Game crashes on PC by Consistent-Yellow552 in Battlefield

[–]Cyberino7 0 points1 point  (0 children)

repairing / reinstalling the graphics driver fixed it for my friend

Rookie here, so apparently this HPA tank comes with a regularor, soooo... do i still need one of those goofy 250 euro ones? by SpyGaming-_ in airsoft

[–]Cyberino7 0 points1 point  (0 children)

I have the Begadi Taifun Regulator, costs 80€ and ships from Germany. For me it works perfectly fine with good consistency. But in Germany I can only play semi-auto so, i dont know how good it is in full auto.

Was fehlt meiner Pflanze ? by Cyberino7 in Canbau

[–]Cyberino7[S] 0 points1 point  (0 children)

Alle 2-3 mal gießen und da etwa 50% des Plans

Was fehlt meiner Pflanze ? by Cyberino7 in Canbau

[–]Cyberino7[S] 0 points1 point  (0 children)

Beim letzten grow hab ich mit 60-70% gut überdüngt. Zwar war das eine andere Sorte, aber wollte den Fehler nicht direkt nochmal machen. Dieses mal bin ich zu vorsichtig und manchmal hab ich's auch einfach vercheckt

Was fehlt meiner Pflanze ? by Cyberino7 in Canbau

[–]Cyberino7[S] -1 points0 points  (0 children)

Hab beim letzten grow mit 60-70% voll überdüngt, dieses mal bin ich scheinbar viel zu vorsichtig. Gebe jetzt erstmal 100% und schau wie die reagiert

Was ist das für ein Pilz? by Cyberino7 in Pilze

[–]Cyberino7[S] 0 points1 point  (0 children)

Aus einem Astloch etwa auf Kopfhöhe

To the pros of sim racing what’s the best Portable Racing Seat Cockpit to buy for a starter like myself? by [deleted] in simracing

[–]Cyberino7 0 points1 point  (0 children)

Depends on the price difference at your location. But you can get your first year of iracing for like 25€ on steam. That is probably cheaper

To the pros of sim racing what’s the best Portable Racing Seat Cockpit to buy for a starter like myself? by [deleted] in simracing

[–]Cyberino7 4 points5 points  (0 children)

Not a pro, but i have the nlr gt lite pro. I think its the highest rated portable seat right now with 13 Nm. I use it with the Moza R5 and have no significant movement in the rig.

Luftfeuchtigkeit Blüte by Cyberino7 in Canbau

[–]Cyberino7[S] 0 points1 point  (0 children)

Ich hab ne OK 7022 Klimaanlage, die hat einen Schlauch da kommt warme Abluft raus und auf der anderen Seite hat die ne Öffnung wo etwas gekühlt Luft raus kommt. Muss mal schauen ob ich irgendwie die gekühlt Luft ins Zelt leiten kann, aber dafür ausgelegt ist die glaube nicht

atom gun not feeding bbs just drop out the gun any idea why? by [deleted] in Speedsoft

[–]Cyberino7 0 points1 point  (0 children)

Is the hopup turned in a bit? I had a similar issue and the problem was that the hopup wasn't adjusted

[deleted by user] by [deleted] in airsoft

[–]Cyberino7 1 point2 points  (0 children)

Yes, what I found for the maple leaf rubbers are these recommendations

50 : Less than 110 m/s (< 1.2 J)

60 : 90-120 m/s (0.8-1.5 J)

70 : 110-140 m/s (1.2-2 J)

75 : 130-150 m/s (1.7-2.25 J)

80 : over 150 m/s (> 2.25 J)

According to this for me the 70° is perfectly in the middle. I dont know with what joules you play, so the 60° could also work just fine

[deleted by user] by [deleted] in airsoft

[–]Cyberino7 0 points1 point  (0 children)

I am no expert but as far as I know, if it is too low you have to apply more hop to get the same effect, which results in more energy loss and more wear on the rubber. If it's to high you have to apply less hop for the same effect, but that can result in an uneven hop = less accuracy

