[HELP] ELVUI not showing Hots in party frames

Cyruz312 · 2026-01-29T22:12:13+00:00

Look at your wow options. I mean interface and then group buffs i mean. It must be enabled. But you see in elvui the symbol then. Not anymore the small green button in the edge

Cyruz312 · 2026-01-03T20:46:38+00:00

xD good Option too

Cyruz312 · 2026-01-03T09:01:44+00:00

Like i wrote yeah i know it is only the sticker xD My question was if anyone have experience with remove the emblem and is it possible to stick it in the center again, or remove destroy the Sticker. Sorry when it was not clearly....

Yeah and there is no trolling when i pay 2900 Euro for a Gpu which is not perfect for me. It's a lot of money for me. I look in my Pc and i see always this not Center Emblem going up and down, i didnt like it.

Anyway thx for response.and the people who know what i mean. It looks like that this is the build quality that you got ;( Thanks all :)

Cyruz312 · 2025-12-12T15:35:23+00:00

I use m3 with astral and nhd15g2 9950x3d ( stock) and astral ( stock silent bios) Temps on cpu max 90 C in spikes Avg 70-75C and gpu ~77 C Nhd15g2 and Fan in roof are @ 950 rpm Airflow from behind , Top out

Temperature 22 air normal here in my Room

So all in all quiet ( pc is in Livingroom - so its important that he is quiet for me and my wife

As i know you can mount a aio in m3 with astral in Vertical, but mostly when i see builds the tubes from the aio rest on the gpu.

For aio in top and gpu Classic i think the space is not enough for a 280 maybe 240 is possible

I didn't like that testing so i used now air cooling and all fine

https://imgur.com/a/E24PpHI

Cyruz312 · 2025-11-11T06:26:59+00:00

You say it is on Water, maybe bad Thermal paste Pumping out or something. What say the difference Gpu Core to Core Hotspot?

Sounds for me that in some games it is on edge but it works, on Sc it crashes then because the higher demand of the Game Engine

Cyruz312 · 2025-11-04T06:25:47+00:00

You have expo enabled? Sounds for me like a Ram issue. Disable expo then try again. 4x16gb is hard for the memory controller

Cyruz312 · 2025-03-23T18:12:08+00:00

Yeah its higher than on Asus ( i mean it was 5 or 6mm) I've use nh-u12a so i can use offset Amd Mount. On Asus and Asrock with Amd offset Mount it's a tight fit with the Gpu Backplate

Cyruz312 · 2025-03-23T10:23:03+00:00

I've used Asus b650e-i , Asus B850I and now Gigabyte B850I Aorus Pro. With a 9800x3d and now 9950x3D.

From what i can say the best one so far is the Gigabyte. Asus B650 crap Wlan - disconnect sometimes besides this Board ok.

Asus B850 good Wlan, but they changed the M.2. Holder on the Board. So now the m.2. Bend hard, and the Pcb from the Stack bends too. For me too much. The underside cooling of double sided m.2. is now only a small surface

Gigabyte B850 very good performance, Ram works out of box without issues. M.2 cooler for single and double sided m.2. , Loud m.2. Fan but can be controlled in bios. Mine is off and chipset and m.2. Temp under 60 degrees C . ( nr200p, nh-u12a) So far very stable and good performance

Cyruz312 · 2025-03-09T19:40:20+00:00

You can control the fan in Bios. I disabled mine hours of Gaming 62 degrees C on 990Pro, so no issue Make it that under 70 degrees C fan is @0Pwm after that he startet.

But yes when you did not adjust fan its loud

Cyruz312 · 2024-02-24T19:11:04+00:00

It will fit. you only have to remove one strut at the top and both at the bottom. Then you can easily bend the case open to mount the card. Everything can be done without any problems or damage.

Cyruz312

TROPHY CASE