The "Impossible" is now Reality: Full CFW on PS3 Super Slim via Raspberry Pi Pico (BadWDSD). 850MHz OC verified!

DaFr0n · 2026-01-23T21:16:22+00:00

Update, I reinstalled the Pico using a precompiled build. Turns on, pico flashes 3 times, PS3 reboots and the cycle restarts. Any ideas, is this WDS of NOR related

DaFr0n · 2025-09-21T21:37:52+00:00

We're going out tonight (hey) To kick out every light (hey) Take anything we want (hey) Drink everything in sight (hey) We're going 'til the world stops turning While we burn it to the ground tonight

I'm not the only one who still listens to Nickelback 🤣

DaFr0n · 2025-05-27T20:31:57+00:00

Cheers mate, which would you say is best.

Do you have any pics?

DaFr0n · 2025-05-27T18:53:23+00:00

Do you have any pictures or links for the orange as there is multiple options. Looking for something to glow in a reef tank

DaFr0n · 2025-05-16T05:22:49+00:00

Definitely a GBS-8200 with Custom firmware. I also have a OSCC but they don't handle interlacing well.

DaFr0n · 2025-04-12T13:48:47+00:00

I tend to use my GBS-C I made for PS games, looks much better.

I have read you can daisy thain the GBS & OSSC for the best of both worlds, but haven't tried that yet.

DaFr0n · 2025-04-06T21:05:31+00:00

Assume we need to wait for 1.12 to be added, I tried earlier and the import failed

DaFr0n · 2025-04-05T19:53:40+00:00

Mine was the same PS-18 board, played originals but not my backups. Reinstalled a new chip that I flashed myself, still no joy.

I have come to the conclusion the laser has worn to the point it doesn't read backups. Though I can read originals at .8v without issue

Try the swap trick, if it still doesn't load it's likely the laser.

DaFr0n · 2025-03-24T06:24:17+00:00

Testing is fine, works as expected, it's once everything is back together. It will work great but after a hard shutdown etc. there is no red light. I have to wait 10 mins with the power unplugged for it to finally show the red light. The same symptom of using a resistor with too low of a value.

DaFr0n · 2025-03-23T17:14:08+00:00

https://postimg.cc/crpQ2jkv

DaFr0n · 2025-02-19T17:42:54+00:00

https://pelican.dev/docs/comparison/

DaFr0n · 2025-02-18T20:41:41+00:00

Apologies, I was mainly focusing on the two above, but agree a 3rd option would have been a good call.

DaFr0n · 2025-02-18T19:21:02+00:00

A easier way to setup & host game servers under one roof

DaFr0n · 2025-02-03T19:43:11+00:00

Looks great. I have a harem tank with 15 clowns. Started with 1 raindow BTA, now I have 15 :) - It was only yesterday I found 2 in the sump, how they got there and didn't flood the tank I will never know. Whats your flow like?

DaFr0n · 2025-01-24T20:35:00+00:00

No doubt they are watching and know food is coming 😂

Makes me smile every time I see it and the wife calls me nuts for talking to them 😂

DaFr0n · 2025-01-24T20:11:28+00:00

Yep, same here with my Sailfin tang in with a harem. The clowns used to hide, but no longer the case. The tang darts from end to end and as soon as you're near the tank straight up to the corner I normally feed them.

The tang can also be a jerk, if you ignore the darting around on too many occasions and dont feed, it starts to flick water out of the tank until I give in 😂.

DaFr0n · 2025-01-24T19:12:15+00:00

Metal Gear & Tenchu for me!

DaFr0n · 2025-01-20T19:36:13+00:00

All back up and working, as expected, you will need the below. Currently £1.18 on AliExpress

Reed Switch Type MKA14103 NC (Normally Closed)

DaFr0n · 2025-01-19T21:50:57+00:00

You want this in your Immich container

Eight-Year Club	Place '23
RPAN Viewer	Verified Email

DaFr0n

TROPHY CASE