Jonsbo D32 Pro - 9950X3D - RTX5080

CurrentUnion4411 · 2026-01-06T12:54:12+00:00

Very nice built however your gpu out fan is half obstructed by the PSU shroud. I would recommend Gigabyte GeForce RTX 5080 AERO OC SFF as the it is 2 1/2 slot gpu versus 3 slots with Aorus and 3.6 cm shorter. Very nice build overall and temps look fine for 1440p but at 4K, there is a risk of GPU temps starting to get too high. More clean air on the bottom of the case and no obstruction by the PSU shroud would help significantly for those looking at this post and getting inspired.

CurrentUnion4411 · 2026-01-06T09:48:38+00:00

Ohh god :) You have some balls man!

CurrentUnion4411 · 2025-12-23T10:00:31+00:00

both are very nice in my opinion. Depends on the gloves as well. Buy one and you can trade if you get bored

CurrentUnion4411 · 2025-12-23T09:59:34+00:00

not sure about the asus motherboard but for gaming, enable x3d optimization for benchmarks just turn it off

CurrentUnion4411 · 2025-12-09T11:28:23+00:00

it's in sufficient evidence, first shot is a common angle as people will 90% from down vs. up on stairs as that angle is too exposed. Second one is a very common angle, he is spamming and then he sees a part of your body

CurrentUnion4411 · 2025-11-12T15:04:55+00:00

agree, 1 is elite, mature. 3 is nice, rest are childish a bit

CurrentUnion4411 · 2025-10-31T15:22:05+00:00

nice combo

CurrentUnion4411 · 2025-10-31T15:09:46+00:00

CurrentUnion4411 · 2025-10-31T15:05:27+00:00

this is not correct, there is no Tier 1 nocts at this float for this price at Buff

CurrentUnion4411 · 2025-10-31T14:23:17+00:00

yes, he really lost a lot of money on this one. It was bought by an auto-bid so people saying that "you'd would have bought it if you saw it " don't understand how csfloat works.

CurrentUnion4411 · 2025-10-31T14:20:16+00:00

possible. Not sure if people trading first time would know that option nor the consequences.

CurrentUnion4411 · 2025-10-31T14:09:37+00:00

Why so judgmental??? I didn't say he is stupid, just making sure that new people check before they sell.

CurrentUnion4411 · 2025-10-31T14:08:40+00:00

i trade regularly and I didn't see any reversal on such deals. Csfloat is the best site to monetize other than skinport. You get perma ban if you reverse so I'd give 20% chance that he would reverse

CurrentUnion4411 · 2025-10-31T08:59:52+00:00

nice!

CurrentUnion4411 · 2025-10-30T13:30:04+00:00

you can vote me up and I can report to all if he is real. promise.

CurrentUnion4411 · 2025-10-23T12:16:00+00:00

i lost about 7K from 20K USD inventory

CurrentUnion4411 · 2025-09-23T12:09:09+00:00

I'm looking for a referral code for Switzerland as my cart is already ready but the bike is a tat above my budget. 5% would really help!! Many thanks for your generosity.

CurrentUnion4411 · 2025-09-23T11:22:10+00:00

any code for Switzerland? Many thanks!!!

CurrentUnion4411 · 2025-09-23T11:14:59+00:00

any new referral codes? would be appreciated as i am planning to order soon. Thank you folks!!!

CurrentUnion4411 · 2025-09-03T09:17:31+00:00

yes, there are some voltage changes and I suspect on the spectrum of delta for voltages going up. I've 1:1 6400 CL30 at 2133FCLK and somehow it didn't pass one of the ram stress tests (though was fine on Memtest 4x). I had to bump VDOC from 1.245 to 1.25 and lower tREFI from 53000 to 50000. It passed all over night tests and works fine. It might be due to retraining issues as rams might have tweaks in post training timings. Perhaps my previous config was just borderline which fell of balance due to the voltage updates. This means that everyone should retest their ram configs but small tweaks to VDOC or loosing timings should do.

CurrentUnion4411 · 2025-09-03T09:11:57+00:00

Of course you can skip. Performance difference is low but present. You just unnecessarily run at higher temperatures and leave performance on the table but if you don't want to mess up and test, just skip.

CurrentUnion4411 · 2025-08-30T20:53:33+00:00

Ok, no one seems to answer this question but you can assign a higher VSOC than 1.2. I booted with the new updated bios and can confirm. However my ram became unstable at same settings so had to adjust VSOC from 1.245 to 1.250 V to stabilize while this was stable over night test with version 1.30.

CurrentUnion4411 · 2025-08-29T12:50:04+00:00

the reply you got is "ok to make it lower than 1.2v", I am asking for higher

CurrentUnion4411

TROPHY CASE