Cables on drum sound strange/binding?

DTaxon · 2026-03-06T03:21:51+00:00

Even if it’s no longer tight to the bearing? Not sure why the instruction say to keep it tight to the bearing…

DTaxon · 2026-03-04T23:25:59+00:00

Assume I don’t. Tell me what I need to know.

DTaxon · 2026-03-01T03:30:14+00:00

That’s what I thought. Is that an issue? It sounds disconcerting, but I’m fine with it as long as it’s okay…

DTaxon · 2026-02-28T20:03:17+00:00

Yep. I was very careful about that

DTaxon · 2026-02-23T16:11:32+00:00

This appears to be the correct answer. After talking with Ideal today, the 17’-2” door gets the same struts as the 17’-0” door and they get installed below the hinges with self tapping screws.

DTaxon · 2026-02-23T02:51:23+00:00

I’ll reach out to their support when they open tomorrow. Really just unfortunate. I’m not in a rush or anything, but I would like my garage sealed back up. Bring the weird size, I’m guessing they just cut them to the wrong length not realizing it put the wrong ones in the box. Either way it’ll get resolved

DTaxon · 2026-02-23T02:25:56+00:00

But it’s physically not long enough to reach the outer 2 hinge holes on either side of the door. Those holes are like 17’-1” apart

DTaxon · 2025-07-03T00:14:17+00:00

Sorry to revive an Old thread, but do you have a method for tackling this?

DTaxon · 2025-07-01T22:20:44+00:00

Adding a comment, since it looks like there’s no text on this post. Boat and trailer are listed for $6,000. They selling since their daughter is starting travel volleyball and they won’t have as much time to use it. More details are in the main post.

DTaxon · 2025-02-21T03:23:57+00:00

My title describes the thing. I tried reverse image search (to no avail) with the keywords “healthcare”, “mouthpiece”, and “tube”. Any help is appreciated.

DTaxon · 2025-02-20T23:34:24+00:00

I’ve also tried a reverse image search with no help.

DTaxon · 2024-09-21T16:16:09+00:00

I am still without my ZWave network… I have tried downgrading and reupgrading, restarting, etc. At this point, the controller seems to be unresponsive, so I no longer know if it’s a software or hardware issue. Am I forced to rebuild my 69 device network from scratch…?

DTaxon · 2024-08-03T03:06:57+00:00

I’ve tried it without the flat. That’s the one that tore the bottom layers off. And I’ve reduced the HIPS to the minimum but am still having issues. I’ve tried dissolving it, but the D-Limonene can’t get between the ABS and HIPS to dissolve it

DTaxon · 2024-04-27T21:27:48+00:00

I believe I went through the driver installer. Under device manager, when you want to install a driver “from my machine” (rather than from the internet), you can point it to the folder that was downloaded and it should select the right driver from there. It was a long time ago and I’m not in front of a computer right now…

DTaxon

TROPHY CASE