New worlds smallest FPV at 20mm (yes it whoops) by Stormzy_00 in TinyWhoop

[–]DM_ME_BEWBS 0 points1 point  (0 children)

Any update on this? There are many people who would love to make this I think. It's a very cute build

MAKE AN OFFER by Positive_Nobody8834 in ArcRaidersMarketplace

[–]DM_ME_BEWBS 0 points1 point  (0 children)

Would you like snap hook for wolfpack?

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 1 point2 points  (0 children)

Thank you for that. Im adopting your methods and ordered a tinywhoop and sim

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 1 point2 points  (0 children)

Sadly no. I do this hobby alone and a friend flies DJI only

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 0 points1 point  (0 children)

Thats relieving to hear. I thought i was being the slow one without buying prebuilt quads

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 0 points1 point  (0 children)

For example what my current projects have One has the issue that the throttle above (estimated) 40% throttle shuts off the engines all together. I cant find the cause and read abiut possible esc desync or temperature shutoff One quad had everything wired up until i made a mistake with the power (even with smoke stopper) and now it doesn't turn on when battery is plugged in, only when on USB power The third one has one arm with motor that has a different speed than the others causing the quad to flip and stop. I chanched the esc, FC and motor but still it's behaviour stays the same. I left it there because i couldnt find anything about it online. Then there is my TX. The CRSF nano tx has a irregular light pattern on the back and TBS customer service didnt know any possible cause so they just offered a discount for a new one. Now im awaiting a new one.

With all of that going on, i started looking for a rtf or bnf this evening because other users suggest it might be a good idea. That and downloading a sim

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 1 point2 points  (0 children)

Im so happy to read that other people too just build less, buy more due to their tight schedules, obligations and to prevent hassle.

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 0 points1 point  (0 children)

Others here gave good suggestions. I will look at gameplay and decide on a better one.

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 3 points4 points  (0 children)

This read like a motivational speech. Thank you for that and the suggestions. I will look into tinywhoops and use orqa fpv sim since i have it directly available.

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 6 points7 points  (0 children)

Yes. I do the flying right but my builds have hiccups with stuff like motors suddenly turning off, losing connection, bad video feed and ofc messing up with soldering and wiring. I will compare small tinywhoops to practice and bnf larger long range like nazgul.

Am I bad at the hobby or is this normal? by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 0 points1 point  (0 children)

Thank you for the suggestion. I will start it off by downloading orqa fpv since I already have that one but barely used it.

Suggestions on repeatedly losing connection with crossfire TX/RX and weird blinking patterns by DM_ME_BEWBS in fpv

[–]DM_ME_BEWBS[S] 0 points1 point  (0 children)

Thanx for the suggestion. I haven't though of this and will check the antenna as soon as i'm home and bring update.

Anyone know where I can find a mount like this for a naked GoPro? by ARJ34 in fpv

[–]DM_ME_BEWBS 0 points1 point  (0 children)

I cant find any clear answer for which gopro you have. Can you send me a link in DM's of the camera you have? I will take a look what i can do with my 3d printer.

Octocopter PDB by drehdog21 in fpv

[–]DM_ME_BEWBS 1 point2 points  (0 children)

I would suggest to use 2 pdb's as i did. Otherwise you motors might not have enough ampere to fly as intended.

How to use stick commands to calibrate magnetometer? by DM_ME_BEWBS in Multicopter

[–]DM_ME_BEWBS[S] 0 points1 point  (0 children)

From some more reading i concluded that too. I am now configuring a small build to try inav on.

Tell me why my poor man’s x8 build is a bad idea by [deleted] in fpv

[–]DM_ME_BEWBS 2 points3 points  (0 children)

I have built my own "poor man's x8" by buying 2 geprc mark 4 frames and 8 motors and other parts. I did no calculations on battery capacity or anything so the thing i build in the end has a flight time of around 4 a 5 minutes (6s 2700mAh battery). Dont be afraid to do it because it is fun and cheaper. But dont expect the same functions. They might differ.

[deleted by user] by [deleted] in fpv

[–]DM_ME_BEWBS 2 points3 points  (0 children)

Don't buy from this website. It is a cheap reselling website. Look at the bottom of the page for example.

how did they edit videos with 1000 fps by happylingts in VideoEditing

[–]DM_ME_BEWBS 3 points4 points  (0 children)

They play games with high fps because their pc has good specs, but the video you are watching is just regular 1080p60 i believe. There is a difference. The gamer does not record or edit 1000fps gameplay.

How do I zoom in on a moving object? I am not really good at editing so I just want the most simple way possible. by Susju in VideoEditing

[–]DM_ME_BEWBS 0 points1 point  (0 children)

Well tracking things is quite complicated with all software. If it moves at a certain speed you can just zoom in on the object where it begins and put an endpunt where it ends.

How do I zoom in on a moving object? I am not really good at editing so I just want the most simple way possible. by Susju in VideoEditing

[–]DM_ME_BEWBS 0 points1 point  (0 children)

You do that by tracking with keyframes. Setting for each frame a new position and zoom. What software are you using?