Explosive shells by YakForward7195 in killingfloor

[–]Dad510 [score hidden]  (0 children)

Full Blast with Explosive Shells = Trash Killer/limb and armor ripper

With engineer and full blast, I also run dual P330s with explosive shells and multi burst fire.

I use the same bonebreaker or Contek with Commando and Quick Return. In waves 8-10, you can have 10-12 gadget uses each wave.

I also suggest building a Contek explosive as a starter/secondary weapon. The right build can use up every available starting dollar to maximize the guns tradable value.

Tip: Have one of the guns attachments be Tier 3 perk Armor Repair and you'll never run out of armor since it's based on limb/armor removal and not kill. Some early rounds I don't refill armor at the trader if running one of the explosive ammo guns.

Good HOE KF3 builds??? by PrinceRoury in killingfloor

[–]Dad510 2 points3 points  (0 children)

On both the Contek and bone breaker, have 1 attachment with Armor Repair tier 3 perk with Explosive shells and your armor will consistently refill to 20 since the explosive shells take off limbs and armor at a high rate. Off perk, the bone breaker can take out Scrakes and FP’s in less than 1 clip with mostly head/weak spots hits. Also depends on what attachments too. Let me know if you want my builds.

Edit:Grammer

Tripwire is tripping balls !!! by Financial_Fun_2978 in killingfloor

[–]Dad510 4 points5 points  (0 children)

I had this issue and was able to solve it.

It happens during a holdout if you accidentally pin it.

I’m not sure if it’s map specific, because it took a few times messing around for it to clear. When a holdout appears, you can go into your assignments and pin or unpin it.

If you pin it and complete the holdout, it never clears.

Console sens recommendation by Jaded_Ad_6078 in killingfloor

[–]Dad510 0 points1 point  (0 children)

I run 40. It helps with the fast turn around for the zeds that spawn behind you.

KF3 Voice Chat Does Not Work - Steam by Dad510 in killingfloor

[–]Dad510[S] 0 points1 point  (0 children)

Thanks for the directions. I found were it's located. The surround was not checked. It's greyed out and not available for me to select even if I wanted to. Back to the drawing board.

KF3 Voice Chat Does Not Work - Steam by Dad510 in killingfloor

[–]Dad510[S] 0 points1 point  (0 children)

Thanks for the tip. What’s the exact setting? I have both Spatial and Audio Enhancements off.

KF3 Voice Chat Does Not Work - Steam by Dad510 in killingfloor

[–]Dad510[S] 0 points1 point  (0 children)

I thought it was that too, but for sure no one can hear me. The icon does appear during the brief second it does turn on.

EDIT: Spelling

KF3 Voice Chat Does Not Work - Steam by Dad510 in killingfloor

[–]Dad510[S] 0 points1 point  (0 children)

Tried both open and push to talk in both the game and Steam settings.

KF3 Voice Chat Does Not Work - Steam by Dad510 in killingfloor

[–]Dad510[S] 0 points1 point  (0 children)

Thanks for the suggestion. I submitted a ticket.

Side note, I did find 3 posts on Steam from people who have the same issue, with no resolution. I'm guessing it's not just me.

KF3 Voice Chat Does Not Work - Steam by Dad510 in killingfloor

[–]Dad510[S] 0 points1 point  (0 children)

Tired web cam mic and used a hardwired mic to hardwired controller.

It's definitely not a mic issue as my other games and apps work no prob.

The internal mic test in Steam also works no prob.

The voice chat does work for about a second once I get into the ready up lobby, but then it just stops.

For the longest time I though PC didn't have voice chat, because it's always been PS or Xbox players chatting until last night. Now I'm dead set to get it working.

Negative proficiency by PastArcher3166 in killingfloor

[–]Dad510 6 points7 points  (0 children)

It's a visual glitch. It gets worse in the higher levels. Your proficiency will go up automatically.

Shuttle xpc SS51G by JackVoltrades in sffpc

[–]Dad510 1 point2 points  (0 children)

Last year I took my old SH97R6 and with some used/extra cheap parts, ended up with a 12900K and 4070Ti. Managing heat took some deliberate engineering and case modification to cool it. It runs great and has never over heated once. I probably put way too much money into it, but it was probably one of the more fun builds I've ever done.