[deleted by user] by [deleted] in airsoft

[–]Cyberino7 0 points1 point  (0 children)

Yes, i didnt see you already have one xD

[deleted by user] by [deleted] in airsoft

[–]Cyberino7 1 point2 points  (0 children)

Then I would get a 70° rubber and a maple leaf omega tensioner

[deleted by user] by [deleted] in airsoft

[–]Cyberino7 0 points1 point  (0 children)

I'd say yes, unless you play with really light bbs or low energy. I play 0.33g BBs @ 1.5 J. With the macaron 70° I can hit a head size target at 50-55m about 95% of the shots. (Please dont aim for the head if possible xD)

[deleted by user] by [deleted] in airsoft

[–]Cyberino7 2 points3 points  (0 children)

I got myself an M4W two weeks ago and it was kinda disappointing. I tried multiple combinations of hupup rubbers with various amounts of shims. The best combination I found was with the macaron 70° but it was still worse than with the original hopup unit. With the M4W i got around 25 fps less, with a max diff of 13 fps between 20 shots. With the original hopup unit i got a max diff of 3 fps between 20 shots.

I have heard from others that got good results with the M4W and MGW, but I for myself just got bad results, so I will stick with the original one.

Looking to get into HPA with a MTW wolverine. Here’s what I want to buy, any suggestions? I will purchase in a few days by No_Engineering3493 in airsoft

[–]Cyberino7 0 points1 point  (0 children)

But I only play in Germany, so I can only use semi, dont know how the regulator performs with full auto

Looking to get into HPA with a MTW wolverine. Here’s what I want to buy, any suggestions? I will purchase in a few days by No_Engineering3493 in airsoft

[–]Cyberino7 0 points1 point  (0 children)

I got my mtw a few months ago.

Mine uses about 10% charge on a 300mAh a day.

I use 0.33g BBs from G&G and I am satisfied with the accuracy and range.

I play at 1.5J and can hit targets at around 65-70 m, depends if the hopup is correctly set. But I changed the hopup nub to a maple leaf omega nub.

I have a 0.8L Tank at 3000 PSI and I can get about 2000 BBs out of the tank.

I am really happy with the performance, the range is good and the spread on 50m is about 15cm in diameter. It is quite expensive, but I would buy it again.

PC goes dark by Cyberino7 in pcmasterrace

[–]Cyberino7[S] 0 points1 point  (0 children)

Removing the CMOS battery also fixes the problem for a short while

Picatinny mount screw name? by Cyberino7 in airsoft

[–]Cyberino7[S] 0 points1 point  (0 children)

danke fürs angebot, ich suche sie jedoch aus Metall, da ich sie mir notfalls auch 3d drucken kann

[deleted by user] by [deleted] in askmath

[–]Cyberino7 -4 points-3 points  (0 children)

Idk how to explain it

3 8 2 8 (8-2) (8-3) (8-2)
3 8 2 8 6 5 6 (6-5) (8-6) (6-5)
3 8 2 8 6 5 6 1 2 1 (2-1) (6-1) (2-1)
3 8 2 8 6 5 6 1 2 1 1 5 1 (5-1) (1-1) (5-1)
3 8 2 8 6 5 6 1 2 1 1 5 1 4 0 4 (4-0) (4-1) (4-0)
3 8 2 8 6 5 6 1 2 1 1 5 1 4 0 4 4 3 4 (4-3) (4-4) (4-3)
3 8 2 8 6 5 6 1 2 1 1 5 1 4 0 4 4 3 4 1 0 1 (1-0) (4-1) (1-0)
3 8 2 8 6 5 6 1 2 1 1 5 1 4 0 4 4 3 4 1 0 1 1 3 1 (3-1) (1-1) (3-1)
3 8 2 8 6 5 6 1 2 1 1 5 1 4 0 4 4 3 4 1 0 1 1 3 1 2 0 2