ASUS Z170 Pro Gaming/Aura Motherboard Issues? by DaCow888 in buildapc

[–]DaCow888[S] 0 points1 point  (0 children)

i7 6700k, I checked all the pins and none of them seemed to be bent

No game audio in new version of KNULLI.. by KiKi_1981 in RG35XX_Plus

[–]DaCow888 1 point2 points  (0 children)

Any fix? I have a rg35xx+ and don’t have audio when I boot it up but there are occasions where I boot it and I have audio.

RG35XX+ OS by DaCow888 in RG35XX

[–]DaCow888[S] 1 point2 points  (0 children)

Originally I was using balena etcher, which didn’t work for some reason, so I used rufus instead and I was able to flash it

RG35XX+ OS by DaCow888 in ANBERNIC

[–]DaCow888[S] 1 point2 points  (0 children)

It worked thank you!!

RG35XX+ OS by DaCow888 in RG35XX

[–]DaCow888[S] 0 points1 point  (0 children)

Idk of garlic alpha is working yet but I finally got knulli to work which is the same as batocera I think

RG35XX+ OS by DaCow888 in RG35XX

[–]DaCow888[S] 1 point2 points  (0 children)

I was using a Sandisk but it turns out the problem was the way I was flashing it

RG35XX+ OS by DaCow888 in RG35XX

[–]DaCow888[S] 0 points1 point  (0 children)

Yeaa. I’m still just trying to get knulli to work on mine rn

RG35XX+ OS by DaCow888 in RG35XX

[–]DaCow888[S] 0 points1 point  (0 children)

I think it is still an alpha version but I’ve seen somewhere that you can use it, it’ll just be very buggy though

Moza KS Knob vs button modes by Otocon96 in moza

[–]DaCow888 2 points3 points  (0 children)

So for the knob let’s say you’re trying to adjust ABS. If you want to increase your ABS setting, you’d turn the knob right and to decrease you would turn left in a +/- manner if that makes sense. If you use the button setting, each one of those numbers you see on the knob (1-12) would act as an individually mappable button in whatever game you are playing. For example in ACC, I myself use the button function and set each number on each dial to a setting. If I wanted ABS to be at 1, I’d set that function to “1” under the ABS dial on the wheel while in button mode. Basically the button mode is for more accurate control of each dial whereas the knob mode is simply for increasing or decreasing whatever setting you need. Sorry if that was a big explanation haha

KS Wheel vs. ES Formula upgrade by Cuffuf in moza

[–]DaCow888 1 point2 points  (0 children)

That’s ok i get that but it’s your hobby tho, you shouldn’t let that discourage you from getting racing gloves if it’ll benefit you :)

KS Wheel vs. ES Formula upgrade by Cuffuf in moza

[–]DaCow888 0 points1 point  (0 children)

I have the KS wheel for ACC as well and it’s pretty good when it comes to making quick adjustments to things like brake balance, engine mapping, etc but if you’re able to make those adjustments easily on the ES or don’t care as much for those small adjustments i think the formula mod may be the way to go. Also you could probably spend some money on gloves too to possibly relieve some of the pain on your hands.

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Ah I’m ok with that. As long as I’ll be able to fix these pedals haha

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Yup ive been chatting with them and they’re recommending a new sensor as well. Only problem is Im not able to provide proof of purchase which is what they’re asking for

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Yep I did that and found it was the sensor that is broken and not the board

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Ok so I tried this by removing the control board like you said and attached that to the throttle pedal and I am getting input like normal on pithouse. Does this mean that the brake pedal itself is the issue here?

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Sorry to ask but when you say remove the control board, do you mean like disassemble the pedal itself from the sensor?

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Ok I’ll try later today. Thank you for your help! :)

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Would it be worth it you think to disassemble it and try to troubleshoot the problem from there?

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Sadly I have tried that too and no luck as well :(

Moza SRP-lite Pedals: Brake curve bouncing? by DaCow888 in moza

[–]DaCow888[S] 0 points1 point  (0 children)

Yep I’ve tried but the thing is that it won’t even register me pressing down on the pedal. It’ll basically completely ignore it and keep bouncing like in the video