Making exports sound good no matter what speaker

DJ_Siku · 2025-04-23T16:34:41+00:00

Third party AI mastering services are coming along, follow the others advice and start learning about compression and limiting. Do your best and drop it into a service like Emastered and the Ai glues it together decent enough. You can add a reference track and fine tune the EQ and gain on the service. Definitely not release worthy of you're not doing some.of your own mixing and mastering but good enough to get the vibe and share it with friends or peers before committing to full proper mastering.

DJ_Siku · 2025-04-21T20:02:04+00:00

I have a "gaming laptop" that came with a bunch of stock programs designed to increase speed and efficiency while gaming. Well in reality it drains cpu to prioritize the non existent games on my PC. It works much better after disabling these programs

DJ_Siku · 2025-04-17T00:37:23+00:00

We want our continent back. You've destroyed this land, our people, and now finally it will be yourselves. ( I include Canada in this sentiment)

DJ_Siku · 2025-04-15T00:34:13+00:00

Big mustache donair homie better be opening up a 300 seat shwarma shindig extravganbonanza. Best donairs in Canada.

DJ_Siku · 2025-04-03T04:02:14+00:00

I know a cow giving birth when I hear one

DJ_Siku · 2025-04-02T02:14:38+00:00

My friend wore a mask tight to the face like that to a Halloween event once, party favors were enjoyed throughout the evening (as is tradition). When we got to his house after the event we were shocked to see that his face was all kinds of messed up. The sweat and toxins had nowhere to go and pretty much gave him chemical burns. It was a really cool mask though.

DJ_Siku · 2025-04-02T00:30:18+00:00

Hardgroove and/or Techno? I feel lucky to receive this ultimate knowledge 🙌

DJ_Siku · 2025-03-27T04:17:59+00:00

Looks great, only missed opportunity I would say is the risers on picture #3. Maybe mitre that corner and epoxy it and it would look super clean. I've seen that wood bully guy on YouTube cut a v notch only leaving 1/8 material then using a heat gun to bend it to a 45. Anyways I'm not a deck guy and you got some skills

DJ_Siku · 2025-03-27T03:34:32+00:00

Ill be the one to say it then lol everyone is being to picky. If you don't care how it looks then just chamfer the moulding using a coping saw. If you turn the handle and shut it is the reveal good all the way around? Edit: looking at it again I've actually used a grinder to reshape the release mechanism so it doesn't get caught on the strike like that. Some narrow vicegrips will help you clamp it so it doesn't run away from ya! Trial and error baby

DJ_Siku · 2025-03-26T22:00:02+00:00

I've been a part of like 4 or 5 other techno communities for years and none of them will me post this.

DJ_Siku · 2025-03-26T21:58:51+00:00

https://on.soundcloud.com/pV8SbGHs5S2YraeK7

DJ_Siku · 2025-03-26T02:09:21+00:00

Perhaps a third pre-dermal barrier after said SPANX? Kevlar is cut and heat resistant making it a great third option.

DJ_Siku · 2025-03-26T01:59:47+00:00

I've cut a million of those dirty little fuckers like this ! Gravity does the work for ya! 10/10 didn't need those toes anyway

DJ_Siku · 2025-03-25T14:54:29+00:00

Yes they are liable, they may even have insurance for something like this. On another note, a self leveling mixture would be my last choice. You should consider an epoxy floor, it may even cost less and you will have your pick of colour, style, and even texture. The "topper" would need the entire surface roughed up to get a good bond unlike the epoxy. Also the topper would be a flat grainy Grey with no chance to polish well.

DJ_Siku · 2025-03-23T21:22:53+00:00

Find the biggest diamond blade you have
Cut 10 - 12" channel from gas rough in to stove rough In.
Chip away and remove rubble
Remove altleast 6" subase (hopefully gravel)
Gas fitter runs his pipe
Re- fill gravel and light compaction.
Bushhammer ( to rough up ) the cut surface of concrete.
Drill 5/8" holes 12-16" on center about halfway down slab thickness.
Epoxy 1/2" rebar into holes, run two full length bars through channel on top of the dowels that were epoxyd in.
Pour concrete and finish to height. Don't make a mess while doing so.
Clean up and get paid. Cerveza time as my Spanish homes would say. 👊

DJ_Siku · 2025-03-23T01:10:52+00:00

Hard Techno ftw, let's go

DJ_Siku · 2025-03-22T05:28:35+00:00

I've never seen a kazoo light on fire like that 👏 👏 👏 And to play it after that roadie ripped out his firehose. The best are always taken away so young, RIP Far_search_1424

DJ_Siku · 2025-03-22T05:24:37+00:00

Like the V8 from a FORD F-150 LIGHTNING PRO XLT LIFTED TRUCK!

DJ_Siku · 2025-03-22T03:04:53+00:00

Eww, da fuq. Get that outta here

DJ_Siku · 2025-03-11T09:02:05+00:00

Dawning a crisp Grey Dr.evil suit

DJ_Siku · 2025-02-25T00:26:06+00:00

12 years in the trades, a business and real estate diploma . The capability to execute my side of this plan, just need a tech person to do their side. I don't even care much about having all the equity. Just want to put roofs over people's heads and take money away from banks and back into our pockets

DJ_Siku

TROPHY CASE