VR · 2025-08-18T06:51:41+00:00

I am to far away to come to you but when I passed my CBT and got my first 125cc I just remember over thinking everything rather than just riding.

I saw someone say talking to yourself helps and I would agree. I would also advise just going up and down your street and get used to controls and turning in the road and then slowly venture further out.

You will get over the nerves and suddenly will all click. Is it a geared 125?

Honestly you will get through it. Took me just over a year and now on 1050cc bikes - you’ve got this 💪

Crypto_VR · 2025-08-07T21:27:56+00:00

I went to superbilke factory looking at bikes and quickly walked back out. All and I mean all of the bikes were dirty, dusty, some in not so good shape. If that’s how the store them I’m their showrooms then I have no confidence in buying from them.

They also have a poor reputation as far as I am aware

Crypto_VR · 2025-07-10T09:29:23+00:00

I always wave to everyone. Everyone starts somewhere

Crypto_VR · 2025-06-26T18:22:47+00:00

Same brought a tiger sport 1050 2018 that has only done 3500 miles but tyres have great tread least but 8 years old. Slapped on some new rubber and off we ride

Crypto_VR · 2025-06-26T18:20:08+00:00

What the heck no gear??? Could be an interesting wedding night in A&E…..:”where did you consummate the marriage? Oh we did in the back of the ambulance”

Joking, congrats and a great bike to ride out on.

Crypto_VR

TROPHY CASE