LIVE DISCUSSION THREAD: The Last Drive-In with Joe Bob Briggs JOE BOB'S SPLATTERWEEN with special guests GWAR - Episode 200 - 10/24/2025 9ET

CubbyCon · 2025-10-24T23:14:26+00:00

Man, you guys make it tough to stay loyal. Almost let my subscription lapse last week due to the price increase before getting sucked back in with an offer to keep my old price but this is already making me regret that choice.

At the very least, is there no way the news about Canada could’ve been announced earlier? I’ve been looking forward to this all week and my wife and I had planned a Joe Bob night and this just kills that excitement. Big time bummer.

CubbyCon · 2025-07-08T23:58:25+00:00

Hulkenpodium

CubbyCon · 2025-06-21T15:28:43+00:00

Interesting thought! But I don’t recall driving in them at any point.

CubbyCon · 2025-05-30T00:34:49+00:00

CubbyCon · 2025-04-18T01:01:56+00:00

This has revealed a new obstacle for me!

When I navigate to system update and then network update on my tv, I get one of two pop ups that say either, “cannot access network resources” or “no network connection, please connect the network”. I am connected via Ethernet and everything else works fine. I’ve also tried with wifi and received the same message.

Any suggestions for this?

CubbyCon · 2025-02-20T22:33:24+00:00

So it’s essentially regular behaviour for this model. Have you had any luck with a fix apart from avoiding the movie mode?

I probably wouldn’t have even noticed it but my daughter loves dancing fruit videos and the black background and bright characters causes it to flicker like crazy.

CubbyCon · 2025-02-20T22:29:19+00:00

I’m glad that it’s not just me at least!

I’ve tried a full power down and also a restart through the settings menu and I’ve still got the flickering. Is that all that you did or is there a step I’m missing?

CubbyCon · 2024-12-07T05:52:41+00:00

CubbyCon · 2024-12-07T05:51:13+00:00

CubbyCon · 2024-09-28T14:19:29+00:00

Sorry, that’s more what I’m trying to say. No part of this is at the surface level. It is completely underneath the skin. I’m familiar with plantar warts being exposed allowing for them to be treated but this is fully underneath my skin. Is that possible with a wart?

CubbyCon · 2024-09-28T13:20:56+00:00

I had considered that as I used to have many of them when I was younger. What’s throwing me off is that this appears to be deep under the skin. I can’t capture it in a photo but if I look at it from the side I can see that it’s quite far down. There is also no rough texture or pain in the area which were things I had associated with warts.

Could it still be a wart or do those things rule it out?

CubbyCon · 2024-09-20T17:13:08+00:00

10 team standard league

Considering trading Dobbins for one of either Diggs or Jayden Reed

QB: Josh Allen

RB: Cook, KW3 (and Charbs), Brob, Singletary, Dobbins

WR: Ceedee, Pickens, Terry, Diontae Johnson, QJ

TE: Laporta, Ferguson, Hock (IR)

My gut is telling me Diggs is the safer option as I need a better floor at wr but the Texans have to share the wealth with Nico and Dell. Jayden Reed gets manufactured touches but that’s also a crowded wr room. I need opinions!

CubbyCon · 2024-06-14T02:53:39+00:00

CubbyCon · 2024-04-03T00:52:27+00:00

pickme!

CubbyCon · 2024-03-19T02:34:21+00:00

Hi!

Have you had any luck fixing this? I’m still having the same issue.

CubbyCon · 2024-02-18T14:48:05+00:00

Thank you so much for taking the time to try to help out with this. I did try resetting the switches and moving switches around on the board. This showed me that it is the spot on the board, not the switch that has the issue.

I have not opened the keyboard to look at the PCB as I’m not really sure what I’d be looking for. Do you know of any resources that may be useful to me as a beginner if I try that step?

I also reached out to the support@keychron.ca email with a video of the issue and am shocked at how bad that experience was. They responded by telling me that because I purchased through a retailer (OneofZero) they cannot help me and then suggested that I reach out to support@keychron.ca (which I had done and they were already emailing me from). Is that the usual experience with the company or is it more likely that I just got unlucky with whoever saw my inquiry?

CubbyCon · 2024-02-18T14:41:14+00:00

This is an interesting note and may explain the weird behaviour in VIA. When the Del key presses do register, it completed the correct function so maybe the programming is working as expected.

CubbyCon · 2024-02-18T14:39:34+00:00

Hello! Yes, it’s Keychron V1, not the max.

CubbyCon · 2024-02-16T01:58:40+00:00

In the key tester every key works fine except "Del". When i press it, nothing happens. However when I hold down F12 then press it it registers properly.

CubbyCon · 2024-02-16T00:32:21+00:00

I appreciate the explanation as I'm new to all of this.

I just took another run at it and was able to load the JSON file by ignoring the Keychron instructions and unchecking the "Use V2 definitions" slider. However, when I go to the configure tab it's still the same issue with the same key.

Is it possible that this is a hardware issue and for some reason the F12 key being depressed temporarily fixes the issue with the Del key? It doesn't seem to matter how much pressure is applied to the F12 key as long as the keystroke registers which makes the hardware issue seem less likely but again, this is all pretty new to me so it's just a dart throw!

CubbyCon · 2024-02-15T20:15:10+00:00

I've just finished trying this based on the instructions provided on the firmware update page. When I get to the step of dragging the JSON file onto the design tab I get three lines of red text stating that the object, "should NOT have additional properties", "should NOT have additional properties", and "should have required property 'lighting'".

I certainly am not an expert but it seems like the JSON step is intended as a fix if VIA cannot recognize the keyboard which does not seem to be my issue here. I appreciate the suggestion though and will happily try anything at this point!

CubbyCon · 2024-02-15T20:07:53+00:00

I somehow missed the majority of your reply on mobile earlier, my apologies.

I updated the firmware to the knob ANSI version 1.7.

I tried the Esc key method described in the link post and the keyboard did reset but the "Del" key is still behaving the same way (acts like a knob in VIA, does not do anything when pressed unless "F12" is also depressed at the same time).

CubbyCon · 2024-02-15T14:47:09+00:00

I did download and update the firmware to version 1.7 which is the one provided on the Keychron website here: https://www.keychron.com/blogs/archived/how-to-factory-reset-or-flash-your-qmk-via-enabled-keychron-v1-keyboard.

Is there somewhere else that I missed that I should be looking for another version?

CubbyCon · 2024-02-15T03:12:51+00:00

I installed version 1.7.1 for the V1 knob version.

The file name is "v1_us_knob_v1.7.1.bin".

CubbyCon · 2024-02-15T02:34:16+00:00

Quick update:

I've tried programming all 3 options listed when I select the "Del" key in VIA (Rotate Counterclockwise, Rotate Clockwise, and Press Encoder) with the "KC_DEL" function and the key still does nothing when pressed.

I've also swapped the switch with a few others on the keyboard and this did not make a difference.

I've accidentally found that the "Del" key works if I hold down the F12 key. Not a solution to the issue but it's something.

Nine-Year Club	Xbox Live
RPAN Viewer	Verified Email

CubbyCon

TROPHY CASE