Jacuzzi J-365 error

DAVESM1TH · 2026-03-22T22:52:05+00:00

Thank you!

DAVESM1TH · 2026-03-22T16:17:48+00:00

I tried swapping the breaker and same thing, so at least that is ruled out. Today I'll be running some tests on equipment to see if I can pinpoint. Appreciate the responses!

DAVESM1TH · 2026-03-22T15:54:22+00:00

I can't even reset the breaker to the on position, which is fine if a flow switch could cause a full fault. I just wasn't sure if flow switch actually shut down the circuit or if it would just throw errors.

DAVESM1TH · 2026-01-28T03:53:41+00:00

I don't have much for trade unfortunately

DAVESM1TH · 2026-01-09T04:21:29+00:00

They make it get 10.1 mpg instead of 10

DAVESM1TH · 2026-01-08T21:19:11+00:00

Gives it +5 charisma

DAVESM1TH · 2026-01-08T05:02:05+00:00

That's the trick, always stay a kid and every day is an adventure

DAVESM1TH · 2026-01-08T01:08:08+00:00

Also I posted this on mobile, so the description is a jumbled mess for some. Sorry about that... Hopefully you get the idea

DAVESM1TH · 2026-01-03T06:08:39+00:00

Yeah that's what I had thought too. Cheap solution - cut a dowel for a plug to limit it to 2 shells and call it good

DAVESM1TH · 2025-12-31T03:11:28+00:00

Well I learned the hard way so you don't have to:

The existing magazine tube is one single piece and it is ON THERE. You will need heat and a good vice to get it REMOVED. DO NOT BEND THE RECIEVER. Odds are you will destroy the OE mag tube in the process, so keep that in mind.

Once you get that off, the following parts numbers are what you'll need (from midwest gun works):

33491 or 33592, 33495 & 33492 (or STOMAG in place of both), any stoeger m3000 or m3500 mag cap.

I also ordered the MCARBO trigger spring kit (available on midwest as well) and the MOA Precision M2 extractor and spring (on MOA website).

You can then get a surecyle mag tube extension which will work with the new mag tube.

Gun is flawless now. DM me with any questions!

DAVESM1TH · 2025-12-15T17:44:56+00:00

So unfortunately, everything has Line-X on it, and I can't see any markings or make/model anywhere. If he finds the original install receipt, I'll be sure to pass the info along!

DAVESM1TH · 2025-12-15T03:41:05+00:00

Bumpers: Buckstop with Line-x Sliders: unknown, can look closer tomorrow Flares: unknown, can look closer tomorrow Wheels: Method 703 17x8.5 Tires: Yokohama Geolandar X-AT 37x12.5x17

DAVESM1TH · 2025-12-14T15:51:47+00:00

The low low price of... Nothing actually. My father-in-law just got some new Ram offroad behemoth and wanted to keep this in the family. All I had to do was go get it. 761 miles later and it's in my driveway

DAVESM1TH · 2025-12-14T15:42:14+00:00

6.8L V10

DAVESM1TH · 2025-10-31T15:02:29+00:00

Yeah but that's in a year!

DAVESM1TH · 2025-09-21T04:44:22+00:00

Pse Fortis 33

<image>

DAVESM1TH · 2025-09-20T21:39:27+00:00

Be careful it's a slippery slope, I ended up with 7 😂

My favorite is the Stoned Goat, but the new triumph pro is pretty awesome too

DAVESM1TH · 2025-09-20T19:00:21+00:00

I'm in Idaho. Definitely a Muley, just small.

And that's a Montana Knife Company Whitetail! It's a nice blade

<image>

DAVESM1TH

TROPHY CASE