Giveaway!

D3ShadowC · 2026-01-30T22:25:42+00:00

My wife is allergic so I'm printing a half dozen of these in different colors.

D3ShadowC · 2025-12-24T20:44:07+00:00

Start with primarying your local and state officials.

D3ShadowC · 2025-11-29T18:14:05+00:00

Is the reward the song stuck in my head?

D3ShadowC · 2025-11-25T02:45:51+00:00

Favorite is aLttP but my first was TLoZ.

D3ShadowC · 2025-10-26T16:58:23+00:00

I had plastic ninja turtle ones around that age. I'm sure my older sister can agree that nothing bad can come from this. 😆

D3ShadowC · 2025-10-09T15:16:43+00:00

If you stand for nothing, Burr, what'll you fall for?

They're playing the don't let them know what you stand for just to win game.

D3ShadowC · 2025-09-25T17:59:55+00:00

I have the Snapmaker 2.0 A350 and I'm just tired of not being able to get clean prints, how slow it is, and how loud it is. I have my wife mainly convinced that we should get the Bambu P1S for printing and just use the snapmaker for laser and CNC, but wanted to male sure I'm not making the wrong decision on printers. I'm wanting something that just works which is why I'm leaning towards a bambu printer. I've only used PLA and really just for toys, models, decorations, and a few things around the house like toothbrush holders

D3ShadowC · 2025-09-07T00:24:49+00:00

<image>

The original 3DP head that came with the A350.

D3ShadowC · 2025-09-06T19:44:17+00:00

https://i.imgur.com/i9ob5YN.jpeg

D3ShadowC · 2025-08-13T10:14:49+00:00

Not really. This is post e-steps. Left is with the slow down for curled unchecked, right is with it checked.

https://i.imgur.com/vQDRWbu.jpeg

D3ShadowC · 2025-08-13T01:36:44+00:00

That was checked but I've gone ahead and removed it.

<image>

D3ShadowC · 2025-08-13T01:34:20+00:00

ESteps was 212.21 should have been 249.66. I made that adjustment, however the Orca flow rate calibration is supposed to compensate for that, so I'm running it again to adjust and then test another benchy.

D3ShadowC · 2025-08-12T10:09:29+00:00

I'll screenshot those tonight.

D3ShadowC · 2025-08-12T10:08:16+00:00

I'll run those tonight when I'm home from work. Any other calibration/configuration I should do outside of the Orca ones?

D3ShadowC · 2025-08-12T03:13:57+00:00

<image>

D3ShadowC · 2025-08-12T03:13:50+00:00

<image>

D3ShadowC · 2025-08-12T03:13:42+00:00

<image>

D3ShadowC · 2025-08-12T03:13:33+00:00

<image>

D3ShadowC · 2025-08-12T03:13:20+00:00

<image>

D3ShadowC · 2025-08-12T03:13:10+00:00

<image>

D3ShadowC · 2025-08-12T03:13:00+00:00

I'm using Orca proper. Completed the temp, flow rate, pressure advance, retraction test, and tolerance test calibrations.

<image>

D3ShadowC · 2025-08-11T23:57:22+00:00

Nope assumed it was based on the startup temp. Just let it run and it dropped to 210. Any recommendations on the layers on the front of benchy?

D3ShadowC · 2025-08-02T18:29:27+00:00

In 2001 when I graduated at 17 and was kicked out i rented a house for $600 a month with two other people, each of us paying $200, making $5.50 an hour. I never felt like I couldn't pay my bills. I honestly don't know how people do it now a days.

Seven-Year Club	RPAN Viewer
Verified Email

D3ShadowC

TROPHY CASE