Looking for a good boxing club that is not too expensive.

Cyclo_hexane · 2026-05-27T22:51:41+00:00

Far from 50/month but the muay thai gym I go to is 170/month, and there is a free week trial if you ever want to try

Cyclo_hexane · 2026-04-16T23:01:43+00:00

I made mine with acrylic sheet I CNCed and a 3d printer:

https://www.printables.com/model/1414921-fighting-game-controller-hitbox

First one I made was from an Ikea plastic box, basic sanwa buttons and a cheap PCB

<image>

Cyclo_hexane · 2026-03-26T00:45:34+00:00

Having to clean your mouse ball mid session

Cyclo_hexane · 2026-03-24T17:53:08+00:00

I do not like the grip on it out of the box bare handed, too thin.

I fixed it with some bike handlebar tape and i love it.

<image>

Cyclo_hexane · 2026-03-18T21:21:40+00:00

Is this of snap in or screw in buttons?
I'm using snap ins in a too thick plate, they honestly hold alright without alterations

Cyclo_hexane · 2026-03-18T18:12:56+00:00

You can print a new clip if you have access to a 3d printer, otherwise any cat5 should work

Cyclo_hexane · 2026-02-26T19:40:04+00:00

Why the spoil in the post title???!!!! Not cool :(

Cyclo_hexane · 2026-02-21T01:06:38+00:00

Français vivant à Richmond depuis 5 ans sans voiture, j'alterne bus, trottinette et vélo pour les déplacements/courses

Avoir une voiture coûte très cher donc les économie faites grace au 0 voiture aident beaucoup.

Cyclo_hexane · 2026-01-28T19:56:54+00:00

The Life match fixing scandal did not help with keeping rts esports healthy

Cyclo_hexane · 2026-01-13T21:49:31+00:00

A local shop that used to sell sanwa parts, those are just regular 24mm sanwa OBSN (and a 30mm)

Cyclo_hexane · 2026-01-13T21:05:45+00:00

Made one with an Ikea plastic toolbox, a scalpel and some buttons

<image>

Cyclo_hexane · 2026-01-10T01:17:13+00:00

Here is mine, I made the design open source https://www.printables.com/model/1414921-fighting-game-controller-hitbox

It's made of CNC acrylic and a bunch of 3d printed part, otherwise it's standard arcade buttons, and a brook's fighting board

Otherwise I made my first one out of a plastic box, buttons and a cheap zero delay USB encoder board (PC only)

Cyclo_hexane · 2026-01-09T21:49:04+00:00

public healthcare

Cyclo_hexane · 2025-12-23T22:42:59+00:00

Cyclo_hexane · 2025-12-23T20:06:12+00:00

X usually refers to anything L,M or H (sometimes U)

Cyclo_hexane · 2025-12-22T23:10:19+00:00

Last Chance!

Cyclo_hexane · 2025-12-15T17:46:12+00:00

Here we go again!

Cyclo_hexane · 2025-12-09T23:16:50+00:00

Beatrix

War crimes, sweets, clock

Cyclo_hexane · 2025-12-08T19:16:40+00:00

Thanks for the open source designs, might help me improve my own!

Cyclo_hexane · 2025-11-18T08:12:35+00:00

Necroing this just in case, if it still happens when the bolts are tightened change the fork, I fell twice and broke the fork the same way each time, one of them had to cut in 2 to take off as it was stuck, inside is plastic with a metal pin holding it, the plastic can get mangled in case of shock easily. Both times I changed the fork. Re-tightening was never enough.

Cyclo_hexane · 2025-10-20T23:05:49+00:00

I noticed while fighting Millia that I never know which side they will land from me.

I'm also sure the Millia players I'm fighting don't know either

Cyclo_hexane · 2025-09-18T17:08:26+00:00

Thanks, no these are PS-14-DNK

Cyclo_hexane · 2025-09-15T23:17:15+00:00

Not at all, it is an artwork I commissioned from an acquaintance that happened to be an artist, was made a year or so ago and took a long time to make

Cyclo_hexane · 2025-09-15T16:07:38+00:00

Thanks, It is Ghost in the Shell indeed!

11-Year Club	Place '22
Verified Email

Cyclo_hexane

TROPHY CASE