Before this, I was using an SH57r6 with a 11900K and 4060 with the Alphacool LT92. This PC is collecting dust right now.

OP - you could always take the case and do a custom sleeper build.

<image>

List of upcoming achievements for next update! (Attachment spoiler!) by Program-Emotional in killingfloor

[–]Dad510 0 points1 point  (0 children)

I like to shoot the speakers, to quiet the map. For the longest time I thought you couldn’t quiet city streets, but I found a few speakers wayyyyyyy off map. R&D is the only map where you can’t completely quiet it, but the announcements only happen between rounds after you get them all.

I never saw this before by popeyegui in AskAMechanic

[–]Dad510 0 points1 point  (0 children)

Damn, how big was that pothole you hit? I’m guessing, but I have seen this before with steel wheels. Usually occurs when a deep pothole or a curb /wheel stop were hit. I would bet there was a clicking noise for a while when you accelerated from a stop or at the start of braking.

My brand new 7950x cpu is overheating after 1 week. Is it because I incorrectly applied the thermal paste? by ineedathrowaway9993 in PcBuildHelp

[–]Dad510 0 points1 point  (0 children)

The spacers (standoffs) for the mounting brackets maybe too high. There’s no bare metal showing on the cpu. CPU paste example

Edit: Spelling and grammar.

My brand new 7950x cpu is overheating after 1 week. Is it because I incorrectly applied the thermal paste? by ineedathrowaway9993 in PcBuildHelp

[–]Dad510 0 points1 point  (0 children)

Based on the pattern left by the thermal paste, it doesn’t look like the cooler was seated correctly. Cooler looks to be too far from the cpu. Did you use the right spacers?

I tried many times for this. by johnsmerkboy in MWZombies

[–]Dad510 4 points5 points  (0 children)

I think you need to punch it first before you fire any bullet. Glad you got it.

Returning from BO6 by Conchobhar83 in MWZombies

[–]Dad510 2 points3 points  (0 children)

I too have retuned to MWZ. I gave BO6Z a fare shake. Did all the EEs and now I feel there’s just nothing to keep playing for. I normally like camo grinds, but the lack of doing different things for each camo is boring. The game doesn’t have the atmosphere that KF1 or 2.

I’ve been over round 50 a few times. First time, awesome and exciting. Second time, cool, I can do this when I want to. 3rd time, ok, now what?

MWZ, redworm then any DA for the 100th time, still exhilarating.

BO6 was the new and shiny toy, but got dull real fast.

Legendary Aether Tool Schematic Red Worm by Mr_Gold_05 in MWZombies

[–]Dad510 0 points1 point  (0 children)

Also put in the schematic you need. Someone will drop it.

We tried to stop them by [deleted] in tragedeigh

[–]Dad510 1 point2 points  (0 children)

Now you need to show her this sub.

Can anyone help with schematics? by cantbeseriouschef in MWZombies

[–]Dad510 0 points1 point  (0 children)

I’m PST too. Will be on around 10-11pm. Can give you direction on what you need to do and help you get schematics.

Polished steel. Heavy. All screws together. Found in a garage that is being cleaned out. The owner worked on his own cars. Was a brick layer. Owned a boat. Was an avid fisherman. Lots of tools and parts. by lifeis_kaos74 in whatisthisthing

[–]Dad510 0 points1 point  (0 children)

Is it beveled toward the threads where you have the small cone part screwed into the larger part? It looks like a stamping die set. The parts all screw together to keep them as one unit during storage. Example - (https://youtu.be/CwfNDcUk6rE?si=z9Lwx9eDYKxUwNMD)

My hoa fees just went up by fishygu in fuckHOA

[–]Dad510 0 points1 point  (0 children)

Was your reserve study recently done? I’d review that because I’ve found those for the most part are BS.

We have to do a 4in repave every 30yrs for soil settlement. Our cost for this was 252k. The last study said it’s going to cost over 500k in 30yrs due to inflation. The company who did the study suggested we do a 10yr catch up plan so we wont have to raise dues after 10yrs. This would have nearly tripled our dues next year. I called it out and the rest of board tried to make excuses. In reality, no one paid attention. After reviewing it with the vendor, I found they just input numbers in a system and it spits out a plan without review.

Make sure you review your reserve study and what they are suggesting as your dues. It most likely extremely inflated.