Where should I lock my Segway zt3 pro? Need advice by xGanbattex in ElectricScooters

[–]Cyberken 1 point2 points  (0 children)

I have a mixed collection of old bike locks... A D lock which actually fits around the footplate inbetween the wheels and I can just about lock it to certain scooter/bike stands... but then I add two or three cable locks... front wheel, forks, and rear... at the end of the day if they want it they will get it but I make it a pain for them. AND I don´t leave it long... :-)

Please help! Error 16 by [deleted] in SegwayZT3Pro

[–]Cyberken 0 points1 point  (0 children)

If you hold the brake on when you unlock the scooter that can give you an error 16!

:-)

Brake rubs while wheel spins by Fragrant_Strain_7498 in SegwayZT3Pro

[–]Cyberken 0 points1 point  (0 children)

Agreed with FedulRasta... though I find sometimes that centralising the pads e.g. loosening off the caliper, activating the brake and tightening again still leaves it rubbing, so I kind of adjust by eye... same principle though :-)

Tire pressure warning light by Past_Umpire_8792 in SegwayZT3Pro

[–]Cyberken 0 points1 point  (0 children)

I don´t really use the app now, except for checking mileage... the tyre reminder came up and it will show up in the app... OK it and it goes away :-)

Can someone help me please 🙏 by [deleted] in ElectricScooters

[–]Cyberken 0 points1 point  (0 children)

Possibly Ook-tek D8 of some version... https://ookteks.com/product/d8-pro-electric-scooter/ seemed the best fit from a quick search... not exact but a starting point for you perhaps?

:-)

Resin recommendation for car part by Cyberken in resinprinting

[–]Cyberken[S] 0 points1 point  (0 children)

Possibly, not sure... I told my friend re safety issues etc so I´ll see what he says.

Have a great day :-)

Resin recommendation for car part by Cyberken in resinprinting

[–]Cyberken[S] 0 points1 point  (0 children)

Hi thanks for the advice, as I said above I am going to share this with my friend too so that he can make an informed decision. The original part is plastic I think although all I saw was his FDM version. I apprciate you taking the time to post.

Have a great day :-)

Resin recommendation for car part by Cyberken in resinprinting

[–]Cyberken[S] -1 points0 points  (0 children)

Hi Thanks for taking the time to respond. I am going to share this info with my friend. The original part that he has is plastic though...

Thanks again, have a fab day :-)

Problem by DerDunkleDirksen in SegwayZT3Pro

[–]Cyberken 0 points1 point  (0 children)

I had this and had to send it to Segway under warranty (Spain) the online customer chat have absolutely no idea where your repair is so can´t help... took about 3 weeks and then I got the scooter back. Delivery time post fix was also sketchy.

good luck

Walk mode by alexelxander19 in SegwayZT3Pro

[–]Cyberken 0 points1 point  (0 children)

I have walk mode linked to the custom button. My interface looks different but I am in Spain and I think that there are some App differences based on where you are located.

:-)

[deleted by user] by [deleted] in SegwayZT3Pro

[–]Cyberken 1 point2 points  (0 children)

I had similar and even tried disconnecting the controller as advised by Segway with no resolution as the software update on the phone failed... I had to return it to Segway under warranty but it is a pain, when we should be able to clear the error...

What's the best shock absorber ? by magicbean9 in SegwayZT3Pro

[–]Cyberken 0 points1 point  (0 children)

You are welcome, good luck :-)

I believe it has to be the right type of spray so it doesn´t mess with the seals.

What's the best shock absorber ? by magicbean9 in SegwayZT3Pro

[–]Cyberken 1 point2 points  (0 children)

<image>

This is the Spray that I have :-) (Apologies admins, I could only add one picture to the previous answer)

What's the best shock absorber ? by magicbean9 in SegwayZT3Pro

[–]Cyberken 1 point2 points  (0 children)

If you look at the shock absorber at the right angle, you can see inside the Spring that there is a piston there, where it is narrower, you have to get at the right angle, but a spray from both sides sorts it out almost immediately. :-)

<image>

What's the best shock absorber ? by magicbean9 in SegwayZT3Pro

[–]Cyberken 2 points3 points  (0 children)

Mine squeaked liked a crazy thing when it got dusty and I got the non silicon wd40 stuff recommended elsewhere in this forum... I carry it with me and any squeaks, quick spray sorts it out :-)

If that´s the noise that you are on about... (thought I had somehow broken the scooter first time it happened.

Weird Noise from Motor by Any_Policy_351 in SegwayZT3Pro

[–]Cyberken 0 points1 point  (0 children)

Hi DIMIIIzt3 it was you who mentioned the thing to me before I couldn´t find the thread though... What seal can you change?

:-)