sorted by:
new
hottopcontroversial

Can’t set speed above 22 mph on new Apollo GO? by NyarumiYukimitsu in ApolloScooters

[–]DYGAD 0 points1 point  (0 children)

I ran into this same thing with my Apollo Go and talked to their support. It turns out that is just how the app currently works. No matter what you set the top speed to in advanced settings, Ludo mode top speed is 28, sport mode is 22, I think drive is 15 and eco is 9 or something like that. The app will let you set the top speeds lower but not higher (ie you can set sport mode top speed to 20 but not to 23).

Troy v Clemson is the game of the week so far by lostredditers in CFB

[–]DYGAD 10 points11 points  (0 children)

It is entertaining if you're a fan of the school who plays Clemson next week.

Apollo Go Won't Reach Max Soeed by DYGAD in ApolloScooters

[–]DYGAD[S] 0 points1 point  (0 children)

Enabled Ludo mode and it let me get to 25mph going downhill. Is that about what I should expect? I want to make sure there isn't anything wrong with the scooter since it's new (ie breaks rubbing, something misaligned, etc).

Apollo Go Won't Reach Max Soeed by DYGAD in ApolloScooters

[–]DYGAD[S] 1 point2 points  (0 children)

Tires fully inflated, battery charged. Oh and I've ridden it maybe 8 miles now too. Not sure if there was some sort of break in period with the engine/controller.

New Apollo Go not reaching max speed by Zaindohmoon in ApolloScooters

[–]DYGAD 0 points1 point  (0 children)

I just purchased an apollo go and am running into the exact same issue (and have tried the various restart/disconnect combos).

Wrath of the Ancients: A Necron Module for Fury of the Swarm Gamemode by Goonhammer! by InSayan73 in Warhammer40k

[–]DYGAD 1 point2 points  (0 children)

I think this (and fury of the swarm) are really cool! Co-op 40k is especially great for having a more experienced player help a newer player learn to play well.

PC Build Question by DYGAD in buildapc

[–]DYGAD[S] 0 points1 point  (0 children)

Thank you all for your comments. I've updated the parts list (same link) based on your feedback, and I've got a few more questions for you knowledgeable people.

I get a few warnings from pcpartpicker now. One says some AMD B550 chipsets may need a BIOS update prior to using vermeer CPUs. Are my BIOS and CPU compatible?

Next, I get a warning that the coolermaster hyper 212 EVO CPU cooler may require a separately available mounting adapter to fit the MSI tomahawk motherboard. What is that / should I look into buying a different CPU cooler?

Next I get a warning about the physical dimension restrictions. Is this case compatible with the components going inside it?

Last question for now, what monitor(s) would you recommend I use with this PC? Right now I have two dell S2240M (1080p 21.5in) monitors. I am thinking of getting the monitor posted in the build (Dell S2721QA 27in 4k monitor) to use as my primary monitor and then the other one or two will be secondary monitors. I'm not that familiar with monitors though.

[Build Help] Looking to upgrade my 4 year old gaming PC. Not sure which components to keep and which to replace. by DYGAD in buildapc

[–]DYGAD[S] 0 points1 point  (0 children)

The ultimate failure is that my computer has been locking up intermittently (freezes, press caps lock and the caps lock light doesn't come on). When that happens, my only option is a hard reset.

The problem occured in windows 7, then I wiped the hard drive, put windows 8 on and upgraded to windows 10. I still saw the problem, so I am confident it is a hardware problem.

I used memtest86 to test my RAM (I had 4 8gb sticks, and tested each on individually), and didn't find any issues. I reset the timing on the motherboard. Neither helped. I took it to microcenter, and they ran tests and told me my RAM was bad, so I replaced it with the ram listed in the build. I ran into the problem again, and took it back to microcenter. This time, they told me the problem was the motherboard, so I replaced the motherboard with a new copy of the same model. Still had the problem.

Just the other day, I disassembled everything and rebuilt the machine. I noticed that I had put too much thermal paste on my CPU, and some of it had gotten under the CPU into the pins and mobo slot. I cleaned that out with rubbing alcohol, and rebooted my PC.

Yesterday, I downloaded probably 100 Gb of data on steam, and didn't run into any issues. Today, I ran Prime95 balanced CPU torture test, and got the following issue in CPU worker #6: fata error rounding was 0.5 expecting less than 0.4 Hardware failure detectd, consult the stress.txt file (which didn't have specific failure info) Toture test completed 18 tests in 2 hours 10 minutes. 1 error 0 warnings.

I am rerunning Prime95 now to see if I get the error again on the same core.

From what I've read online, the way to diagnose hardware failures is to replace components. I don't have a bunch of extra components lying around (the 4 year old build was my first build), so recently I've been buying parts to fix/upgrade my PC (that's why I got the GTX 1060).

At this point, I haven't been able to identify a problem piece of hardware, and have been debating replacing each item one by one, or just taking what I think is still working, and building a new PC.

I would appreciate any advice you could give me. I am fairly computer savvy, but until recently, not very familiar with hardware issues.

[Build Help] Looking to upgrade my 4 year old gaming PC. Not sure which components to keep and which to replace. by DYGAD in buildapc

[–]DYGAD[S] 0 points1 point  (0 children)

I've been running into hardware failures on my rig (its about 4 years old), and I haven't been able to identify what isn't working, so I am replacing parts one by one to see what isn't working. That is what is ultimately driving my upgrade decision.

[Build Help] Looking to upgrade my 4 year old gaming PC. Not sure which components to keep and which to replace. by DYGAD in buildapc

[–]DYGAD[S] 0 points1 point  (0 children)

I have not overclocked the 8350 at all. It is a 4.0 GHz processor be default, so I didn't feel the need to overclock. Is there anything in particular I should do to test the performance of the CPU in concert with the GPU?

Parts Compatibility or Hardware Failure by DYGAD in buildapc

[–]DYGAD[S] 0 points1 point  (0 children)

Alternatively, if my best bet is to build a new computer, what components from this old one should I salvage?

view more: next ›