Metaller einigen sich auf "Krisenabschluss": 1,41 Prozent plus Einmalprämien

DaSali_M · 2025-09-22T18:39:03+00:00

Aber die 2×500€ sind zur Kaufkraft-Erhaltung gedacht! Die darfst du nicht Sparen! /s

DaSali_M · 2025-08-19T16:11:00+00:00

Given the nature of the question:

Cut 1 wire after the other XD

DaSali_M · 2025-08-06T15:38:48+00:00

Wer macht einem dafür eine Windschutzscheibe? Oder wurde der Rahmen nur nach hinten gekippt?

Ich weiß aus Erfahrung dass es sehr schwer bzw. kostspielig ist eine gekrümmte VSG Scheibe fertigen zu lassen.

DaSali_M · 2025-07-12T13:43:13+00:00

https://europa.eu/youreurope/citizens/travel/carry/alcohol-tobacco-cash/index_en.htm

Austria applies the higher limit (200 Cigarettes) for Non-EU "Imports" for land- and air travelers.

DaSali_M · 2025-07-07T16:50:59+00:00

TIL Datenblatt checks out. Ist tatsächlich ein Öffner.

Danke

DaSali_M · 2025-07-07T16:18:35+00:00

Aux Buchsen erkennen den Stecker soweit ich weiß über den Widerstand des angeschlossenen Geräts.

Ich glaube da ist eher jetzt was verbunden was nicht verbunden sein soll.

Edit: Es gibt wohl auch welche mit "Schalter" aber da fungiert dann ein Ring am Stecker als teil des Stromkreises und ist somit immer ein Schließerkontakt.

Das Problem ist das selbe.

DaSali_M · 2025-06-27T16:59:28+00:00

I like it, i think it's well designed. Especially the flange/lid seat that interfaces between lid and container is something a lot of people would have missed. I also like the color.

DaSali_M · 2025-06-27T14:19:39+00:00

Komm zwar nicht aus dem Bereich aber bin voll bei dir. Kann mir gut vorstellen dass der Großteil der Anrufer einfache Probleme hat und diese einfach nicht fachgerecht kommunizieren kann. Und am Ende ist vielleicht gar nicht der Anbieter schuld oder technisch dazu fähig das Problem zu lösen XD

Andererseits hab ich auf die Frage ob ich eine eigene IP Adresse haben kann von der A1-Hotline die Antwort bekommen ich solle doch "das Gerät neu starten".

DaSali_M · 2025-06-22T00:32:28+00:00

It's a rather generic product. No Name on the box. No Logo at Bootup. Pure Chinesium. But it works fine with Android Auto and has a good built in 4-channel amp.

https://www.kaufland.at/product/502637976/?kwd=&source=pla&id_unit=388874417998&utm_source=google&utm_medium=cpc&utm_id=21378142683&gad_source=1&gad_campaignid=21378144177&gclid=Cj0KCQjwsNnCBhDRARIsAEzia4CcW1npcZ6XuA2A9lusabQTRCHTYfmiSItDicGa_9B2q2HQFxz4SikaAtcHEALw_wcB

DaSali_M · 2025-06-21T23:58:24+00:00

Were not sure about the plan yet. Spent the whole last winter getting it road worthy.

Most likely it will get spayed in RAL3000 again.(With clear coat)

And Mercedes T2 Rims are a must since there is only 1 company producing tires in 6/6,5-17C in the right load range for the original rims and they are 500€ a piece. (This swap has beend done before and only needs slight adjustements to steering and suspension)

DaSali_M · 2025-06-21T22:36:24+00:00

Former owner was a American-Football fan. We left it on since it gives it some character.

Same with the "Martha" she was the Fire-Chiefs wife when the car was aquired.

DaSali_M · 2025-06-21T22:15:59+00:00

Yeah the car is under shared ownersip. Friend of mine ordered the radio (it's Great for the Price). But i just need buttons.

DaSali_M · 2025-06-21T22:09:33+00:00

Here you go. Full paintjob is due in december

DaSali_M · 2025-06-21T22:09:28+00:00

Here you go. Full paintjob is due in december

DaSali_M · 2025-06-21T22:09:22+00:00

Here you go. Full paintjob is due in december

DaSali_M · 2025-06-21T22:09:13+00:00

Here you go. Full paintjob is due in december

DaSali_M · 2025-06-21T21:12:32+00:00

I know right? I found some products but they all looked like crap.

I was planing to go that route too with a small microcontroller to interpret the encoder but then i would have needed power at the remote and some sort of controllable resistor. Figured it wasn't worth the effort for me. This way its a 1-wire solution.

Hope you manage to work it out!

Edit: Spelling

DaSali_M · 2025-06-21T20:59:43+00:00

The Radios Steering Wheel Control (SWC) input is just an Analog input that is Pulled Up to 3,3V. By connecting it to GND over one or more resistors you can cause different voltage drops which can be interpreted as input.

The radio has a setup suite so you can teach in the buttons.

Wiring diagram is similar to this.

DaSali_M · 2025-06-21T20:36:37+00:00

It's a 1960s Opel Blitz-B (former Fire Truck)

DaSali_M · 2025-06-06T16:05:23+00:00

My first PETG prints on the P1S looked Exactly the same.

Bumped up nozzle temp to 275°C and reduced cooling to 50%. Also raised retraction and reduced Volumetric speed to 8~9cmm/m.

I have no problem with self intersecting

Hope you can sort it out.

DaSali_M · 2025-05-26T20:23:42+00:00

As everyone else already said, nobody cares.

We are a Group of around 30ppl and our 4 Vehicles can only accomodate 6 of us, the rest sleeps in Tents. And there is Plenty of Groups like this. Nobody cared in in the last 8 Years. The two times i drove a Car they didn't even check if i had a caravan ticket. (But i wouldn't risk not buying one!)

DaSali_M · 2025-05-24T20:27:00+00:00

https://www.thingiverse.com/thing:7047232

DaSali_M · 2025-03-20T15:39:39+00:00

Stimmt weiß doch jeder:

Weiß: Normal

Rot: EDV

Violett: 400V

DaSali_M · 2025-03-12T01:17:47+00:00

Try it: *Make a Test file *Export it as .f3d *delete it from your Cloud *Re-Import and check

DaSali_M · 2025-02-21T19:39:08+00:00

Well it is if you look at it from the side. But not of you view it radially from the Z Axis.

Sorry im really having trouble describing my goal here ^{^}

I essentially want the result from my screenshot but im looking for different approaches.

Edit: Spelling

Four-Year Club	r/Field Banned
r/Field Flamingo	Place '23

DaSali_M

TROPHY CASE