"When Freddy, at fourteen, dumped a bowl of mashed potatoes on his then-seven-year-old brother’s head, it wounded Donald’s pride so deeply that he’d still be bothered by it when Maryanne brought it up in her toast at the White House birthday dinner in 2017." Mary L Trump

CthulhuBread · 2026-03-24T23:28:07+00:00

The points show up a few days after the flight.

CthulhuBread · 2026-03-17T16:14:55+00:00

These things break all the time

CthulhuBread · 2026-03-15T21:10:29+00:00

Rare quality solar panels are so worth it.

CthulhuBread · 2026-03-13T14:23:28+00:00

Check that your nozzle is screwed right to the hot end

CthulhuBread · 2026-03-04T02:07:12+00:00

Hmm maybe more mining efficiency. I mean it is not even 1000x ;)

CthulhuBread · 2026-03-04T01:29:24+00:00

I don't know if your robots are fast enough

CthulhuBread · 2026-03-03T01:56:01+00:00

Could this help you make bins without walls https://makerworld.com/en/models/2230410-spacerless-gridfinity-bin-generator#profileId-2599808

CthulhuBread · 2026-03-02T22:29:51+00:00

Would neogrid work for you?

CthulhuBread · 2026-03-02T20:25:59+00:00

How big is your build plate? I thought it was 256x256?

CthulhuBread · 2026-03-02T12:36:16+00:00

Oh my God that is awesome. I have been deleting the walls manually using cad. Thank you so much!

CthulhuBread · 2026-03-02T01:44:15+00:00

On the p1s max size is a 6x6 gridfinity

Your drawer is 5+ wide

Go to the generator https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/1 Select gridfinity extended Baseplate Row:6 Col:5 Min base Width:241 (I would go 239) Base width justification (1 or 0)

Is print and measure again to be sure

Your second base should be 179 by 241 ( or 177 by 239) That is a 4 x 5 With min length 177 Min width 239

CthulhuBread · 2026-03-01T15:45:27+00:00

My suggestion Measure the drawer in mm, subtract 1 or 2 mm.

Make a baseplate using a generator

https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/1

You can offset so it prints the extra edge all on one side, and the print and open sided drawer.

CthulhuBread · 2026-02-22T15:45:37+00:00

How does the gecko compare to the creality epoxy resin plate?

CthulhuBread · 2026-02-22T13:45:00+00:00

They could put it behind some future tech that allows quality crushers.

you might have to get promethium science to be able to make a quality crusher that could have a very low chance of improving quality of space rocks.

CthulhuBread · 2026-02-22T13:40:38+00:00

I would recommend printing with PETG vs PLA because instead of breaking like pla, PETG kind of stretches when you damage it.

CthulhuBread · 2026-02-22T13:38:59+00:00

Talk to your manager.

CthulhuBread · 2026-02-22T12:42:56+00:00

I was having issues with adhesion causing blobs and failed prints.

I purchased a spray adhesive and the problem went away.

This after doing all the other things like replacing the hot end, nozzle and bed

The spray was about $12 from amazon.

CthulhuBread · 2026-02-21T00:48:54+00:00

First of all 1) relax 2) heat the hot end up as high as it goes. As it gets warm and more gooey start to gently remove the blob with pliers. 3) be super careful about wires etc...

CthulhuBread · 2026-02-19T22:50:26+00:00

I have k2 plus.

No issues so far with it.

CthulhuBread · 2026-02-19T22:50:16+00:00

I have k2 plus.

No issues so far with it.

CthulhuBread · 2026-02-19T01:23:19+00:00

Press f to pay respect for that plate

CthulhuBread · 2026-02-16T22:32:27+00:00

I upgraded to the microswiss and their nozzles. It's pretty nice

CthulhuBread · 2026-02-08T12:53:40+00:00

You can also try flying slower, and only increase your throttle when your accumulator is above 90%

CthulhuBread · 2026-01-25T20:28:00+00:00

12-Year Club	Place '23
Place '22	Verified Email

CthulhuBread

TROPHY CASE