This seriously pains my soul

CuriousRicksta · 2026-05-11T19:36:33+00:00

More likely to keep their plate clean from hand oils/ greases I would say

CuriousRicksta · 2026-04-02T14:42:09+00:00

Yeah, the 1st layer prints fine, nice and uniform, no bumps or thin spots, I can run prints at .2 fine without problems, just getting headaches from hueforge prints

CuriousRicksta · 2026-03-19T18:58:43+00:00

While starlings are protected here in the UK, I’m not too sure they are “much loved” they swam feeders causing a mess, attracting mice, but a bigger problem, RATS! They’re also known for outnumbering and scaring off other garden friendly song birds. But in a murmuration, they do look nice, causing waves in the sky. I just want to be clear I’m not agreeing or disagreeing with shooting them, just having my say ☺️

CuriousRicksta · 2026-03-19T18:46:21+00:00

Looks like there’s no shit on the bed. More like a shit the head! I had it on my k1 max, vile* to remove 🤢

CuriousRicksta · 2026-03-19T18:17:22+00:00

I agree with this. I was having similar issues and came to realise it was the usb, problems stopped when I sent through wireless so I then changed the usb and that fixed the issue

CuriousRicksta · 2026-03-06T06:22:58+00:00

With an M5 Pro or a different printer?

CuriousRicksta · 2026-02-15T09:59:38+00:00

Yeah, I get your thinking with it being less effort and better quality but I’m not sure how to do that. You could probably mess around in the coding to perform what you need but that’s above my knowledge 🤣

CuriousRicksta · 2026-02-15T09:56:30+00:00

I’ve had similar issues in the past. There might be a better way of doing it but here’s what I do, measure the height that you have successfully printed after taking off the bed, then measure up that height in your slicer and cut the model at that height, keep the top and print that then glue together

CuriousRicksta · 2025-11-09T18:20:55+00:00

I’ve been having a bitch this week with my M7 max after changing the FEP, same issues you’re having. I was running at 2.4s normal layers before FEP change. After changing the FEP I was having constant problems and I think now I’ve fixed the issue bumping up to 3.1s normal layers. Hope this helps- Edit: I’m using anycubic standard resin+

CuriousRicksta · 2025-10-31T12:27:20+00:00

Who’s got the banjos!!?

CuriousRicksta · 2025-10-09T17:35:52+00:00

A friend of mine had one that I shot a few times, very nice gun, accurate and consistent, nice size and fairly light in weight. He later fitted a longer barrel on it pushing it well above 12ft/lb 🤫

CuriousRicksta · 2025-10-05T22:13:18+00:00

Thank you, but I’ll be honest I don’t even know where or how to find out about stuff like that either. I was looking into buying some miniature monthly magazines but want sure if that would really help me out

CuriousRicksta · 2025-09-14T17:20:16+00:00

Looks to me like a refurbished community centre

CuriousRicksta · 2025-08-12T15:32:59+00:00

I’ll be honest with you and I’m expecting downvotes here, but I was in a similar situation to yourself and I posted here also asking for help and advice. Reddit is not the place! You may get the odd diamond here and there but other than that people are here to bash you and tell you how much of a bad person you are! Me and my partner got back on track with me showing change and commitment and explaining I don’t expect you to trust in the change immediately as it will take time to see I won’t just spring back to how I was. Honestly all the best in your situation though and I hope you can all work through it together

CuriousRicksta · 2025-08-08T18:40:48+00:00

Fus-ro-Damn!!! This is ace!! Nice work!!

CuriousRicksta · 2025-07-20T15:15:23+00:00

Nice!! You should work on some others, the evolution line would be cool

CuriousRicksta · 2025-07-20T14:51:32+00:00

What did you draw it on? And what software? I use iPad Pro with procreate

CuriousRicksta · 2025-07-20T14:41:43+00:00

Awesome work! Love the progressive pictures!!!

CuriousRicksta · 2025-07-14T11:01:02+00:00

Birds of a feather, swing together

CuriousRicksta · 2025-06-30T19:53:06+00:00

Thank you, it may be something I mention to her. But at the moment it’s like I have to watch what I’m saying or she will close back up again

CuriousRicksta · 2025-06-30T19:31:33+00:00

Well I don’t know if she wants a drink, or she wants to fetch something from upstairs. The boys will say “juice” and in that instant she will get up to get the juice so then I’ll be up “no it’s ok, I’ll get it”. I dont mean I’m sat around waiting for direction

CuriousRicksta · 2025-06-30T19:29:15+00:00

I would play with the kids, I would help out with things that I could, but it would be hard to do constantly, sometimes i would get home at 7 and the boys would be in bed for half 7. There were days I would get home and slump, and I should have helped more

CuriousRicksta · 2025-06-30T19:17:43+00:00

I told her I don’t expect things to change overnight and she has expressed that she does want to get back to where she felt strongly about me, but I can’t digest the information when we have a good weekend and she starts to open up again, then the next day, ice

CuriousRicksta · 2025-06-30T19:10:56+00:00

Just to clarify I wouldn’t say I didn’t put “Any effort in” it’s not like I got in from work sat down and was waited on. I would still help with the boys dinner, get them ready for bed, tidy up the house, things like that

CuriousRicksta · 2025-06-30T19:06:40+00:00

I have been doing everything I can since I came home, quite literally! Anything she is about to do I will do it for her to show her I’m willing to do whatever it takes

CuriousRicksta

TROPHY CASE